🙋‍♂ *FREQUENTLY ASKED QUESTIONS & OTHER INFO* 👇 *What speed and gear are you guys starting in?* All races were done from a 20-roll in first gear except for the race against the gen 1 yote where we started at 40 mph in 2nd gear. *What RPM are you shifting at?* Just under 7,100. *What's the ratio of your axle gear?* 4.10; 1st goes to about 52 mph, 2nd to upper 70's, and 3rd is about 105 mph. *Why didn’t you race a 10-speed Mustang, C6 Corvette, Kia Stinger, BMW M3, 6th-gen Camaro SS, GT350, 392 Challenger/Charger, or my GTI?* I don’t know anyone with those cars. *Huh come no dig races?* To reduce the impact of driver skill and tire/suspension setup on performance. The point of the races was to test the Mustang’s acceleration against better cars, not see which driver/setup could manage a better launch. *What fuel is the Mustang running?* All vehicles were on 91 octane. *Why don’t you run E85 or 93 octane?* Not available in my area, not even close unfortunately. *What exhaust setup do you have?* Kooks Long Tubes, catted x-pipe, and Pype Bomb axle-back. *What wheels are those?* The wheels have been discontinued, but they’re called Miro 112 and the setup is: - 19x8.5 +35 on 255/40 - 19x9.5 +40 on 285/40 *What bumper / splitter is that?* OEM GT/CS bumper with modified 07-09 GT500 splitter. *Why are you doing this?* It's fun.

@Faltye

2 жыл бұрын

“Never raced” RACES IT AGAINST HIS MUSTANG

@danielroberson5421

2 жыл бұрын

@@Faltye Sore loser lol.

@leomedina5614

2 жыл бұрын

What’s transmission did you swap your mustang to?

@willb2820

2 жыл бұрын

What camera do you use? crazy good quality

@christian103

2 жыл бұрын

@@Faltye lmfaoo I was like wdym by "never raced"

This HIGHLIGHTS how much gearing plays a role in racing. The mechanical advantage they create is overlooked far too often

@johngezon1220

2 жыл бұрын

Bingo, Engine specs are neat and all, but its vitally important how they get to the ground, Trans, Gearing, Tires, and even driver.

@romper4444

2 жыл бұрын

Yes, so very right sir. When I went from 3.08's to 3.73's in my '88 5L I couldn't believe it, I thought u mean This is all I had to do the whole time!

@ls3vstheworld223

2 жыл бұрын

@@johngezon1220 tell this to gm , with the failure of the c7s gearing , I really hope they put a 10spd in the c8zr1

@MS-mr4zm

2 жыл бұрын

Then when you start modding everything changes- you don’t want 4.10s on a blown C5 vette, for instance lol

@watchandjewelryloft4713

2 жыл бұрын

Exactly. It amazes me how much a simple hearing change can wake up a car. Or how newer cars are so quick with those 8-10 speed transmissions. I wish cars I had in the 90's-2000's could be fitted with a modern 10 speed or something. I'd love to see the difference. I had a 1998 Seville STS and a 2005 Grand Prix GTP Comp G. Pretty fun cars, but those 4 speed autos were so blah.

My Dad would have been proud to see this. He always saw potential in the 4.6. Sadly he passed away before getting to do what he wanted to his Shelby GT.

@equisequis.55

Жыл бұрын

sorry for your loss, he was right. there is potential in the 4.6. this video is proof

@Four_Eyes

Жыл бұрын

Time with the ones we love is everything. Very sorry to hear that brother.

@veljkomusic

11 ай бұрын

Rest in peace

@georgephifer7713

10 ай бұрын

Mine also he hated Chevy powered mustangs

@damonblackburn6666

10 ай бұрын

Atleast he had a shelby that would qualify for awesome IMO i have a 07 V6 and cant fathom why they are only selling mustangs now with 4 cylinder ECO or V8 only wtf and i really like how the new ones look but ill get a Mache E before the 4-Cylibder 😂

The 4.6 has always sounded SO GOOD. You can make it sound quite literally, almost exactly how you want it to. Yours sounds like one hell of a race car!

Man, the one thing about the 4.6 though. That sound is absolutely goddamned amazing. It's not hard to make that engine sound very, very good.

@GewelReal

Жыл бұрын

and yet here it sounds kinda bad

@FearlessLeader2001

Жыл бұрын

@@GewelReal you what?

@j.f-ou812

Жыл бұрын

@@FearlessLeader2001 Had a ford 2015 work van f250 and hearing that 4.6 from under that motor box inches from your seat and you awesome mtr

@danmyers9372

Жыл бұрын

Agree. The one (and only) thing I don’t like about the Coyote is the exhaust sound. They just sound like crap and the louder the exhaust the more obnoxious they sound.

@FearlessLeader2001

Жыл бұрын

@@danmyers9372 I couldn't disagree more. I think the way the coyote screams past 8000rpm is very enjoyable.

I just love how this video presents itself, just some friendly races to determine a study no fighting and no beef I love it

@TheOzthewiz

2 жыл бұрын

And NO cops!

@NATURALGAMING

2 жыл бұрын

Facts

@derricksmith6016

2 жыл бұрын

Hell yeah I agree with you HEAVILY

@BruceLee-xn3nn

Жыл бұрын

Current administration is the enemy.

@SPCLPONY

Жыл бұрын

Agreed, this video looked fun to do, and it was fun to watch. I think that's why a lot of the 'car' enthusiast shows quickly lose their viewers. They start off interesting, then some producer inserts drama to boost ratings. That's when I lose 100% desire to watch. Boyd Coddington and Orange County Chopper are examples. Too much fighting.

Quickest N/A 3 valve I've seen...nice work!

@Four_Eyes

2 жыл бұрын

thanks brew

@alecboswell5527

2 жыл бұрын

@@Four_Eyes absolutely insane!!! That’s one good running 3v. Holy crap!

@jesusisreal3209

2 жыл бұрын

@@Four_Eyes excellent video, I like that underdog aspect too

@privilegedwhitemale306

2 жыл бұрын

@@jesusisreal3209 Poor people like the underdog aspect because they can't buy anything else, and therefore are forced to like the underdog aspect.

@SasquatchS550

2 жыл бұрын

@@privilegedwhitemale306 the guy has a viper... Doesn't sound poor to me since the one he has goes for at least $45-50k. But you're the privileged white male so what do I know

I used to hate 4.6 stangs because I thought they were all slow without Forced Induction. I was truly shocked to see how well it can do Naturally Aspirated. I guess every 4.6 owner should install a new cam and stroker kit like this dude. Props.

@jooot_6850

Жыл бұрын

That’s what I’m thinking of doing whenever I get the money for it

@FANET0

Жыл бұрын

Depends what you consider a fast car 🤷🏿‍♂️

@jcav3232

11 ай бұрын

I think he also got some new gears for car based on when the mustang shifts vs the other cars. That makes a huge difference

@massvibe

11 ай бұрын

​@sk8n854 the problem with them that I have is the 2011 6 cylinder has 300 horsepower and that's what the GT put out from 05 to 10. Imagine buying a 2010 and the next year they bump it up to 400+

@massvibe

11 ай бұрын

@@sk8n854 OH don't get me wrong I love this particular Mustang. Sounds the shit and fast as hell. I was only talking about the big jump. I love the body style.

Much respect! Looks like a similar build to what I’m doing to my 99 cobra. I’ve never been a fan of these body styles or the 3v in general, but you’ve done really well with it!

A Mustang and a Camaro racing on a road in the snow had my palms sweating. Jokes aside, nice build.

@JETZcorp

2 жыл бұрын

Jokes, hell! I know what my Dakota R/T would've done in those conditions, and it doesn't include "hook up and go straight". That's with a BUNCH less power than these cars. They did great!

@bigdfitness5020

2 жыл бұрын

A little snow falling from the sky is no different than a light rain.

@dominicvega9267

2 жыл бұрын

You're a women then.

@anthonys7534

2 жыл бұрын

Good thing they weren’t leaving a car show😂

Looks like that 2019 stang got heat soaked the more runs y'all raced. Great job waking up that 4.6!

@amateurtouring

Жыл бұрын

Lol it’s not a “4.6” it’s a built stroker. He never mentions the actual displacement.

@8bert9

Жыл бұрын

@@amateurtouring You are right. If you read his google docs build sheet he has a MMR 5.0 STROKER Street Mod 1000S 5.0 Rotating assembly Up to 1000RWHP.

@amateurtouring

Жыл бұрын

@@8bert9 so by this guys logic I could call an LS7 swap an junkyard 4.8 swap? 😂

@8bert9

Жыл бұрын

@@amateurtouring lol, yeah, the title of the video is a bit misleading

@grumpywhiteman

Жыл бұрын

The factory tune pulls a TON of ignition timing once intake air temp gets over 100F and once coolant temp gets over 200F. Basically 1 degree of ignition timing for each 10F increase in air or coolant temp. So 220 coolant temp pulls 2 degrees and 150 air temp pulls 5 degrees. You’re down 7 degrees of timing advance, easily worth 35 HP

when you beat that bullit I was so impressed! awesome build man ad those shifts are sooo crisp! def inspired me for this build now for sure!

Super duper impressive. Love the Viper and much respect that the 4.6 can almost keep up !! Excellent documentation 😊

WOW...that 4.6 sounds heavenly. Performance be damned, I want one just for the sound.

@P71ScrewHead

2 жыл бұрын

i'm a 2v Panther guy n i say get you one, 4v swap it..

@danielroberson5421

2 жыл бұрын

It's actually a 5.0 now being bored .30.

@P71ScrewHead

2 жыл бұрын

@@danielroberson5421 the Mustang in the video or your car??

@jeremymyers5643

2 жыл бұрын

@@danielroberson5421 also said stroker kit

@danielroberson5421

2 жыл бұрын

@@P71ScrewHead Four Eyes's Mustang.

Nice car! Especially liked the Viper, I was a designer on the original version. Neat little story to tie in with this video. Back when the GTS was still a test bed car the head wrench of the mock up area did a big smokey donut on Michigan Ave in front of the Ford World HQ building, it was just down Southfield Fwy from Jeep Truck Engineering where the Viper was conceived.

@Four_Eyes

2 жыл бұрын

haha i love it. did you ever interface with Roy Sjoberg?

@charliedee9276

2 жыл бұрын

@@Four_Eyes Everyday, he was my boss. Well he was every one's boss there, lol.

@nate678

Жыл бұрын

That's awesome! Remember the TV show lol! I think the stealth R/Ts stole the show early tho!

@r1se_gg

Жыл бұрын

Noice

@dadrummagstag7626

Жыл бұрын

Thank you for helping make my dream muscle car

Love the time u put into these videos! And great buddies to help with material!

My son had a 2008 GT that looked quite a bit like your 07. Same color, and with the side window louvers. He was living at home at the time, and I would frequently take it out and have fun with it. Really liked it.

Camaro owner here - nice job with your 3 valve. You've got an impressive combo and it's always good to see a true car guy putting out quality real world videos. 👍

I’ve followed your journey building this motor and I’m glad to see that the hard work is paying off. I never get tired of seeing the 3v keep up with current gen mustangs, ESPECIALLY one that’s n/a! Also, I don’t think anyone can deny that the 3v has such a timeless design. Beautiful car dude, keep up the great content!

@Four_Eyes

2 жыл бұрын

thank you brother 🙏

@YuriDontPlay

Жыл бұрын

Beautiful car no lie

@repentandbelieveinjesuschr9495

Жыл бұрын

Repent to Jesus Christ “In your relationships with one another, have the same mindset as Christ Jesus:” ‭‭Philippians‬ ‭2:5‬ ‭NIV‬‬ D

@alvaroperez7879

Жыл бұрын

@@Four_Eyes bad ass ride! You and would be a great race! I have a 404whp GTI. You kept up for a little bit with that viper

@genogrinberg6014

Жыл бұрын

It's probably one of the ugliest American muscle cars out there. Especially this version.

So much work and dedication put in all this 🙌 thanks!

Thank you, great video for us old Mustang lovers.

My favorite part is that you took what you had and made it work. Much respect!

@willcool24

Жыл бұрын

Hell yea. His mustang is a beagreat job bro

@amateurtouring

Жыл бұрын

Lol by ditching the 4.6 for a stroker motor? He never mentions how big the new motor actually is.

@Dan12gt

Жыл бұрын

Definitely what she said 😏🤣

@Soknik01

Жыл бұрын

@@amateurtouring Ditching?? Dude kept his motor. It's displacement only changed because he stroked it. It's not like he had a race built crate engine dropped off in his driveway.

@RidinDirtyRollinBurnouts

Жыл бұрын

@@amateurtouring a stroker motor indicates a stroker kit was installed in the engine block. It's not a new motor per se. Your name fits your comment, jk :)

The early mod motors are no joke up to a certain power level. I suspect the Bullit pulled timing after the first run due to heat and or crappy fuel. Those are the most retro models of all the modern mustangs and they look great. Hot rodding to me isnt about being the fastest , it about making the car you have all it can be within you budget. Thanks for the great content.

@shannonsisk

2 жыл бұрын

Yea it was pulling power out from heat for sure. Good call

@fread51

2 жыл бұрын

3v mustangs are trash

@MrPorsche91730

2 жыл бұрын

I can afford rust. My car is so light rn

@shannonsisk

2 жыл бұрын

@@fread51 that’s why this one is cool

@bigdfitness5020

2 жыл бұрын

"Hot Rodding isnt about being the fastest, its about being the fastest your budget will allow" 😂😂

Great, clean video, and one heckuva car! Well worth the watch, and now I'm looking forward to watching the build vids! 👍👍

i rarely watch vids like this,it autoplayed and i was honestly surprised and enthralled too,Great Vid ~ Nice work on the Stang.

Yes I’ve always wanted someone to build a 4.6 like this with the gears, t56 and built N/A. Awesome video as always! And 3.73?

@mercedes.c63_audi.q8

2 жыл бұрын

4.10 gears maybe?

@Four_Eyes

2 жыл бұрын

4.10's, but with the 2.66 trans ratio you can see the gears are still a bit long, should be ideal for a turbo setup!

@nicolesmrekar2046

2 жыл бұрын

I still have 3.55, works well with my 5.3 stroker T56. But I do road course rather than drag.

@bullittoothtony4043

2 жыл бұрын

@@nicolesmrekar2046 😍😍😍

@shawncarson8131

2 жыл бұрын

@@Four_Eyes 4.30’s might just be the sweet spot for an all-motor T56 build like this. This thing runs good and it runs hard. Love what you’ve done with this car.

That is the quickest N/A 3 valve I have ever seen. Gives me hope for my car.

@midnight347

2 жыл бұрын

They're out there you don't see em much anymore because everyone just goes coyote and most people think a 3v can't even be fast because the internet says so. Alot of impressive 3v builds back before there was coyotes everywhere.

@gtdrummerdude

2 жыл бұрын

I had a 82 GT fox body with a 351W and 5 speed years ago. Junkyard build, 300 wheel/330 torque and 3,000 lbs on the dot. Car went 109 mph in the 1/4 with no traction first and second so it was decent. I ran one or two modded 3 valves and they were right next to me so they can be quick.

@TheEnd-eg6wq

2 жыл бұрын

@@midnight347 If you put the same amount of money into a Coyote, it'll vastly out perform the 3v, just have to decide if it's worth it.

@robertjebediahfreeman

2 жыл бұрын

@@midnight347 And the 3v sounds better than the coyote

@eman_98

2 жыл бұрын

@@midnight347 I think a lot of people just want to move onto different platforms. Chasing “stock numbers” or “fbo numbers”.as for boosting that’s a good hole category of its own that any vehicle can do with the right mods.

Great view. Beautiful cars. Soothing sounds. Straight forward production. And no shouting. High marks!

Thank you for this video, Sir - YOU are a Gentleman & a Scholar. God Bless you!

As a fellow 3V owner, huge THANK YOI for content like this! Your videos are top quality, giving stat breakdowns, power graphs, gains, and costs. I really appreciate the hard work.

@amateurtouring

Жыл бұрын

Top quality aside from the part where he won’t say how big this “4.6” really is after the stroker build.

@LegalLowGround

Жыл бұрын

Lmao of course you like his video about a 3V, you OWN one of the POS's....I'm sorry man 2V FTW

@Nick17354

Жыл бұрын

@@amateurtouring There's not that many stroker cranks made for these, and piston speed is already pretty fast on a stock stroke engine. My guess is 320-330ci, depending on the sleeves he has.

Man this video really shows how amazing the first and second Gen vipers really are..

Love how in-depth these videos are

Nice! Gives me lots of hope for my 08gt. Like you, I love the looks of my Stang.

Love thoroughly built cars like this and maximizing their potentially. Tons of respect for your driving and thought process!

@x_Star.Saber_x

Жыл бұрын

Their*

@AnthonyJ350

Жыл бұрын

@@x_Star.Saber_x Good catch!

@Four_Eyes

Жыл бұрын

thank you brew

@amateurtouring

Жыл бұрын

@@Four_Eyes what is the actual displacement of this “4.6”?

@chill_chewy

Жыл бұрын

@@amateurtouring 4.9l

You have a well put together engine with the right transmission and gear ratios, makes a big difference.

@scottyjones27

Жыл бұрын

Yes dude has to hav tough engine sounded like it was cranking out some rpms on few gear pulls mite b my cheap phone but on top b for shift was that the rpm limter working making it cut out got listen or was that valve spring limits

@amateurtouring

Жыл бұрын

Stroker motors make a big difference too. Missed that part though.. right?? 😭

@TexTheMaster

Жыл бұрын

@@amateurtouring it didnt tho when we dynod it so

@amateurtouring

Жыл бұрын

@@TexTheMaster Lol right.. so stock power 4.6 with a trans and gear swap right!????? Hahahahahaha 😂

@rastomasstanford7708

Жыл бұрын

That the sweetest set up I think. Simple dimple.

This was the best racing informative video I've ever seen 👍🏾👍🏾🔥🔥 keep it up man I wish I could build my 4.6 like this goals man

Awesome build. My favorite generation of mustang as well.

Great video, I enjoyed it. My little brother was fond of those 4.6 mustang's, he has since passed away and this brought back some smiles to my heart. I myself own a 4 eyed fox, a 1983 GT and people overlook that car all the time. She isn't the fastest but I know that car well and she comes outta the hole pretty decent and 2nd and 3rd gear using the tremec correctly have won me several red light to red light races. I surprise a bunch of kids driving rice grinders who are learning to be quick, they hate getting beat by a 60 year old guy with long hair. Lmbo. I have been building small block Fords since I was 17 and they take a licking and keep on ticking, you can wind them up all day long. Glad to see the Fomoco guys are still out there. Be safe.

@kens32052

Жыл бұрын

I had an '82 Mustang GT. It was the first year that Ford put the V8 back in the Mustang. It came with the 5.0L HO V-8. Factory 2-barrel Holley carb that produced a whopping 157hp @ 4,200 rpm and a 0-60 time of 7.5. Ah, those were the days lol.

@williamlynnminyard3rd772

Жыл бұрын

@@kens32052 we got a guy here in Town with one. But she not stock. She goes on rolls with the Lambos and vettes that crowd pier six on occasion always passing them in the oncoming lane. It's got to put a damper on their day knowing the big gapped by a stang on their way to a elite car meet. San Leon is a sleeper town.

@mauricedelarosa6940

Жыл бұрын

1983 Mustang GT, nice! I was 15 at the time and that's the car that caught my interest as a teenager wanting to go fast. They restyled the front end from the 1982 model (the first Mustang GT) and introduced a 4 barrel carburetor making 175 hp. I thought it was much better looking than the '82, and that 4 barrel carb really made a big improvement in performance. And so that's the car that piqued my interest in muscle cars. I never did own a Mustang as ultimately I became enamored with Pontiac Firebirds (I had a '74 Formula 400 in high school). But you NEVER see an '83 (or early fox Mustang GT) around anymore. I'm glad to hear that there's an old timer still racing the kids today in his vintage iron, teaching them a thing or two every now and again.

@mauricedelarosa6940

Жыл бұрын

@@kens32052 1982 Mustang GT 5.0 L H.O! Here's a little history lesson for those young uns who don't know: while it's not widely documented, there are essentially 2 muscle car eras. The original, well known era, started with the '64 GTO and it lasted 9 short years until 1972, when the smog regulations kicked in and killed all performance except for the Corvette and Trans Am. The T/A was available with a big V8 (400 or 403 cid) until 1979, then there was a painful 2 years with no real performance options (the Corvette did okay but it's price was beyond the reach of most people) until the introduction of the 1982 Ford Mustang GT, which kicked off the second (and current) muscle car era. Yes, that is correct. The second muscle car era has been going strong for 40+ years, far outlasting the original muscle car era. There has been at least one 'muscle' car available every year since 1982, and we have the 1982 Ford Mustang GT to thank for it. It had a 302 V8, but this was the first time Ford referred to this engine as a '5.0'. It had, as kens32052 mentioned, a 2 barrel carburetor and that whopping 157 horsepower (which Ford referred to as 'H.O.' for 'high output'). I realize that today, riding lawnmowers make more than 157 hp and that it's hard to believe that any car with such low output could ever be considered a 'performance' car, but you kids have to understand how horrible the cars were that were being made in the 1970's and early 80's. Believe it or not, 157 hp in 1982 in a lightweight fox platform Mustang was dealing! There was nothing else faster that year, including the Corvette, though 'fast' that year was a 16.1 second 1/4 mile. The California Highway Patrol even purchased them for high speed pursuit vehicles on Interstate 5. And for a bit more perspective, look up what Carroll Shelby was building in the 1980's. Google 'Shelby GLH-S'. Hint: it was an intercooled turbocharged Chrysler 2.2 L 4-cylinder powering a 4 door econo hatchback that looked like a knockoff of a VW Rabbit. People understandably associate Shelby with Ford, but realize that by this time Iacocca (father of the Mustang) had been fired by Henry Ford II and was now busy saving Chrysler from bankruptcy with K-cars and the original minivan and he managed to coax his old buddy Carroll over to help spice up his rather boring line of cars. Ol' Shel was even quoted at the time saying that people better get used to small turbo 4 cylinders, because the days of big V8's was gone forever. Aren't we all glad he was wrong, as only a few short years later, the new age Cobra was introduced as the Viper with the biggest high performance engine ever put into an automobile.

@andyanderson6958

Жыл бұрын

@@mauricedelarosa6940 Ford started in 63 with the galaxie and 427.

Can't wait to see the turbo kit installed! This thing will be a beast.

@bavarianbeauty-bmwe9079

2 жыл бұрын

I agree that the turbo kit will be a beast, but what do you think about a supercharger? Personally I would do a supercharger :)

@_Bran

2 жыл бұрын

@@bavarianbeauty-bmwe9079 With how much time he's put into this car he should put a turbo into it

@luisuribe5432

2 жыл бұрын

@@bavarianbeauty-bmwe9079 I think a turbo would be the best option, but I would do supercharger bc no more long tubes :(

@bavarianbeauty-bmwe9079

2 жыл бұрын

@@_Bran that is very true, good point!

@bavarianbeauty-bmwe9079

2 жыл бұрын

@@luisuribe5432 I totally agree with you on that

Your exhaust choice sounds amazing! Nicely done!

Love what you've done here. That year is one of my favorite looking Stangs.

FINALLY US 3 VALVE BOYS HAVE THE HERO WE NEED!!

@justa3v619

2 жыл бұрын

Been waiting for him to get this car back on the road lol thought he gave up or something

@Four_Eyes

2 жыл бұрын

@@justa3v619 did you see the trans install video?

@justa3v619

2 жыл бұрын

@@Four_Eyes no I’m subscribed and have the bell on. Idk how I didn’t see it. I mean I’ve seen it just now but didn’t see it before.

@thathondaguy9670

2 жыл бұрын

Hate to say it but my 5.7 challenger makes more power than his car with a tune and N/A bolt ons.

@ryanhopkins1780

2 жыл бұрын

5.7 hemi with bolt ons make 460hp I’m going say bs to that.

Feeling absolutely the same about looks of this mustang and underdog story) Also, very interesting videos, please, continue to make them

That built 4.6 Performs very well. Awesome build. I have a soft spot in my heart for the s197 3v. Nothing sounds like these cars.

i so much enjoy this video, straigh to the point, short and very entraining with no goofyiness, i like em

I wish you made more content, I love your videos. Always very informative and thorough.

If memories serve, these cars went 0-60 in 5.3-5.5 seconds bone stock. It was quicker than the previous gen. Never knew they were disliked by the Mustang community. 🤷🏻‍♂️

@Str8Ripper1776

Жыл бұрын

2 piece spark plug and cam phasers were the biggest problem

@tennnis498

Жыл бұрын

Damn straight. I already love this gen,now even more.

@justanotherfng556

Жыл бұрын

I run mine at 5.0 flat on the street. Would love to know what it gets on an actual drag strip

@ayushmalpeddi2793

Жыл бұрын

The only began to get disliked after the Coyote engine came out. Obviously it was far superior

@Bmr4life

Жыл бұрын

They were also disliked when the 2011 V6 came out and was damn near as quick

Love your channel such a great aesthetic keep it up !!

That was a cool last shot from the back of the Viper. Looked like a video game. And I’ve always loved how raw the 4.6 v8s sounded over the 5.0s. Great video!

I'm always amazed by how well-produced and edited your videos are, keep it up!

Pretty amazing how it took a Viper to bring down that Mustang build. And also pretty amazing how a 20 year old car can back up its words with action.

@spartanx169x

2 жыл бұрын

Its really not that amazing given the car. Horsepower now a days is just a function of money, nothing more, particularly for a V6 or V8. With enough money you could make a V6 produce over 800HP. Its just money, that is all.

@irvvalenzuen3135

2 жыл бұрын

@@spartanx169x captain obvious over here .. hur dur with enough money you can make anything fast . You don’t say? That wasn’t the point , those vipers are absolutely a gem and the fact that a lackluster 4.6 is gapping all these cars N/A is impressive . “Horsepower is just a function of money” yeah well isn’t everything just a function of money if you look at it that way …

@MV-ri7zu

2 жыл бұрын

@@irvvalenzuen3135 no not everything is a function of money. He is right about this tho.

@Rollincoal311

2 жыл бұрын

Cool you're a full build and you can beat a few stock cars 😂😂😂😂😂😂

@AceThaDon

Жыл бұрын

You said that like he didn’t mean mod that car all the way up lol

Nice ride brother! You did well with the build. I’ve got to say I love that Viper. Cheers🔥

You beat the hell outta my 4.6. I just started on it but it seemed special and sounds right already. That video is encouraging. Great video all around. Nice drivin'!

I love seeing how straight to the point these videos are. Awesome video man, keep it up!

Seems like you got the right combo of good parts that work together well, the driving skills to go with it, but maybe most important is how well that thing is tuned and dialed in. One of the best car videos I have seen in a long time well done man!

Finally! Video I have been looking for! Thankyou

very impressive for a 4.6 powered tank. Although the displacement isnt really stock anymore due to the stroker kit, still pretty crazy what the 3v is capable of.

Best racing video I've seen on KZread. The narration style, the specs comparison of every vehicle. The attention to detail. This is amazing. I'm subbing and showing this video to my friends. Please make more videos like this I like your content man

@simpp8

Жыл бұрын

frfr

That's a great Mustang you got there but I'm glad the Viper won. 😁

Great video man. Love Mustangs!!! Awesome build

your shifting is so satisfying !

I'm thoroughly impressed by this build man. Fantastic video as always!

WOW what a beast I was not expecting it to do that to the built 😂 can’t wait to see more!!!

@midnight347

2 жыл бұрын

I mean dude he put down 400 to the wheels in a lighter car with better gearing it isn't that hard to believe.

@ParkerTheRapper

2 жыл бұрын

@@midnight347 with the built making almost 100hp it was surprising

Great build ! Cant wait to see how its gonna go with the turbo kit!

Sick video! Crazy how a couple of performance mods can make such a big difference

Man As a 3V owner in Sacramento, the 3V community appreciates all the time and money you put into making our cars Noticeable. We are the red headed stepchild of the Mustang Community.

It's been great to see the way you've achieved the performance increases of your 3V. A balanced approach that just works. Everything is in harmony as is the case with the best builds. Man, your narration has always been excellent, but you're pro level now. Good looking guy with, smarts and articulate manner - you'd be a great addition to a network or as a company rep on a channel - in addition to your own of course!

This is a great video with even better scenery. Man it's beautiful there.

Such great content! Enjoyed every minute of it!🎉

I absolutely love your build. You’ve inspired me to follow suit on my 09 gt/cs. Keep up the great work.👍🏾

I must say, I too love the pre 2010 facelift Mustangs. One of my favorite body styles even though I’m a bow tie fan, it’s cool to see someone still trying to push the 3V. I would love to have a 09 Super Snake one day.

@hooniganruiz5613

2 жыл бұрын

Big chevy guy here and can confirm the look of the 2010 pre facelift mustangs attract me

@jeffreyelliott8912

2 жыл бұрын

@@hooniganruiz5613 ya they just need a little swap and rear suspension upgrades and there perfect

@Dukerdr

2 жыл бұрын

Nobody should ever diss a 3v motor. I fell in love with the concept when the first Honda bike engine with 3v heads came out in the late '70s. 2 exhaust valves isn't needed most of the time. ;)

@devandrasimanjuntak1646

Жыл бұрын

I always thought pre facelift GT500 is the meanest looking modern mustang to date. If I were to buy an S197 that isn’t a 07-09 GT500, I’d seriously considering front end swapping it 😮

Looking forward to seeing your next moves! Great work

MOAR CONTENT!!! Fr tho awesome video, keen to see the build progress

This NA 3v is probably my favorite of all time, even tho it took a lot of work to get it where it is, its still very impressive 👌🏼💯

What a sleeper 😮‍💨 thing is gonna move with boost

@gregagard6228

2 жыл бұрын

Ears??!! Never thought I’d see u here

@snok5944

2 жыл бұрын

deadass used to watch this guys OG gamertag videos when i bought my first 3L 💀

@EarsXBL

2 жыл бұрын

@@snok5944 lmao long time 😂

@snok5944

2 жыл бұрын

@@EarsXBL jesus man what a throwback

@gregagard6228

2 жыл бұрын

@@EarsXBL my bad I’m not subbed but I’ll go sub rn

This is impressive. Looks like some pretty skilled driving to add to the mods you've done. Nice work on the car.

Nice video!! Thanks for posting 👍

Love this mustang! Perfect color, perfectly executed asthetics! Beautiful build! Love your videos buts man I wish you put out content more frequently lol my goal is a similar build but on a 08 gt500 as you I love this body style!!

Great content as always, love to see your hard work and research coming together with real word results and not just Dyno races!! 😎👌

I love the way it sounds and it runs good

Very cool video! Good to know your mods and mods (or lack of mods) of the other cars and then watch the action.

I really appreciate that you did this out in the middle of nowhere instead of some city freeway. Nice job on the Mustang!

dude I love how your mustang screams, must be a super fun car to drive! anyways, nothing can beat a viper - the engine, the styling, the screaming...man, you just gotta love a good viper!

What a killer 4.6L man!! Nice job! 👍🏻

Awesome vid bro! Great races!!

Fourth year of you inspiring me to keep on pushing it with my 3v. Great video 🙌🏼

This was really cool! Man, those Vipers are bad ass! Love that you got that Stang running strong!

I love the 05-09 s197’s always thought they looked amazing. I’m glad you’re building one.

Thanks for putting out this video👍😍

Dood, I'm glad to see you gapping these guys!!! As a fellow Ford owner it is nice to see a 3v getting some performance love. Keep it up! Maybe you will inspire me to make a video about my 3v Adrenaline one day!

NICE job. Loved it. I grew up with my 97 cobra...when I geared it with 4.30's the car completely came alive (yes, it had other mods but the gears...man those gears!), ppl have no idea how much a gear changes things!! You got me researching these cars...I too love the underdog.

@S8ER

Жыл бұрын

Yeah I remember 4.10s and 4.30s being popular on the 4.6 cars in the 90s. The 2Vs woke up with gears for sure.. but Cobras became nasty.

@amateurtouring

Жыл бұрын

@@S8ER wake up even better with a stroker kit. You didn’t notice how he didn’t mention how big this “4.6” actually is??? 😂😂😂 go home son

An amazing showcase of power and LOVE FOR A VEHICLE. The looks of this model Mustang are really something I miss from the new more-like-a-bar-of-soap models that have been issued in recent years. Great work, photography and diversity of engine type. Subbed and eager for more...

@scottlefaux

Жыл бұрын

Wait so you like the ricer taillights on this car?

Omg, that rev at 0:40 was so crazy, it almost made my heart drop and now I'm absolutely, 110% in love with the fifth-gen stang. Period.

What a beautiful powerful sound, you got to love it!!!! I wish I was in it feeling the pull!!!

Love it! Good stuff man. Like you, I've always had a huge soft spot for the 3V and the 05-10 generation is so good looking, when done right. Prime example of a well done 3V. Looking forward to your turbo journey. 👊😎

Awesome video thanks love all the cars on this video 😊

New to your channel and I really enjoy it man. Impressive 3v I gotta hand it to ya

Love how pissed your 4.6 sounds and is. Sounds similar to my Procharged 5.7 Challenger with exhaust, but still all Mustang. Great job with the build! Been watching the progression

@eagle25311

Жыл бұрын

Challengers remind me of boats.

GREAT video. Very well done all around, and very enjoyable to watch.

Great video and races; very impressive what you have done with the 4.6!👍💯😎