I'd recommend throwing a guard on the hose between the power valve cover and the hose on the left side. Bypassing the thermostat helps so that it's not so rigid, but in even a little tip over the radiator can flex and pinch your hose to the engine. Happened to me at least!

@alabamadirtrider

2 ай бұрын

Good tip!

Mate, super helpful, doing this exact job and was great reference!

@alabamadirtrider

2 ай бұрын

Awesome, glad it was helpful!

If you trim the end of the hose about 1/4 - 1/2 inch where it goes on the head that will reduce the bend for better coolant flow. FYI we offer the hoses and T hose at a much more reasonable price.

@alabamadirtrider

Жыл бұрын

I didn't realize you can just cut those, I assumed it would compromise the construction in some way and possibly allow it to split.

@MotoHosedotcom

Жыл бұрын

@@alabamadirtrider Yes hoses can trimmed with a fresh razor blade or a tubing cutter from Lowes Home Depot. …… just make sure to be careful not to cut yourself while doing it.

@alabamadirtrider

Жыл бұрын

Thanks for the tip, I'll try trimming it next time I'm in there

Thanks for sharing!

I have been wanting to do this on mine too. You made me not want to do the "T" hose

@alabamadirtrider

Жыл бұрын

My really came out rather easy, but if you search KZread you can find examples of it going poorly. I think if it doesn't go easily, heat really is the next best step so that you don't strip out the splines.

@meder07

Жыл бұрын

Relatively easy to do, just finishing up putting back together. Just need a socket for the tube removal tool and put a long thinner hex wrench from the side through the top holes to keep it fixed in the frame. Slowly turning the socket will break the top coated threads. Curious if anyone has put some rubber grommets or something at the top over the t-hose outlets to keep the hose from rubbing against the frame.

@JimJamJammer

Жыл бұрын

@@meder07 😂 No need as nothing will happen! Samco hoses are top quality and only way to find out is by using them. Fit correctly and you’ll never look back.

Can you share a link for the two hose clamps for the T piece?

@alabamadirtrider

3 ай бұрын

If you go to the Slavens website and look for the T hose, you'll see a "clamp kit" in the "kit" dropdown, that's how I got mine. For example, here is the one for my 300: slavensracing.com/shop/frame-t-piece-hose-for-ktm-by-samco-sport/

@user-fq1le4ic4u

3 ай бұрын

@@alabamadirtrider Thanks! That’s helps a lot:) appreciate you answering me

@alabamadirtrider

3 ай бұрын

Not a problem, glad I can help!

Looks like your hose from t peace to head is upside down

@alabamadirtrider

10 ай бұрын

I test fitted it the other way and it didn't look any different, I'll just trim the hose next time I have it off. Hasn't been a problem so far.