As a born and raised Lis fish surfer. Sunset Cliffs/Ocean Beach local. Watching so many boards shaped and shaped myself, we never cross plane. Glad to see you are keeping the idea alive and relevant. 🌊🤙

@1stDayofSummer

5 жыл бұрын

Now that's a compliment! Thanks

@samrichardson3128

3 жыл бұрын

Hi there, thanks so much, this technique Matt Kazuma taught me in Maui. Its a proven trusted method and is super accurate.

Great job. I clicked on this because I saw him using a skill saw on the outline. Smart. I use them cutting curves on wood gates, and when shaping a board I’ve used one to cut rocker when my planer was malfunctioning. Can be used to cut specific width concaves too.

Hand shaping and handmade is awesome, respect as a Surfer-Shaoer-Artist myself. Great time capsule of the process guys👍🏾

@1stDayofSummer

4 жыл бұрын

Naming it 'time capsule' is a huge compliment! Thanks Paul

@samrichardson3128

3 жыл бұрын

thanks so much

Cutting w/a skill saw? Impressive. It looks a lot easier than an actual saw.

@samrichardson3128

3 жыл бұрын

Yep this saw is amazing super clean cuts, always at 90 degrees

so good to know it's in portugal. next time i am there i'll head straight your way.

@samrichardson3128

3 жыл бұрын

Great thanks, come by our shop Coffee & Waves in Lagos

@robertcaron9181

3 жыл бұрын

I'm from Portimão, next door, where are you in Lagos? Obrigado 🤙

@1stDayofSummer

3 жыл бұрын

Hi Robert! Sam, the shaper is located at Coffee and Waves, (underneath) a coffeeshop in the center of Lagos. You can buy the boards there too

Outstanding job, or to me it's pure art.

@1stDayofSummer

3 жыл бұрын

It is!!

Beautiful

@samrichardson3128

3 жыл бұрын

Thanks

Lovely Board

@1stDayofSummer

3 жыл бұрын

Especially on waist to chest high it rides like a dream

@samrichardson3128

3 жыл бұрын

Thanks she's a good looking one this one

Thanks for share, Nice job

@1stDayofSummer

4 жыл бұрын

You're welcome! Glad you liked it!!

@themaxdog

4 жыл бұрын

@@1stDayofSummer it's like watching a mirror, so I know how it feels, we need more people using their power for creation and imagination. too,

🤙🏻great job 🔥🔥

@1stDayofSummer

4 жыл бұрын

Thanks so much!

Awesome edit mate 👍🏽

@1stDayofSummer

4 жыл бұрын

Thanks so much!

How does this doesn't get more views? Great content.

@1stDayofSummer

5 жыл бұрын

Thank you so much fore the big compliment! It's a very niche subject, but the views are slowly building ;). Spread the word!

Beauty

@1stDayofSummer

4 жыл бұрын

Absolutely

amazing content.

@1stDayofSummer

5 жыл бұрын

Thank you so much!

would love to know what tools you use and can your measurement template be bought, im starting out please

@1stDayofSummer

3 жыл бұрын

Please contact the shaper directly.

@samrichardson3128

3 жыл бұрын

so the tools i mostly use are very simple and can be bought from most good hardware shops, however if you want better stuff you can find online if you shop around. My template i can't sell you but try www.blendingcurves.com they have a load of free ones there. Hope this helps

Wish you included some comments on the concave! As far as I can see just a subtle single into flat?

Spelled "coloring" like an American. Fuck yeah!

I pretty much like all the innovations and improvements that comes with research of new materials. What are your basics concerns and opinion about eps or pu while considering a shape ? I just had a eps fish ordered here in Rio,Brazil

@1stDayofSummer

3 жыл бұрын

Hi Daniel, thanks for your comment. You can send the shaper a message via www.bobs-boards.com/ as this is not his channel. As for me personally, I hope the material used for boards, wetsuits, etc. will become more sustainable in the future so it is more in line with the surf culture. Enjoy your new fish!!!

@samrichardson3128

3 жыл бұрын

Hi there, the shaper here, so i personally only shape with pu although i have shaped both. I mainly choose pu over eps for its amazing finish and density especially for classic shapes like a fish a bit of extra weight can be advantageous. EPS has its place for high performance lightweight boards. Also the selection of pu blanks over here is much better. Hope this helps a bit

amazing craftsman ship and care! clear to see! nice work. shaped in portugal but can you ship to the uk?

@1stDayofSummer

4 жыл бұрын

Hi Danny, send him a message via www.bobs-boards.com/ Pretty sure he can ship to the UK.

@samrichardson3128

3 жыл бұрын

Hi there thanks so much, but yes i do ship to uk even after Brexit. Sorry for the very late response

sick board! how many inches from the tail did you set your boxes? im planning on glassing mine on, but trying to figure out where i should place mine. i was thinking 8-9 inches?

@1stDayofSummer

4 жыл бұрын

Hi Samuel, please send the shaper Sam a message at www.bobs-boards.com Thanks for watching!

@samrichardson3128

3 жыл бұрын

Hi thanks so much, so it depends on the length of the board, tail width, fin base and surfer height but a good starting point is 7.5" off the tail, hope this helps, sorry for the very late response

which planer is he using

Hey! What are your deck rail band dims? Thank you so much

@1stDayofSummer

4 жыл бұрын

Hi William, please send the shaper Sam a message at www.bobs-boards.com Thanks for watching!

@samrichardson3128

3 жыл бұрын

Hi sorry for late response, ha, so try 1 1/2" and 3" as a good starting point but this is only a rough guide and i vary this depending on the rail shape i need

Where did you get the Equipment from?

@1stDayofSummer

4 жыл бұрын

Hi Joe, I think you mean the equipment to shape the board. Best to send Sam a message through his website @t Good luck with the shaping!

@samrichardson3128

3 жыл бұрын

Hi there checkout shapersupply or greenlightsurfsupply, depends on where you live

Your 100 subscriber

U want to do a giveaway 😂😂

So you use proper coal filter mask for you and only dust respirator for that girl when working with resin?!? That not nice from you. 🤢😷👎👎👎

@1stDayofSummer

4 жыл бұрын

And what about the videographer! 😉

@pangrac1

4 жыл бұрын

@@1stDayofSummer True.