Best instructional video out there for opening a safe!

The bent handle of the change key will always face the lock bolt when inserting or removing the change key. Additionally the change key is turned to a position so that the handle is in the confines of the footprint of the lock, if viewed from the back of the lock. Keeping this in mind helps you always know which way to insert the change key, rotate it and remove it, no matter which mounting position the lock body is in, LH(Left Hand), RH(Right Hand), VU(Vertical Up) or VD(Vertical Down).

Excellent video ! Thank you !

You just saved my ass at the job lmaooo

you should do one of these on how to crack a safe lock from your old 1871 rochester ny safe

Howdy. I just purchased a safe and the fence in the lock was missing the spring. Can I order parts or do I need a whole new lock?

Thanks 🙏

Should it be turning super smoothly? Can I spray WD-40 into the wheels withing the lock housing? I feel quite some resistance when turning the wheel.

The end where it goes back 10, is that necessary, I have seen other change videos where they just stopped on the last digit.

I changed my combination no problem. It was good for a year, until I went on vacation,..it looked like they beat it with a rubber hammer? Then it would not open,.. I tried and tried 3 months later it opened? I called liberty safes, they sent a new lock? I installed it,... but it would only open on one number like 45? It will not spin a complete turn to set a new combination? Oh yeah, the changer key when its in the right place wont go in?

Hi Shawn, thank you for the changing combination information especially; using the key. But; I do have one ? when you changed to the new number you appeared not to go back and start at zero before entering the new number or do you have to do that only after the first time when changing to a new number?

@alisonrcraig1

3 жыл бұрын

Hi Stew Beef, 0 isn't required in any way when changing the combination. The only things you have to pay strict attention to are the numbers in the previous combination and the new combination when they come under the needed index mark.

I have an SC wall safe and dont have the combination, i did when i moved in my house but i lost it. What can i do. Am i out of luck?

@alisonrcraig1

3 жыл бұрын

You can call the manufacturer of the safe (not the lock manufacturer) to see if they have the old combination, otherwise you need a technician to open. If a technician does have to drill, it won't ruin your safe, just the lock which can be replaced.

I haven't opened my safe for 4 or 5 years . Now it won't open or come to that hard stop . I am certain I have the correct combination is there any chance my safe has failed and is in need of repair ?

@Doctorlockpick

10 ай бұрын

Good luck getting an answer. These lock people keep everything a secret so they feel special

Be nice if I could get safe to open. It's manual dial & does NOT require any key.

Hi How know the numbers. Please help

Good video but at the 1:57 mark you say if you have dialed the combination INCORRECTLY you will come to a hard stop when you dial back to the left. It should be CORRECTLY. Just changed out a digital dial with a new mechanical system from S&G.

@iceduckz

Жыл бұрын

I think he meant if you have DIALED THE COMBINATION IN CORRECTLY. Which is weird, he should have said if you have DIALED IN THE COMBINATION CORRECTLY. Just my 2 cents:

@davidjones-vx9ju

Жыл бұрын

@@iceduckz yea....if you have dialed it in correctly

@davidjones-vx9ju

Жыл бұрын

but closed caption says incorrectly

@sana-cm7oc

10 ай бұрын

@@iceduckz yes he used a very poor choice of words

I did however wasn't able to open.

@dohaumanghaumang9523

2 жыл бұрын

I got it now. many thanks😊

@jalaljawad9651

8 ай бұрын

How did you open?