Checking out the new E-Tube app for the 2021 SHimano EP8 motor. #Shimano #Etube #emtb
Жүктеу.....
Пікірлер: 29
@urastus92023 жыл бұрын
Thanks again. Still appreciating your unbiased reviews.
@dawn-moon3 жыл бұрын
It would be nice to be able to rename the modes. Like one profile for DRY, the other for WET :)
@spanierjuan Жыл бұрын
Great Idea for the Quick button for the settings.... @shimano
@martinschwartz73423 жыл бұрын
Thank you for another well made and very informative video. How do you compare the 2021 Shimano EP8 with the 2020 Yamaha PW-X2?
@pey3212 жыл бұрын
this was more helpful than the instructions
@thecount10013 жыл бұрын
hopefully, Shimano pays attention to you and takes your advice.
@aleszverca2 жыл бұрын
Hey, wich setting would mostly affect battery consumption...the torque or the assist character?
@CreamyBone5 ай бұрын
It would really be nice if Shimano would offer micro tune functionality in a firmware upgrade for the older E7000, E8000 and EP800 😉
@johnrobb32752 жыл бұрын
.........Have you figured out what the small dots mark (in "Assist customize" mode)?
@chrish88712 жыл бұрын
My orbea rise only connects up to 15 seconds after switch on, as the documentation. Not tried beyond that but I guess they don’t want you fiddling with that while riding
@arielmaman57963 жыл бұрын
I have a Merida eONE-SIXTY 900 bike, every time I try to connect it writes to me like this. What should I do ?
@trickyrickymtb56223 жыл бұрын
Anyone know how to switch profiles on the EW-AN junctionA setup on the Rise?
@albertfranqui35983 жыл бұрын
Time blevo makes an app for shimano
@explosivegaming52213 жыл бұрын
Very helpful video, I’m trying to derestrict the EP8 motor so that it can go past the 25kmh restriction, do you know how?
@mtbmike9866
3 жыл бұрын
Stunlocker
@Cartsp70
5 ай бұрын
It’s impossible because it’s preset to Uk 15 mph you can’t overtake it so waste of time
@pedromonteiro46979 ай бұрын
Can I create a profile 3, for one more assistance customization?
@EMTBVideos
9 ай бұрын
Afaik, you can only set 2 profiles on the original ep8. There are 2 profiles on the new EP8 (EP801) and the EP6 also. But you can add multiple presets under each profile. See the part about Fine Tune Mode www.emtbforums.com/ams/we-rode-the-new-shimano-ep6-and-ep8-801-ebike-motors.49/
@S14AA10 ай бұрын
Need be able to change country to somewhere with higher speed limit like NZ
@EMTBVideos
10 ай бұрын
That's not possible with this tool using the basic level of access. I assume it's possible if you've got OEM access, which is a higher level than what most shops have.
@jonatanmanrique78873 жыл бұрын
Hola tú tienes idea cómo recuperar la contraseña para ingresar a una Ebike
@homanyousofi3104Ай бұрын
Would this work for the EP6 rs motor too?
@EMTBVideos
Ай бұрын
Yeah, I believe it will work.
@zt11slap3 жыл бұрын
I can't connect, I get an error all the time
@Gemini899Bf2 жыл бұрын
This application is a joke, my new focus 7.9 dont work anymore i did a firmware update and after 63% the bike turn off and now it does not start. 7000€ bike with 30km its now broke
@alphaphotography97673 жыл бұрын
I have the E5000 Display and it doesn't work? Need help.
@EMTBVideos
3 жыл бұрын
I tried searching, and could only find this page/video in Norwegian. Perhaps the video can be of some help. This is for E-Ride, but I guess it should be the same for E-Tube. www.shimano-steps.com/e-bikes/norway/no/news/E-BIKE-HOW-TO-E-TUBE
@alphaphotography9767
3 жыл бұрын
@@EMTBVideos I have the Shimano SC-E5000 display. With the Husqvarna MC5 2021 When I turn on the bike I find no Bluetooth signal in the E Tube app. Maybe the display does not have Bluetooth but in the manual it says that it works. Just not explained. Can you help me? I do not have an E5000 bike but a display.
@guzforce2 жыл бұрын
way to complicated and unpractical... great video!
Пікірлер: 29
Thanks again. Still appreciating your unbiased reviews.
It would be nice to be able to rename the modes. Like one profile for DRY, the other for WET :)
Great Idea for the Quick button for the settings.... @shimano
Thank you for another well made and very informative video. How do you compare the 2021 Shimano EP8 with the 2020 Yamaha PW-X2?
this was more helpful than the instructions
hopefully, Shimano pays attention to you and takes your advice.
Hey, wich setting would mostly affect battery consumption...the torque or the assist character?
It would really be nice if Shimano would offer micro tune functionality in a firmware upgrade for the older E7000, E8000 and EP800 😉
.........Have you figured out what the small dots mark (in "Assist customize" mode)?
My orbea rise only connects up to 15 seconds after switch on, as the documentation. Not tried beyond that but I guess they don’t want you fiddling with that while riding
I have a Merida eONE-SIXTY 900 bike, every time I try to connect it writes to me like this. What should I do ?
Anyone know how to switch profiles on the EW-AN junctionA setup on the Rise?
Time blevo makes an app for shimano
Very helpful video, I’m trying to derestrict the EP8 motor so that it can go past the 25kmh restriction, do you know how?
@mtbmike9866
3 жыл бұрын
Stunlocker
@Cartsp70
5 ай бұрын
It’s impossible because it’s preset to Uk 15 mph you can’t overtake it so waste of time
Can I create a profile 3, for one more assistance customization?
@EMTBVideos
9 ай бұрын
Afaik, you can only set 2 profiles on the original ep8. There are 2 profiles on the new EP8 (EP801) and the EP6 also. But you can add multiple presets under each profile. See the part about Fine Tune Mode www.emtbforums.com/ams/we-rode-the-new-shimano-ep6-and-ep8-801-ebike-motors.49/
Need be able to change country to somewhere with higher speed limit like NZ
@EMTBVideos
10 ай бұрын
That's not possible with this tool using the basic level of access. I assume it's possible if you've got OEM access, which is a higher level than what most shops have.
Hola tú tienes idea cómo recuperar la contraseña para ingresar a una Ebike
Would this work for the EP6 rs motor too?
@EMTBVideos
Ай бұрын
Yeah, I believe it will work.
I can't connect, I get an error all the time
This application is a joke, my new focus 7.9 dont work anymore i did a firmware update and after 63% the bike turn off and now it does not start. 7000€ bike with 30km its now broke
I have the E5000 Display and it doesn't work? Need help.
@EMTBVideos
3 жыл бұрын
I tried searching, and could only find this page/video in Norwegian. Perhaps the video can be of some help. This is for E-Ride, but I guess it should be the same for E-Tube. www.shimano-steps.com/e-bikes/norway/no/news/E-BIKE-HOW-TO-E-TUBE
@alphaphotography9767
3 жыл бұрын
@@EMTBVideos I have the Shimano SC-E5000 display. With the Husqvarna MC5 2021 When I turn on the bike I find no Bluetooth signal in the E Tube app. Maybe the display does not have Bluetooth but in the manual it says that it works. Just not explained. Can you help me? I do not have an E5000 bike but a display.
way to complicated and unpractical... great video!