This is actually a pretty good video, keep up the good work!!! 👍🏼
@cocomuncha76673 жыл бұрын
You just found yourself a new friend from New Zealand 🇳🇿. Now keep em video coming ✌️👍💓
@LuisRodriguez-xf9lv3 жыл бұрын
Very well don video and clean job. congrat for that New Born.
@nightscrapperuk133 жыл бұрын
Hi just subscribed to your channel. Great video I really like gold recovery videos 👍
@welshdragonmetals3 жыл бұрын
Awesome 👍♻🛠Nice Weight out of them black caps.
@julianalcorso57032 жыл бұрын
Hi, Good vid, extraordinary yield! A couple of constructive comments if I may? Use a little more SMB. Check the supernatant to make sure all the gold has in fact dropped. Just pour off the clear liquid from the settled gold. Wash the gold powder with HCL (preferably boil in HCL for 5 minutes X 3) then boil in water 3 - 5 times pouring off after each boil. When done simply slide the washed powder into your melt dish. A spray of water may help. Keep up the good work.
@joelarimore8135
Жыл бұрын
I've seen people use water and ammonia washes, do you think that's effective?
@julianalcorso5703
Жыл бұрын
@@joelarimore8135 Indeed! I boil in distilled water x 5 times then in HCL X 5 times then in Distilled water X 3 times then in Ammonia X 3 times then in distilled water X 5 times!!! A lot of rinsing especially if you refine 3 to 5 times. I only do this if I am chasing 5 9s pure. Good luck
@joelarimore8135
Жыл бұрын
@@julianalcorso5703 Thank you so much, yes I'm going for triple 9 😉
@julianalcorso5703
Жыл бұрын
@@joelarimore8135 For me, the key is in the rinsing. Tripple 9s is relatively easy and should only need 2 refinings. 5X9s requires 4 or 5 refinings, dropping with different reagents and multiple rinsings at each refining. A lot of work for no extra return save the satisfaction of having done it. Enjoy!
@marcelotrindade58922 жыл бұрын
Beautiful Gold thank
@bahasaindonesiasma95012 жыл бұрын
I love to see it ❤️
@user-wq7ip6hr2m3 жыл бұрын
Гуд харошая работа 😎
@ThunderboltWisdom3 жыл бұрын
Nice! 🤓🤘🏴
@paulscottpadgett1996 Жыл бұрын
Excellent video
@azmazm8556 Жыл бұрын
Нормально выходит с чипов, но их уже сложно найти. 🔥👍
@kalaiyarasisami3716 Жыл бұрын
Beautiful sir video
@indeedItdoes2 жыл бұрын
Nice work
@bakulrongsokberkah97413 жыл бұрын
Mantap mister good
@ivsongold3223 жыл бұрын
Very good 👏
@chosen1one9303 жыл бұрын
Always use something as a overflow or just in case your beaker breaks, saves your ass from making a big mess
@joek511Ай бұрын
Nice to see. I just got a about 200 of them. 2 lbs or so. Was trying to decide, do I wet ash, as you did, or burn them. Burning them is so much work. I think wet ash is the way Im going. By the way, concentrated sulfuric will digest silver (silver sulfate). It can be recovered with a bit of HCL added to the Sulfuric to produce silver chloride. filter , rince then use the lye and sugar method to recover 999 silver. Not sure the recovery would be worht the effort but it can be done.
@ogbullion
Ай бұрын
If you want the silver from these, burning is the way to go. I think its almost impossible to recover the silver from the thick syrupi black sulfuric sludge, but maybe im wrong.
@BullProspecting3 жыл бұрын
The ones with the metal caps are copper heat sink. I would separate them. This will get you a cleaner recovery!
@ogbullion
3 жыл бұрын
I already removed the heatsinks before the sulfuric acid treatment. Thanks for watching!
@DASMARKUSS8 ай бұрын
CREO QUE CUANDO FILTRASTE QUEDARON MICROPARTICULAS DE ORO SIN DISOLVER POR LA PPCA CANTIDAD DE NITRICO QUE LE PONES AL AGUA REGIA .
@lahorigoldsmith85703 жыл бұрын
full guidline thank you
@shaneyork3003 жыл бұрын
Sweet
@speedntfs70213 жыл бұрын
nice
@mrgreenswelding28533 жыл бұрын
That's a big yield for 150 grams of bag tops.
@crazydad84002 жыл бұрын
When your making your Aqua regia what percentage are your acids . Your video is really good and simple to follow Many thanks
@ogbullion
2 жыл бұрын
Thank you! The concentration of the HCL is 30% the nitric is 65 %.
@babisant39323 жыл бұрын
Hello , I am new to the process of recovering gold. I found your video interesting , but answer my question. For the precipitation of gold you use Potassium Metabisulphite and in other videos I have seen them use Sodium metabisulfite. Are we talking about the same product and if not what is their difference and their effectiveness? Thank you in advance for your reply.
@ogbullion
3 жыл бұрын
Hello! Not the same but work the same, maybe the potassium work slower, only reason I use potassium metabisulfite beacuse it's easier to get in my country.Thanks for watching! 👍
@babisant3932
3 жыл бұрын
@@ogbullion I thank you for the answer!!
@mehmetaliylmaz5129
2 жыл бұрын
hello, were you able to recover the gold by following the steps in this video?
@ANDYGLEGENDSSINGАй бұрын
Prefer this to the ashing method
@kevinsturgess14759 ай бұрын
👍
@russellangellimalima4746 Жыл бұрын
Show Love
@ogbullion
Жыл бұрын
❤
@Random_44002 жыл бұрын
Tbh i was more excited to see what's inside the chips rather than the gold
@user-yu5ol5vz7q3 ай бұрын
Лайк вам 😊
@davidbarron1073 жыл бұрын
very good video keep it up.what are you using as your Charmin plug.what material do u use for the filter.thanks in advance
@ogbullion
3 жыл бұрын
Thank you! The Charmin plug is cosmetic cotton pad, the filter is a coffe filter. But this is the last time I use coffe filter for gold recovery because too many times fails.Thankfully today got my lab filters vacuum flasks, and Buchner funnel delivered.
@davidbarron107
3 жыл бұрын
@@ogbullion very good.wish you the best. I'm currently waiting on my buchner funnel and filter flask too.slowly gathering all my stuff. I'll stay tuned to see what videos you have coming uo
@sagarugolden37983 жыл бұрын
You nice job Boss, 👍
@raducatalin63132 жыл бұрын
Do you have any idea if the ic chip and bga chip from the old phones have a higher gold content of 1 kg, compared to 1 kg of black top bga gold corner from the motherboards, etc.?
@ogbullion
2 жыл бұрын
I dont know. But if those chips similiar like the RAM BGA's I doubt the higher gold content.
@Random_44002 жыл бұрын
Nice but i want to keep my 1000$ GPU in working condition lol :) idk if it's worth going through this hassle to retrieve such a small amount
@user-et3hd9hb9c3 жыл бұрын
Gorgeous What material did you add in the 9.20 minute ??solfmic acir or acitat sodum ??
@ogbullion
3 жыл бұрын
Thank you! Sulfamic acid to neutralize the excess nitric acid.
@denizd.95352 жыл бұрын
Can Northern chipsets be used with southern chipsets?
@ogbullion
2 жыл бұрын
Yes.
@safimalik71533 жыл бұрын
Kindly tell me percentage of HCL and nitric acid to make aqua rigia
@ogbullion
3 жыл бұрын
Nitric, HCL 1:3
@denizd.95352 жыл бұрын
Also, what is the concentrated nitric acid ratio? So what %? :)
@ogbullion
2 жыл бұрын
In this video I used 3-4 ml nitric acid + 100 ml HCL to dissolve the gold, 3-4:100 or 3-4%
@hford4012 күн бұрын
So no heat needed? Is that correct?
@ogbullion
10 күн бұрын
Only when the gold drop out of solution.
@hassanhassan-wj9eu3 жыл бұрын
potassium metabisulfite or sodium metabisulfite
@ogbullion
3 жыл бұрын
I use potassium metabisulfit. Both works the same.
@soileartandbreath38342 жыл бұрын
sir what do you mean by just con.nitric acid is it normal nitric acid? Thanks gör video
@ogbullion
2 жыл бұрын
Cocentrated nitric acid (65-67%)
@soileartandbreath3834
2 жыл бұрын
@@ogbullion one last question, at what time do you neutralize the solution, you are very good, thank you
@ogbullion
2 жыл бұрын
@@soileartandbreath3834 8:49
@denizd.95352 жыл бұрын
Do you use urea in any part of the process?
@ogbullion
2 жыл бұрын
Nope. I only use sulfamic acid to denox.
@denizd.9535
2 жыл бұрын
@@ogbullion thank you for the answer
@derrecycler17702 жыл бұрын
Kommst Du aus Belgien?
@ogbullion
2 жыл бұрын
No.
@arnaudlelong23422 жыл бұрын
Hey buddy, which grade of K₂S₂O₅ did you use?
@ogbullion
2 жыл бұрын
Hi, food grade.
@arnaudlelong2342
2 жыл бұрын
@@ogbullion Thanks buddy, I dig your videos.
@ogbullion
2 жыл бұрын
@@arnaudlelong2342 Thank you, I realy appreaciate!
Пікірлер: 75
Nice clean job with a great drop. 👍
This is actually a pretty good video, keep up the good work!!! 👍🏼
You just found yourself a new friend from New Zealand 🇳🇿. Now keep em video coming ✌️👍💓
Very well don video and clean job. congrat for that New Born.
Hi just subscribed to your channel. Great video I really like gold recovery videos 👍
Awesome 👍♻🛠Nice Weight out of them black caps.
Hi, Good vid, extraordinary yield! A couple of constructive comments if I may? Use a little more SMB. Check the supernatant to make sure all the gold has in fact dropped. Just pour off the clear liquid from the settled gold. Wash the gold powder with HCL (preferably boil in HCL for 5 minutes X 3) then boil in water 3 - 5 times pouring off after each boil. When done simply slide the washed powder into your melt dish. A spray of water may help. Keep up the good work.
@joelarimore8135
Жыл бұрын
I've seen people use water and ammonia washes, do you think that's effective?
@julianalcorso5703
Жыл бұрын
@@joelarimore8135 Indeed! I boil in distilled water x 5 times then in HCL X 5 times then in Distilled water X 3 times then in Ammonia X 3 times then in distilled water X 5 times!!! A lot of rinsing especially if you refine 3 to 5 times. I only do this if I am chasing 5 9s pure. Good luck
@joelarimore8135
Жыл бұрын
@@julianalcorso5703 Thank you so much, yes I'm going for triple 9 😉
@julianalcorso5703
Жыл бұрын
@@joelarimore8135 For me, the key is in the rinsing. Tripple 9s is relatively easy and should only need 2 refinings. 5X9s requires 4 or 5 refinings, dropping with different reagents and multiple rinsings at each refining. A lot of work for no extra return save the satisfaction of having done it. Enjoy!
Beautiful Gold thank
I love to see it ❤️
Гуд харошая работа 😎
Nice! 🤓🤘🏴
Excellent video
Нормально выходит с чипов, но их уже сложно найти. 🔥👍
Beautiful sir video
Nice work
Mantap mister good
Very good 👏
Always use something as a overflow or just in case your beaker breaks, saves your ass from making a big mess
Nice to see. I just got a about 200 of them. 2 lbs or so. Was trying to decide, do I wet ash, as you did, or burn them. Burning them is so much work. I think wet ash is the way Im going. By the way, concentrated sulfuric will digest silver (silver sulfate). It can be recovered with a bit of HCL added to the Sulfuric to produce silver chloride. filter , rince then use the lye and sugar method to recover 999 silver. Not sure the recovery would be worht the effort but it can be done.
@ogbullion
Ай бұрын
If you want the silver from these, burning is the way to go. I think its almost impossible to recover the silver from the thick syrupi black sulfuric sludge, but maybe im wrong.
The ones with the metal caps are copper heat sink. I would separate them. This will get you a cleaner recovery!
@ogbullion
3 жыл бұрын
I already removed the heatsinks before the sulfuric acid treatment. Thanks for watching!
CREO QUE CUANDO FILTRASTE QUEDARON MICROPARTICULAS DE ORO SIN DISOLVER POR LA PPCA CANTIDAD DE NITRICO QUE LE PONES AL AGUA REGIA .
full guidline thank you
Sweet
nice
That's a big yield for 150 grams of bag tops.
When your making your Aqua regia what percentage are your acids . Your video is really good and simple to follow Many thanks
@ogbullion
2 жыл бұрын
Thank you! The concentration of the HCL is 30% the nitric is 65 %.
Hello , I am new to the process of recovering gold. I found your video interesting , but answer my question. For the precipitation of gold you use Potassium Metabisulphite and in other videos I have seen them use Sodium metabisulfite. Are we talking about the same product and if not what is their difference and their effectiveness? Thank you in advance for your reply.
@ogbullion
3 жыл бұрын
Hello! Not the same but work the same, maybe the potassium work slower, only reason I use potassium metabisulfite beacuse it's easier to get in my country.Thanks for watching! 👍
@babisant3932
3 жыл бұрын
@@ogbullion I thank you for the answer!!
@mehmetaliylmaz5129
2 жыл бұрын
hello, were you able to recover the gold by following the steps in this video?
Prefer this to the ashing method
👍
Show Love
@ogbullion
Жыл бұрын
❤
Tbh i was more excited to see what's inside the chips rather than the gold
Лайк вам 😊
very good video keep it up.what are you using as your Charmin plug.what material do u use for the filter.thanks in advance
@ogbullion
3 жыл бұрын
Thank you! The Charmin plug is cosmetic cotton pad, the filter is a coffe filter. But this is the last time I use coffe filter for gold recovery because too many times fails.Thankfully today got my lab filters vacuum flasks, and Buchner funnel delivered.
@davidbarron107
3 жыл бұрын
@@ogbullion very good.wish you the best. I'm currently waiting on my buchner funnel and filter flask too.slowly gathering all my stuff. I'll stay tuned to see what videos you have coming uo
You nice job Boss, 👍
Do you have any idea if the ic chip and bga chip from the old phones have a higher gold content of 1 kg, compared to 1 kg of black top bga gold corner from the motherboards, etc.?
@ogbullion
2 жыл бұрын
I dont know. But if those chips similiar like the RAM BGA's I doubt the higher gold content.
Nice but i want to keep my 1000$ GPU in working condition lol :) idk if it's worth going through this hassle to retrieve such a small amount
Gorgeous What material did you add in the 9.20 minute ??solfmic acir or acitat sodum ??
@ogbullion
3 жыл бұрын
Thank you! Sulfamic acid to neutralize the excess nitric acid.
Can Northern chipsets be used with southern chipsets?
@ogbullion
2 жыл бұрын
Yes.
Kindly tell me percentage of HCL and nitric acid to make aqua rigia
@ogbullion
3 жыл бұрын
Nitric, HCL 1:3
Also, what is the concentrated nitric acid ratio? So what %? :)
@ogbullion
2 жыл бұрын
In this video I used 3-4 ml nitric acid + 100 ml HCL to dissolve the gold, 3-4:100 or 3-4%
So no heat needed? Is that correct?
@ogbullion
10 күн бұрын
Only when the gold drop out of solution.
potassium metabisulfite or sodium metabisulfite
@ogbullion
3 жыл бұрын
I use potassium metabisulfit. Both works the same.
sir what do you mean by just con.nitric acid is it normal nitric acid? Thanks gör video
@ogbullion
2 жыл бұрын
Cocentrated nitric acid (65-67%)
@soileartandbreath3834
2 жыл бұрын
@@ogbullion one last question, at what time do you neutralize the solution, you are very good, thank you
@ogbullion
2 жыл бұрын
@@soileartandbreath3834 8:49
Do you use urea in any part of the process?
@ogbullion
2 жыл бұрын
Nope. I only use sulfamic acid to denox.
@denizd.9535
2 жыл бұрын
@@ogbullion thank you for the answer
Kommst Du aus Belgien?
@ogbullion
2 жыл бұрын
No.
Hey buddy, which grade of K₂S₂O₅ did you use?
@ogbullion
2 жыл бұрын
Hi, food grade.
@arnaudlelong2342
2 жыл бұрын
@@ogbullion Thanks buddy, I dig your videos.
@ogbullion
2 жыл бұрын
@@arnaudlelong2342 Thank you, I realy appreaciate!