dude, excellent video. Easy to follow, great camera angles, good explanations. 10/10

great video, straightforward and covers everything to do the job, and no annoying camera shake. one of the better instructional videos I've watched.

I'll save this video for my future 1992 chevrolet s10

Great Job...Love it educated me on some minor repairs!

One of the better step by step instructions I've seen. Thank You.

Hey Mate! Great Video! I want to restorat my 83 S10 to! Looking forward for new videos!

Thanks a lot your video was great he was telling me I need a window regulator and it's just a channel I took the door part and looked at it thanks a lot for being really in-depth on your videos and keep up the great work sir 😎👌👍

Thanks man. My driver's side window had gotten a catch in it about 1/4 the way rolling it up. Well after a year of, "I need to look into that", the window to my surprise ended up cockeyed in the door yesterday.

Thanks for the video!! The shower curtain was a great tip!!

Yes finally found a video so I can fix my 93 s10 window seals, thank you so much

@landonrenigar8488

2 жыл бұрын

Same

@ifabforfun

Жыл бұрын

@@landonrenigar8488 same

@WVgirl1959

4 ай бұрын

Same, 2000 model

Great video. Just bought a 91 Sonoma. Please post more tutorials. 👍

Very well explained !!! Nice work !!

Great video thanks 🙏

bro i been waiting for a video like this thanks

Very good video .start to the point doing mine next week thanks a lot buddy love the video

Great job man helped me a ton

Great video!

Thanks man. Going thru the "new to me" 92. S-10. ✌️

I don’t know if you even still use this account but I’d love to see more about this I’ve got my own 84 s10 that I’m gonna start fixing up and turn into a project truck with my dad and stuff like this is nice to watch in general and extremely helpful for me

Best video ❗️❗️

very good ,sir!!!

Carmine red, same as my 86, great video

Dope vid

Easy work😊

Gently my friend excellent video you have did a magnificent job

Great vid let's see more of your s10 those ole square bodies are eye candy

@sternthemern7014

3 жыл бұрын

Agreed my gut. Love my 91 s10

Thanks a lot

Thank you

Helpful video. Need to do this soon, truck is so loud on the highway cause all my seals are rotten.

Best version I've seen! Hope you do many more projects...

What adhesive did you use to put your moisture barrier up? Thank you for this video. My little '91 S10 is still trucking, but has had trouble with the windows! Your video will be very helpful for my next little project in restoring him (his name is Hugo.)

Hello, thank you very much for sharing this video, it has been really interesting and very instructive. I have a s 10 from the year 1985 and I need to buy several spare parts for it. It would be so kind to tell me where I can buy them. Thank you for your attention and kind regards from the Dominican Republic 🇩🇴

Great video, where did you get the seals?

Hey my man more videos on this maybe?? I have a 91s10 and I'm finally in a place to start slowly restoring things

@miguelbariasheredia5650

2 жыл бұрын

Hi gentleman! I hope you are well. I have a 1985 s10 pickup and need to purchase several parts for it. You would be so kind to tell me about some stores where I can buy the accessories. Thank you for your attention. Kind regards from R Dominicana 🇩🇴

@danmekeel7758

Жыл бұрын

@@miguelbariasheredia5650 LMC, both doors 178.00 all New, better than Factory,

It's very interesting that most of these window channel felt replacement vids for GM trucks do it without removing the glass. It actually looks easier with the window out. But I understand that removing the glass seems scary. Break the glass and you're in a heap of hurt.

Where are all the other parts? This video was well done. Was hoping to watch more of it.

@cat2011o9

2 жыл бұрын

Me too didn’t realize this was 3 yrs ago 😅

Thank you! where did you buy the run chanel for the window

I don't know what type of camera trick you used to get that passenger window glass back in, but I'm gonna try it tonight on my sons truck. If this window doesn't break, I will give you a shoutout... it's been 3 days of wrestling with that thing to no avail... LOL

@musclemanmitch3380

4 жыл бұрын

I did mine without taking the windows out.Just roll it all the way down.

@3Wheels1Block

4 жыл бұрын

@@musclemanmitch3380 I got it back in, I will be sure to give you a shout out when I post the video! Thanks

@musclemanmitch3380

4 жыл бұрын

@@3Wheels1Block on the passenger side it didn't go as easy as the driverside.I spent a couple hours trying to get the front part in then I realized if I took the channel run back off when I rolled the wondow halfway it rocks back and forth.I tilted the window forward towards the fender installed the new window channel then rocked the window back in the channels of the molding and it went fast.I probably could have done it on an hour if I knew that.

Nice. Have you done the ones that go across the door

What kind of adhesive did you use to seal the edges of the moisture barrier? (And thank you very much for this. Well done!)

Where did you buy the seals

Do you have a video on how to lift a 1989 s10

Great video with helpful info. Quick question. When it comes to replacing the vapor barrier, what do you use to adhere it down? I have an 89 s10 that needs the exterior door handles as well as the window seals that you replaced done. I figure I'd get it all out of the way while the door panels are off. I've not poked in so I don't know what the condition of the barriers are. But I'd rather be prepared to replace it than rush around mid project picking things up.

@DVDBLDS

4 жыл бұрын

Butyl tape. 3M makes the stuff I've used before.

@JonarRoman

4 жыл бұрын

Thanks! I was just going to use Gorillia Tape but that looks like it'll be better.

what does the moisture barrier protect from moisture?

Hey man cool video! where can i purchase all the parts that i need to fix my window. i have the same truck. My truck is missing that small peice that connects to that small hole on the window.

@williammurray8060

3 жыл бұрын

That batwing plastic guide can be found on Ebay

Where do you order your parts? I have a '93 s10.

Hey did you replace the window locking clips? I have yet to find any clips that clip into the window molding and stay. The tabs seems to not hold on the rubber like there to short

@lastplacegarage5925

5 жыл бұрын

If you are referring to the black clips on the sides of the glass, then yes, I did replace them.

@PrecisionReplacementParts

4 жыл бұрын

www.prp.com/product/detail/104294?SearchTypekey=&keyword=windowguide&type=All

Where can I buy the window seals for the 93 s10 please if anyone know please let new know

what is the purpose of the shower curtain?

Was there felt or flocking on replacement rubber?

@southernracing2468

Жыл бұрын

No we just did one and that was the whole reason we ordered it lol it didn’t come with the metal strips to lock it in or nothing like that

We’re can I order the seals.

Where can I get the metal channel brackets that you said not to damage? Mine was damaged during the disassembly. The channels are pretty easy to find, but I can’t find the metal brackets.

@joshescalon1554

2 жыл бұрын

LMCtruck.com I think has them, I did however but the whole new kit for this project. Worth it

@jake12.48

2 жыл бұрын

You can always go to the junkyard, I get tons of small parts like that from there

What soundtrack is this

Hi i have a 91 s10 Chevy blazer an i am putting a new window in the drivers door can you tell me where i can get the glass guides i can not find them any where thank you

@joshescalon1554

2 жыл бұрын

Try lmctruck

@Acejunior7

5 ай бұрын

That LMC Truck is awesome. They have hard to find stuff. @@joshescalon1554

link to the seals please >.>

Definitely tell this isn't your 1st install.

Where would one find brand new door panels for a 92 s10?

@keithjohnson2602

3 жыл бұрын

You can try eBay. I got a pair of used ones for my 93 pretty cheap. You can also try LMC truck for new ones. Just remember to match your color closely. Good luck!

Where is Part 2.

Link to buy new window seals?

@lolohernandez545

4 жыл бұрын

LMC truck for your S10 parts

Anymore videos?

Anyone do this and have an issue with the doors shutting?

Hey amigo! Necesito esos hules y no los puedo conseguir aca en Mexico. Que numero de parte son y donde los compraste?

@sinful5704

3 жыл бұрын

Parts numero 1AWSS00121 por 88 s10

@isaiazarce5497

3 жыл бұрын

@@sinful5704 muchas gracias amigo! Bendiciones!

Fuuuuuuck i super glues the window lever in when i was mad at the heat now i think im fucked

you should've play some deep purple music in the background instead