It's ironic that it's called "Lucky65" and features a four-leaf clover on the bottom... but there's no green colorway

@Keybored

2 ай бұрын

Haha that's a great catch!

@leftcoastfunk

2 ай бұрын

it's probably the only colorway I'd even consider, but tbh this board is a "pass" for me anyway

@24kmetal99

2 ай бұрын

Green is not a lucky color to the Chinese, that's why you'll never see a Chinese guy wearing a green hat. LOL

@sentimentalhermit

2 ай бұрын

@@24kmetal99 Oh, interesting. Searching for green+lucky+color+China gives conflicting results. Some websites say green is a symbol of wealth, while others mention the color is associated with infidelity (esp wrt green hats)

@ivnbruh8348

Ай бұрын

@@24kmetal99haha 戴綠帽

I don't think not having screw-in stabilizer is that big of a deal. Plate-mount stabilizer works well enough for a beginner board, especially at $79, and I don't think most people can even tell the difference between screw-in and plate-mount unless they're really deep into the hobby. This is a beginner board, and it looks like it's providing tremendous value for people who just want to get into the hobby.

@Keybored

2 ай бұрын

Thanks for the feedback!

@Sylveighty

Ай бұрын

There's a couple of really good platemounts nowadays, TX AP platemounts are so much more convenient to tune compared to the pcb mount ones because of how easy it is to uninstall them (then again you dont need to do much to make tx aps work anyway) and Designer Studio plate mounts as well.

Always appreciate your reviews and videos, thanks!!

It's beautiful and certainly better than a budget plastic. Sounds nice too without any rattling or pinging. Thank you for info.

Lol loved the sketch at the start

@Keybored

2 ай бұрын

Glad you enjoyed it!

Great review. Thanks a lot. Hilarious but also very informative.

@Keybored

2 ай бұрын

Haha thanks! I appreciate it!

Budget boards are just killing it these days. I've only been sort of into the whole scene for a little over a year now, but prices have come way down since then. Hell, you can even find ultra budget boards that are hot swap, have modding potential, etc and they're cheaper than some of the "name brand" membrane boards....It allows people to at least get their feet wet in the hobby and get deeper into as their budget permits. At one point, you really couldn't get started for under $100, but now, you can get started for under $50 (sometimes way under).

@Keybored

2 ай бұрын

Absolutely! Great time to enter this hobby!

@mr.guillotine3766

2 ай бұрын

@@Keybored I just have a cheap little $30 board I got from Amazon, and it's got Optical switches in it, but at least their Gateron Blacks, so there are other options out there, or I can make some Franken Switches just using the bottoms of these and almost anything else, or a spring swap...plenty of modding options, there are quite a few fairly affordable 60% cases if I wanted that isn't plastic, or just better plastic...and it can all be done in stages really. I could do the switches/springs first, some new keycaps after, then eventually a new case. I've already added a little more foam (it came with some, which surprised me tbh), added a little foam to the space bar since it was very hollow sounding. The stabs were actually pretty decent, but I'm sure I could tune them a bit, make sure they're straight, do a bandaid mod, a little more lube, etc I do wish there were more videos on this sort of thing, where someone takes a relatively cheap hot swap board and then really just goes hardcore on the modding showing how it can end up sounding with each step, keeping track of the rough dollar amount, then maybe compare it to something in the same general price range to see if you can get close by just improving it as your budget permits. Anyway, this is a long rambling reply lol. Hope all is going well :)

YESS NEW KEYBORED VIDEO

The stabs that come with it are the Xinmeng V2 that’s been coming with the all the Xinmeng M71 rebrands (Yunzii AL71, Womier SK71 etc) and I have to say they are surprisingly good!

I liked the color of the case and how it was changing in different light angles. 🙂

Neo 65 will forever be my favorite "$79" keeb. (It sounds soo sharp and "clacky" with hmx xinahi)

Just to clarify, the Lucky 65 brand ( Weikav ) offers different arranged PC plates, even including a plate version of FR4, so it also allows users to experience different arrangements. ( Plate-mounted stabilizers are not as efficient, or convenient as Clip-in stabilizers, so I think its actually an extra selling point of Lucky 65 )

I feel like his opening skits are usually inspired by his favourite meme at the moment

In my country, this keyboard is on GB for 35 dollars (shipped). It is an absolute killer.

i feel like with these intros, we are just watching keybored go slowly more and more clinically insane

Banger? I hardly know her!

@Keybored

2 ай бұрын

Hahaha

keyboard GOAT is back ✊✊✊

I think most beginners don’t even consider plateless build. And plate mount stabs are very good nowadays to the point it makes almost no difference with screw-in stabs.

Honestly I’d be more disappointed by proprietary software (no VIA/VIAL support) than the plate mount stabs, but both are definitely disappointing at any price point these days. I just can’t imagine a world where the price differential between plate and PCB mount clip-ins is meaningful enough for that sacrifice.

@Keybored

2 ай бұрын

I actually have another keyboard on the way and at least on paper, this thing seems like a crazy banger of a deal... Stay tuned!

@ImOnMy116

2 ай бұрын

@@Keybored always stoked for more content from you Scott!! Appreciate you calling things out for what they are!

@Billy_The_Frog

2 ай бұрын

i was just relubing the plate mount stabs on my keyboard and was thinking how convenient it was to remove and lube them without needing to take apart the keyboard, unlike screw in stabs. So i think plate mount stabs have their own advantages.

@icedburger

2 ай бұрын

@@Keybored When will that be and will it be under 100usd? Im tryna find smth for a gift but i only have a few days to decide

TX has plate mounted stabs and they are very good.

Design wise it looks like a Rainy 65

@Keybored

2 ай бұрын

Kind of does doesn't it?

If this was my first custom keyboard (and at this price?!) I would have very little to complain about. There are 'ok' plate stabs you can mod these days. If this was a $200 keyboard, then I guess it becomes a little more contentious one could argue. Awesome video and humour as always 😀

@TwilightTypingASMR

Ай бұрын

Which would you recommend at a $200? Thanks in advance.

@lazyreuvin

Ай бұрын

@@TwilightTypingASMR I'm no pro, but personally I like modding my keyboards to my hearts content so I find boards like the Tofu60 great cause I'm not locked down to proprietary PCB's or have any extra switches on the side etc. If I could start over from the beginning I would probably look at picking up a Wooting as a base cause I'm interested in their technology and then take my time switching the case, modding the stabs and switches etc. Optimum (@optimumtech) has some great videos doing the exact same thing. =)

You should review the Xinmeng M67 next, its another affordable knobless 65% Aluminum Keyboard under $100, it's $70 (when converted) here in Shopee Philippines

I mean.. if the pcb support screw in, plates option, non flex cut, and one more battery on the other side for balance. Other thing, green color, It would be great.

The skits are back. All is well in the world.

@PAPA_CEO_PUMA

2 ай бұрын

Hope you’re feeling better, Scott :)

인트로 맛집! best👍 perfect 🎉

@toketasatou0402

2 ай бұрын

앗 여우비온님 발견👀 럭키65 구매해보실건가용?

Can you do a review of Gateron Smoothie switches?

PBT keycaps will always sound good.

plate mount stabs are fine for a $79 keyboard, I wouldn't expect more. For that price half the time you get a tray mount with soldered switches and a steel plate lol The bigger problem is the proprietary software. Velocifire has a long history of putting out cheap pre-built keyboards so maybe their software is okay, i don't know

Hipyo tech reference hipyo tech reference 😂

There's no way layouts is the reason for the stabs when Keebio's boards have literally the most layout support of any board being made right now, and the only layout sacrifice they make is ISO users have to contact ahead of time to get the hotswap socket rotated yes they support ISO, in addition to ANSI (obviously), split L and R shift, split spacebar (1.25/2.25//2.75u, 2.25/1.25//2.75u, 1.25/1/1.25//1/1.25u), regular 6.25u moogle or 7u tsangan as well with matching bottom row mods, split backspace, 2-column L macro column, top left or right knob (or both or neither), stepped caps, 2x 1.25 vs. 3x 1u bottom right And that's all just for their 75% layouts let alone the multiple ortho, 40, 60/65, 70/75, 80 They also have

@Keybored

2 ай бұрын

Hope they can drill some holes!

I would consider it if they didn't get rid off volume knob. It's previous version (sugar65) had knob..

That's not a downside at all. Plate mount stabs can be just as good as screw ins when tuned correctly. it's also much easier to live with because I can take them out without disassembling the entire board.

@24kmetal99

2 ай бұрын

I don't know why plate mounted stabs is a downside when he said it himself: It sounds good. I'd expect someone to say that when it sounds terrible with plate mount, but this board already sound good, so what exactly is the problem? lol

@retardmoguss

2 ай бұрын

@@24kmetal99 the problem is the lack of option to begin with, people who would want to use certain pcb stabs don't even have the option to begin with.

In Vietnam, it's just 35 USD, sometimes less if you get discount vouchers :D

@who_using_my_acc

3 күн бұрын

Same here in ph

Considering most people buying a board at this price WILL use the included stabs, it being plate mounted is a non issue to me. Proprietary software is very common considering it has 2.4gh wireless and not just Bluetooth.

@Keybored

2 ай бұрын

Thanks for the feedback!

nah bro the intro made me sub to you 😂😂

@Keybored

2 ай бұрын

Hahaha thanks for the sub!

My spacebar is hanging up and does not return to the resting position. Open to suggestions. I've already attempted to reverse the spacebar and I've installed different switches. Should I be look to trim the stabilizer mounts, or inspect and re-lube? What's strange is the spacebar works perfectly fine when I flip the keyboard upside down and the typing surface faces the desktop surface.

I'll share some facts about this keyboard as not everyone may be aware of. I ordered 2 units. 1st unit didn't want to connect 2.4gHz and keys didn't want to change in software. In the 2nd it works, however! 2.4.gHz is completely useless as it's not responsive and has massive delay! Not for gamers then! And the total red flag for me is you can't change the FN key layout in the software. Yes it's beautiful keyboard that feels and looks premium, but I have to take aways few points for not being practical.

I’m thinking about buying the Nuphy Halo75 v2 that is coming next month… and it has exactly the same “problem”… plate mounted stabilizers… 🤦🏻‍♂️ oh well, I guess you can’t have it all if you go on a budget…

@Keybored

2 ай бұрын

There is another keyboard that is heading my way that may actually be the GOAT entry... Stay tuned!

Hey can you change FN key in the software?

Thank goodness you finally given up on the middle part hair 😭

Dude I've got a problem. It came today and I installed their software but I can't can't change the mapping of certain keys. Most of the keys don't want to be changed in their app while others do. I can't change FN to be alt or alt to be FN but also I can't change most of normal keys. Any suggestions?

Do you have a suggestion for best budget barebones keyboard? hopefully pre-built as well. I just straight up wanna put my switches and keycaps. Thanks!

@m.jackson7718

10 күн бұрын

Lucky 65, Rainy 75, INFI100 ( this is abt 125 $)

For me the lack of QMK or at the least VIA/VIAL kinda seals the deal. When you run Linux, having a driver means a 10GB VM running an unlicensed Windows with USB passthrough, and an extra keyboard for using during the process. Group Buys are kind of a sad thing for me as well because I've usually missed out.

@Keybored

2 ай бұрын

I wish they made this an instock!

인트로를 보며 역시 유튜버의 길은 쉽지 않음을 깨닫게 됩니다

@Keybored

2 ай бұрын

ㅎㅎㅎ 그렇니까요. 시청자들을 위해서 ㅋㅋ

I am just here for the memes

bro!! not that intro!!! 🤣🤣🤣

@Keybored

2 ай бұрын

Ugh brotha ugh!

Oh my gosh! I cried. That was soooo funny! 😂 Hilarious. Absolutely needed that laugh!

@Keybored

2 ай бұрын

Haha glad it was funny! Have a good one

Hello, nice review ;) I've bought this keeb first impression was great but I am facing a major flaw that there is no way to configure right alt key with the software, I was able to put in the Sugar65 the right alt in the original FN place and the FN key in the Right Ctrl in the sugar with his software, but it seems that in this keyboard with it's own software is imposible, I configure the keys in the soft as I have in the Sugar65 and save and nothing happens... Somebody with the same problem?

how was the sound building it with no foams?

@Keybored

2 ай бұрын

It sounds thinner

Hey scott can you make the lucky 65 clacky?

Don't you think that you can swap out the PCB for another PCB that supports screw in stabs? I myself was looking for a budget aluminum kit all week and was quite dissappointed when you said it was plate mounted stabs. Regards, Gandalf

@GandalfWhite-gt9wy

2 ай бұрын

If you can't, do you have any recommendations on an aluminum custom board around 100 dollars?

Don't you think it's available to swap out the pcb for another pcb that supports screw in stabs? Since I was fairly dissappointed when you said it had screw ins. I was looking for an alu budget DIY kit all week!

@m.jackson7718

10 күн бұрын

Just to clarify, the Lucky 65 brand ( Weikav ) offers different arranged PC plates, even including a plate version of FR4, so it also allows users to experience different arrangements. ( Plate-mounted stabilizers are not as efficient, or convenient as Clip-in stabilizers, so I think its actually an extra selling point of Lucky 65 )

The intro is too funny🤣🤣🤣

@Keybored

2 ай бұрын

Haha glad you liked it!

Why do so many of these boards, especially in the budget range, use proprietary software? instead of QMK/VIA support. Is there a higher cost for adding that support? What is required for it? Is it chip based? Does it require licensing fees? These are all interesting things that would be cool to make a video about.

What are the benefits that screw-in stabs offer that plate-mounteds don’t?

I wonder if putting some milky yellows on this will make it thock...

in total I ordered 6 units of blue one. Of 6 units only one was unfaulty. 1 came scratched, 1 came without support rubber on the bottom, 1 came without rgb on capslock and delete key, and other 2 came without working software - couldn't change key layout. Half of them all didn't have working 2.4gHz connection. In one unit after replacing the spacebar stabilizer the whole keyboard stopped working.. It looks so good but the quality is such a distaster that's it's hard to recommend.

Is good but I need the f row

If anything the proprietary software is the major issue here. Who cares about clip-in stabs, if I have the option I always go with clip-ins anyway.

@GirlPlus

2 ай бұрын

Cherry Clip-Ins w/ a proper tuning, lubing(, and every once in a blue moon Band-Aid Modding) area actually insanely good these days (And ofc Durock Clip-Ins are pretty up there too), Like I think more than not it comes down to a tuning problem with bad stabs compared to them being plate mounted. Now if the convo is about how clip-ins change the sound, arguments can be made there but its still whatever. Out of all my boards 3 have pcb and 2 have plate... Both of the ones with plate mount came in perfect with no work AT ALL needing to be done on them (aside from throwing some extra Krytox in the housings after a good amount of time)

@fashionweek0

2 ай бұрын

Agreed

@Keybored

2 ай бұрын

Not so much that it's plate mounted, but that the option could have easily been put there. A lot of these boards are an entry way for people to explore and it would have been great if that was available for someone to try new things, screw things up, learn, etc.

@GirlPlus

2 ай бұрын

@Keybored tbh I do agree with that. Maybe it was an issue designing a plate that accommodates both -- but even then, they sell extra plates w/ split space for ANSI/ISO so it wouldn't be too much.

@iDeker

2 ай бұрын

What’s wrong with the software? It does everything u should need really

I have seen some amazingly cool super budget keyboards online. But the moment they come with plate mount stabs but no option for screw in, I don’t even consider buying it. The custom space relishes having tuned and non ticky stabs. You can make plate mount stabs work well too but there is much more factors that could cause tick in plate mount

Hi! I am deciding wether to get this barebone or buy a 2nd hand KBD D65 (Aluminun top & has brass plates) which one should I get? They r both 79 usd.

@ishanparikh5587

Ай бұрын

I would say this one might be a bit better. I have a D65, it’s quite good, but the configuration kitting isn’t as extensive as what the lucky65 offers from what I can tell. The d65 imo also has a very stiff typing experience. The lucky65 seems more likely to not have that. I would say given the additional kitting on the lucky65 u might get more value from the lucky65

@_seoldam

Ай бұрын

@@ishanparikh5587 thank u bro

@ambasing69

Ай бұрын

Lucky 65 is cheaper if you buy from China, it’s like $50 or less here

bruh the peak acting

Does it need a force break mod?

I got 1 lucky65 but the pcb don't support stepped caplocks

@m.jackson7718

10 күн бұрын

did you get buy an extra plate which supports stepped caplocks from Weikav (keyboard brand)????

btw I believe the skit has happened in real life many times.

Damn... The intro really made me look into myself. Nevermind, I just got reminded while typing this comment, that I never go outside + I'm scared of women

@Keybored

2 ай бұрын

Hahaha

Oof plate mount only

0:20. Oh so that sound was originally from this video

@Keybored

2 ай бұрын

Haha it's actually from another meme

c'mon! give us plate mounted stabs

@m.jackson7718

10 күн бұрын

The Brand Weikav is a Chinese brand, and in China, Plate mounted stabs are no mainstream. pms are not as convenient as the clip-ins, and bh its just a useless design... (clip -in designs including brands made Rainy 75, INFI 100 etc...).

LOL i like the sketch that was something else

@Keybored

2 ай бұрын

Haha glad you liked it!

How do you change the weights?

@Keybored

2 ай бұрын

Oh it's just one type!

Heres the thing: It’s only $50 or less on chinese retailers

Yeahhhh plate mount stabs are a deal breaker for me on any keyboard. never again….

@Keybored

2 ай бұрын

For me, it's not the stabs but the inability to change them to something else to explore options

@zachw3347

2 ай бұрын

@@Keybored The inability to explore other stab options is what you mean if I understand correctly? I can understand wanting to try new stabs but for me personally stabs are such a pain that I just like to tune mine to perfection and never change or worry about them again. No matter how hard I tried and all the mods I did I could never get plate mount stabs to that point.

i really want to get it but the idea of a gb budget keyboard is weird honestly

As a newcomer, yes you are expecting too much from an 80 dollar keyboard and its definitely not a dealbreaker. However, if i were in your shoes, i would probably be annoyed by this aswell. From the perspective of the company, having a cheap good product is great, as long as the product isnt perfect and there still is the urge to upgrade to something more high end, hopefully from the same company, right?

How do you think this compares to the Womier S-K71 as an entry to the keyboard world? I am trying to get my brother-in-law into the hobby.

@Plaqueboycutie

2 ай бұрын

I love womier. Both are good, i think womier might have better software. I would prefer the lucky as i like the overall design and what comes with it

@law2xoliver

2 ай бұрын

The SK71 is more akin to the Xinmeng M71. But you can check out the Womier SK65, basically the Lucky65 with knob (same OEM). will come out at around the same time as the Lucky65. Personally, if you're on a tight budget and as long as you can live with the compromises on a budget board, the Lucky65 is not bad. It's more like an upgraded Sugar65 but not on the likes of the Neo65 level. IMO, i would get the Luminkey65 if you have the budget, while it's still on stock.

Is that what he said? 🤔

@user-dx1by9rm1b

2 ай бұрын

That is in fact what he said

great intro

@Keybored

2 ай бұрын

Haha glad you enjoyed it!

This keyboard is only 40 dollar in VN 😂

wait...it can use stepped caplock

@joshuadelsaraza4782

Ай бұрын

Hate to break it to you, but my unit doesn't come with another socket for that stepped capslock. So Ig it depends on whether u'll have one or not.

@m.jackson7718

10 күн бұрын

@@joshuadelsaraza4782 Just to clarify, the Lucky 65 brand ( Weikav ) offers different arranged PC plates, even including a plate version of FR4.

@joshuadelsaraza4782

10 күн бұрын

@@m.jackson7718 I'm in fact currently using an fr4 plate in mine, it feels better and sounds better for a foamless clack build. Edit: My 1 month old comment was before the fr4 plate got released

Ugh brother ugh

@Keybored

2 ай бұрын

What's that brotha!?

Luck-Y 65. Rain-Y 75. Back plate weight with 4 leaf clover carved in. Back plate weight with cloud carved in. Same basic case design... 🤔 This isn’t the same company? If I didn’t know better I’d say someone’s trying to capitalize off someone else’s hype and hopefully confuse people into buying. But hey, maybe I’m just looking too deep into them having the exact same design language. 🤷‍♂️

@m.jackson7718

10 күн бұрын

lemme tell you bro, LUCKY 65 is been called "rainy 65", and yes, it did copy Rainy 75, cause appearance is important, you can compare the general looking with their past product, sugar 65

How much is it again? 😂

@Keybored

2 ай бұрын

Hmmm I think I forgot to mention it in the video, but it's something like... $79?

At this price point I don't really care it doesn't have screw in stabs lol. Like c'mon.

I don't understand the hate for plate mount stabs. all stabs can sound good if you mod/lube them properly and they have proper tolerances. complaining about plate mount is akin to complaining that all switches aren't factory lubed to me. is it nice? sure. is it a deal breaker? nah not really

@Keybored

2 ай бұрын

Not a complaint, but it was an oversight. How I see these entry boards is a platform for new comers to try things. Switches, keycaps, foam, no foam, and stabs. It'll help them understand how these things effect the keyboard and whether if they want to pursue more boards in the future. In that sense, having the option of trying out the many great screw in options (there really aren't many plate mount options out there) will help imo

@reaper117nobody7

2 ай бұрын

@@Keybored my counter to that would just be that screw in stabs are great for people whom are already into boards that can tune them on the first go. If they are just getting into it though, plate mount will be easier for them to remove to tune.

@m.jackson7718

10 күн бұрын

@@reaper117nobody7 bro, plate mount stabs is actually useless... if you check the market have most intense competition on keyboard - China, plate mount stabs are nearly extinct.

that is the cringest thing i have seen a 40 year old man do

Is there any 75 layout keyboard something like this with cheap price and nice quality for clacky keyboard.. with a lot of color choices

@MeliChannel95

2 ай бұрын

I think if you want something more custom you’re gonna have to pay a premium price. There is some 75’s that are cheaper. Customization just needs to be sacrifice.

@Zorooooooooooooooooooooooooooo

2 ай бұрын

Rainy75😊

@Hongdangm

2 ай бұрын

@@Zorooooooooooooooooooooooooooo i want something to build by myself also about $200

@Hongdangm

2 ай бұрын

@@MeliChannel95 kk these days i see so many 65 layout custom keyboard but i want 75 layout and also with my clacky build..

@qdm1386

2 ай бұрын

Monsgeek?

First!!!!!!!!!!!!

@Keybored

2 ай бұрын

Congrats!

가격이 ㄷㄷ ㅋㅋㅋ

@Keybored

2 ай бұрын

ㅎㅎㅎ 넵~

I'm out doesn't support VIA

All the negativity just because it doesn’t have pcb mounted stab support? Idk man, I feel like that’s pretty unwarranted.

@Keybored

2 ай бұрын

Not really negative, my opinion!

@switchprocontrollersplatoo7240

2 ай бұрын

@@Keybored which is true, I just don’t agree that it makes the board all that bad, especially at the price point. Don’t get me wrong, I love your content, I just simply don’t agree :)

I love this dude's acting. I don't like "those" kind of people too 😂

@myselph1761

2 ай бұрын

You mean you dislike people who judge others by their appearance? Me neither 🙃

qwe

Under 1 hour gang 👇

@Keybored

2 ай бұрын

Welcome!

Wait. Are you insinuating that there are only two genders?

Where is @HipyoTech ?

@Keybored

2 ай бұрын

Hanging out with Lola!