Excellent information available. Good reports. Thanks for this review.🤙👍

Thank you for the info!

Thanks, i was thinking to buy one. Since i had some warranty problems on my merida. I had a w011 error for speed sensor, second time now, and they suspected i made some home made changes on the bike, which i did not. So i wanted to check it myself, to see on what ground they accuse me. I don`t know, still pricey for a tool to use once maximum twice a year.

Very good video, answers a lot of my questions, I'm thinking of buying one, and was hoping to to set the speed limit to 30kmh, but it seems not possible without som kind of St unlocker. However, maybe there is a work around that as well. Greetings från Sweden

@asono11

3 ай бұрын

Have you ever been able to set the speed to 30 without St unlocker?

Just a mention, the latest v5 of the E-Tube Project software is not compatible with the PCE-01 PC Link Device so if you are using a PCE-01 don't install v5, it won't work. v5 I am assuming is designed to work with the PCE-02. I just have the PCE-01 unit so am sticking with v4 as all I really need to do is to have the facility to reinstall firmware if I need to and to keep the firmware up to date, I can't justify buying the PCE-02 for such occasional use!

Excellent review, thank you. Just had E034 on my ep8, struggled to update firmware but finally got sorted. Some on-line say you cannot recover from a trashed firmware update and need this gizmo(or dealership) to hard wire in.... ;-)

@robertcronkite152

3 жыл бұрын

Same problem with my new DU-EP800, purchased the PCE02 but the cable ends are too large to fit the motor or the display, wtf?

@robertcronkite152

3 жыл бұрын

Apparently I need a EW-AD305 adapter to go from the old style EW-SD50 to the new, smaller EW-SD300. A short length of the EW-SD300 cable would be useful also. This took way too long to figure out.

@nigelfoulds284

3 жыл бұрын

One thing always leads to another!!!! Good luck mate...

@robertcronkite152

3 жыл бұрын

Was able to reflash with Android phone, finally. Killed all Blue Tooth pairings, put in airplane mode, only turned on the minimum and then shut it off and it restored on the first try. Back on the trails, yay!

@nigelfoulds284

3 жыл бұрын

Well done.. Certainly makes ur head buzzzzzz..... happy days :-)))

Great video just a question - can you change shifting mode from manual to Di2 with it?

Very good video. In which option do I change the size of the chainring? Thanks

If you forgot the pin and you don't have the interface what can you do?

Hi, thanks, great video! But what did you connect to? where do you plug the cable into the bike? I can't see as your arm is in the way

@EMTBVideos

Жыл бұрын

Thanks. On the back of the display there are several ports. Most likely one or two of them are just blinded with a plug. Remove a plug and insert the cable from the PCE02.

Thank you for this great video. I thought you have to open the motor and then connect the device to motor and Windows PC. But only a little cable to the bike computer i didnt know it. Is it also working for the new EP801 ???

@EMTBVideos

10 ай бұрын

Yeah, as far as I can tell, it works with the EP801. Haven't tested it myself though. bike.shimano.com/content/dam/e-tube/assets/images/contents/project/compatibillity/pdf/en/HM-CC%205.1.2-00-EN.pdf

Can you use this tool to change assistance levels on a SC-5003 display ? The display only has one port, can you connect directly to this device? (Husqvarna HC7) Tks

@EMTBVideos

Жыл бұрын

I would assume so, but I really don't know. If I interperet this pdf correctly, the SC5003 is compatible with the PCE02. Page 6 ish. bike.shimano.com/content/dam/e-tube/assets/images/contents/project/compatibillity/pdf/en/HM-CC.4.0.2-00-EN.pdf

Is it possible to change the wheel size with this app/adapter? My bike still thinks it is running on 29'', even though I swapped them to 27.5'' ... so speed and distance is incorrect all the time ...

@EMTBVideos

3 жыл бұрын

No, don't think so. Not without dealer or oem-level access. There's a few things missing when you use the app as an end user.

@denesk2794

3 жыл бұрын

@@EMTBVideos too bad ... I was thinking of setting my next bike up for mullet with the option to go 29/29 to go "touring" and mullet for "bashing"/park ... Anyway ... the difference between 27.5+ and 29 is not huge, just that my ODO has inflated mileage... not mentioning my assist cutting out a bit earlier :(

Hello. I don't know much about this subject. My question is, will I have any problems if I update my EP8 engine and other components via the E-TUBE application?

Hi Guys, Thanks for the great info.I have an SC-E5003 fitted as standard to my Merida 5000 E160, EP8 motor, can I fit and use the SC-EM800 with the SC-E5003. Does the SC-E5003 connect to the motor wirelessly or does it need a wire connection? How would I configure the system to work with the SC-E5003? Any help would be great.

@EMTBVideos

2 жыл бұрын

Hi. Not sure I understand. The SC-EM800 will work with the EP8. Both displays connect by wire. Most likely the existing cable will work for the EM800. I believe the SC-E5003 is using the new cable. If I'm mistaken, there are adapters available to make the EM800 work. I've never tried connecting two displays simultaneously, if that's what your considering. I wanna say it won't work, but who knows (:

Hi. Can one change from mechanical to Di2 shifting using this device and the corresponding software?

@EMTBVideos

2 жыл бұрын

I haven't got a bike to connect it to atm. But, yes, I believe the PCE02 will do that. I didn't look into the Di2 settings when I made this video.

Crucial question Is it possible to delete error logs with it?

2 år senere enn du la ut denne og EP-801-RS 2023 motoren skaper problemer, og nekter BT. Hvor fikk du tak i denne enheten fra? Ser at de koster en nyre på nett..

Hello with PCE02 do you able activate light socket ?

@EMTBVideos

6 ай бұрын

It's been a while since I had a look at this. But as far as I can remember, it can be used to activate the light port.

When you say “we connect one end to the bike” where exactly do you connect it to?

@EMTBVideos

2 жыл бұрын

Just an available port at the back of the display. Depending on what motor and display you've got, the PC02 plug might not fit without an adapter from old to new type plug.

@PedalBikerUK

2 жыл бұрын

@@EMTBVideos Thank you for your reply but God, no surely they haven’t changed the connection. I’ve now sourced a PCE1 to try and I have an SC-6100 head unit, I hope it fits or I’m stuffed.

@EMTBVideos

2 жыл бұрын

@@PedalBikerUK Never used the 6100, but I believe that display predates the EP8-motor. So I guess it'll fit.

@PedalBikerUK

2 жыл бұрын

@@EMTBVideos Yes, I believe the E6100 motor came out before the EP8. I’ll find out soon enough whether it works, if I remember I’ll let you and your viewers know.

@PedalBikerUK

2 жыл бұрын

Short update, the PCE1 had 2 cables and one of them fitted the SC-6100 head unit fine. The firmware rewrite went perfectly smoothly and there is no way I would try to do this again with the Wireless/Bluetooth option on a mobile phone again. The wired option was just so much more reliable, faster and simpler, just a shame that the black box to do it doesn’t come cheap.

Hello sir, have you power up your bike after plug the câble ? Or it is not necessary ? Thanks

@EMTBVideos

Жыл бұрын

The bike has to be switched on, and I believe I connected it before turning on the bike.

@fredericgiraud3116

Жыл бұрын

@@EMTBVideos i received today pce02 system and it wasn't necessary to switch on the bike. Fortunally i was able to repear à defect firmware update .

@EMTBVideos

Жыл бұрын

Never tested this myself, but it's nice it can be used to fix a failed update!

Hello, I have an SC-EN600 display.. can you tell me which port the interface is connected to?

@EMTBVideos

6 ай бұрын

It should work with any available port.

I am very curious, Shimano is replacing my EP8 as the one way sprague was starting to pile up, and the dealer is telling me that this box is needed to program the new motor. Is that legit? I feel they are trying to get one over on me. Or do I just pay the $100.00? Thanks!

@EMTBVideos

2 жыл бұрын

This sounds strange to me. Is this a Shimano Steps shop? Every Shimano Service Center should have this tool, and they need a higher level of access. The end user haven't got access to all the functionality. OEM level access is needed to set the motor angle. That could be done before the motor is shipped though, I guess.

@kerianhalcon3557

2 жыл бұрын

@@EMTBVideos Sorry I may not have been clear, yes they have the tool, and are going to charge me $100.00 CND for them to be able to set up the motor. Or if they could get a tool to sell they would sell the tool to me. Either way, seems like I am getting hosed. Apparently Shimano is giving them, and therefore me a totally virgin motor.

How to connect Shimano SM PCE-02 to Giant Revolt E+ PRO bike, DI2, Shimano motor. I don't know if he can connect to the cable. And if somehow it can be connected, can the region be changed for a higher speed of 32 km/h? Who knows? thanks for the answers.

@EMTBVideos

Жыл бұрын

The region settings can not be altered in PCE-02, at least not with the basic user. I guess it's possible with the OEM level access, which almost no one has.

Hi have new di2 12s and can't update shifters wireless to v4. 03..sats need wire. Is this it?

@EMTBVideos

2 жыл бұрын

I would assume so. I don't know of any other hardware for the Shimano steps+di2. There is a PCE01 too that might work, but it's not produced any more afaik.

@keiranmarley4052

Жыл бұрын

1 year late but still going to reply in case it helps someone else. For the "new" 12s Di2, you'll need V5 of the software and you'll need the SM-PCE02 hardware.

Is this the only way to activate a front headlight on a Shimano e8 motor?

@EMTBVideos

Жыл бұрын

Yeah, as far as I know. Unless the STUnlocker app will do it?

@JEFFREYSOLORIO

Жыл бұрын

@@EMTBVideos I can confirm that you cannot do this through the Shimano E-Tube app. This can only be done using this device which is extremely expensive. But if you take it to a Shimano certified dealer in my case they did it for $30

Hi, at 1:39 in your video you can select up to 85NM. I have the EP6 and can only select up to 50NM. Anyone know how to help?

@EMTBVideos

Ай бұрын

Hi, not sure what's going on. The EP6 should offer 85 Nm too. But I guess it could be limited to 50 Nm in the ECO setting...

Congratulations! Great job! One question? Can I turn up the velocity limit to 30 or 35 km/h with this SM PCE 02 ?? Thank you .

@EMTBVideos

3 жыл бұрын

No, at least not with the regular user access.

@laurC89

2 жыл бұрын

You can do that with st unlocker. It's easy

@daximusp6967

2 жыл бұрын

@@laurC89 hi, what is st unlocker?

@laurC89

2 жыл бұрын

@@daximusp6967 an app wich can help u delimit shimano e8000

@daximusp6967

2 жыл бұрын

@@laurC89 Okay, well i got the steps 6000, can it be done on this as well.?

Can I plug the sm pce02 with dura-ace di2 9200

@EMTBVideos

2 жыл бұрын

Yeah, I believe so. I haven't tested myself, but here's what Shimano has to say. "SHIMANO's SM-PCE02 PC Linkage Device for STEPS and DI2 groups is used to check system functions, connections, and errors as well as update firmware and customize functions." bike.shimano.com/en-EU/product/component/city---trekking-e-bike-e6100-series/SM-PCE02.html

@digitalexposure1927

2 жыл бұрын

@@EMTBVideos Thanks for the reply

can u switch the speed mode to 45 in there? i saw speed limit 25kmh...

@EMTBVideos

Жыл бұрын

It's not possible with the end user level of access. I guess it’s possible with an OEM user.

@teabagNBG

Жыл бұрын

@@EMTBVideos thx, I work at a bike shop… how can I get oem access?

@EMTBVideos

Жыл бұрын

​@@teabagNBG That I don't know. Where I live, the distributor, Shimano Nordic has got it. I guess you'd need to talk to whoever handles Shimano where you live.

Hello does it work for the e6000 series?

@EMTBVideos

9 ай бұрын

I never tested, but I believe it does.

Please help - Have you solved the problem with E014 error - how to delete the logs - can it be done with this cable? it seems that buying this cable does not offer much more than the E-tube blueatooth connection Please help with E014 - local service cannot do this and wants to send the bike to the manufacturer

@leszekkozlowski2651

Күн бұрын

Did you manage to solve the E014 problem? please help

Wait you cant change region ?

Hey, thanks for the infos about the PCE02. Nice video ! I got an E014 error on my bike that i cant get rid off, do you think this piece of hardware could help ? I thought on firmware up/downgrade Is there a way to do a firmware overwrite even when its in error state and there is no newer firmw. version available ? DU-E5000 Motor E6100 Display

@jamiegrayson3739

2 жыл бұрын

Hi there, I have the same problem - did you resolve it?

@amaninaroom8678

2 жыл бұрын

@@jamiegrayson3739 Hi Jamie, i had to go to a bike shop with it. Users dont get access to many motor values, even with the Adapter. The Shop here in town couldnt reset it by thereself. They send the motor to Shimano so they can reset. But for real, i think there is a way to reset. But they keep it very secret. How do you get it ? Using a dongle or manipulate magnet position. I have an dongle here now ,but im afraid of using it now.

@amaninaroom8678

2 жыл бұрын

@@jamiegrayson3739 I was lucky....First I lied and sayd im not manipulate anything cause of warranty. But they saw it in the motor data Log. Unfortanetly I dont have to pay for Shimanos work to reset it. I read that they replace Motors with e014 too. But mine wasnt replaced, they reset it and i Just payed Money for work at the shop. So for real i think they dont even send it to Shimano, but thats Just a theory. I payed round 150 €.

@amaninaroom8678

2 жыл бұрын

@@jamiegrayson3739 the motor replacing Thing could be a scam from some Dealers i think.

@amaninaroom8678

2 жыл бұрын

@@jamiegrayson3739 gl for you

Is it possible to remove e014 error code?

@leszekkozlowski2651

Күн бұрын

Did you manage to solve the E014 problem? please help

What is this bike?

@EMTBVideos

2 жыл бұрын

The bike in this video is the 2020 Merida eOne-Sixty 5000

Does the bike have to be turned on for this to work? My ep8 botched an update and now it will not turn on longer than 4 seconds then turns back off. The app can’t connect long enough to force an update.

@EMTBVideos

Жыл бұрын

@Frederic Giraud wrote about this in another comment. He just tested this and said it worked.

@mcvd02

7 ай бұрын

Did you get this fixed? I just used app to update and failed. Now doing this same thing.

@mcbikewild9243

7 ай бұрын

It fixed it once I plugged it in and redownloaded the old software from shimanos site. Still going strong. Just not going to connect to the app anymore. Really no need to if it works perfect every time.