Nothing will test your patience like trying to get this clip out. Thank you so much

@kerrycopito5965

5 ай бұрын

fr

I love you. I was an inch away from ripping the handle off the door.

@bankrollbotsTV

2 жыл бұрын

Me too 🤣

@pamulahwilliams1744

2 жыл бұрын

@@bankrollbotsTV Me "3"!!🤣🤣🤸‍♀️.

@Fafyy

2 жыл бұрын

facts😂

@anthonyharlan9764

2 жыл бұрын

@@pamulahwilliams1744 me 4 🏋️‍♂️😭

@JimSul

Жыл бұрын

@@pamulahwilliams1744 q11¹)

This is the most helpful video in all of KZread - piece of cake! Thanks!

The second you took it off my brain was like “DUH OF COURSE WHY DIDNT I THINK OF THAT.” Came off in ten seconds. Thanks bro.

Hey Mighty Mechanic, First let me start by saying that I pride myself on how mechanically inclined I am. But this handle removal got the best of me. I just couldn't figure it out. Thank you SO MUCH for sharing your knowledge. I guess now I won't have to cut the plastic door panel around the handle anymore to get the door panel off. (Major Donkey Ears for ME) LOL. Kudos MM, You the Man!

This helped a ton! I’m replacing the speakers in my doors, and I genuinely thought this part would be the most difficult. But it ended up being just as easy as everything else

@resolutionoutdoors9248

2 жыл бұрын

That’s what I am doing lol yeah this helped me out too

@Leo-xw7fx

11 ай бұрын

Me too

Thanks for the info, just had to take one of those m-effers off to replace a broken window and had no idea how to get it off. 5 stars partner! Thanks again.

@pamulahwilliams1744

2 жыл бұрын

M-EFFERS!!🤣🤣🤣🤣🤣🤣!

I am searching for this thing for 1 hour and no one explains it, your video was really helpful

Thank you. Saved me from wreckless disaster. Almost ready to to forcefully pry it off just to get my '91 door to open. 🍻

thank you SO much! it helped me remove the door panel on my dodge dakota pickup so i could bang a dent out of the door! i ended up using a miniature 5.5inch pry bar that had a skinny 90deg bend at one end. the screwdrivers didn't work for me but being able to understand what the situation looked like, i chose the other tool to accomplish the same thing.

That was extremely resourceful, as I am swapping out my manual system for the power window system. Thank you!

BIG THANK YOU! All other vids abt replacing panels omit models with manual window mechanisms! A quick tip: On my 97 Accord, one of the clips was 180 degrees backwards, and it was the easist to remove because I simply pulled the clip from the access point on the handle where one would normally push on the ends of the clip. I reinstalled all the handles with the clips back-to-front, since it's exponentially easier and faster to tremove. ON MY MODEL, at least.

Cheers bruv. Used the screwdrivers for one crank...Then realised I had the damn tool in the toolbox :P

Best removal demo yet.

@ericmcgary911

5 жыл бұрын

TY. Helpful!

I've looked at only about 20 videos and yours is the first one I found with a manual crank.

Just about to do the speakers on my Silverados front doors. Thanks for doing this, nice video

Bro that was so helpful. I live videos that are quick and to the point

Thank you for the quick video and how-to. Much appreciated. Deleting the music/sound effects at the beginning would make it a even better.

Saved me so much time today. Thank you

Thanks my man your a champion saved my arse ❤️ from Melbourne Australia

I never knew window cranks contained wishbones. My cranks need to be painted/replaced, so this helps a lot. Thanks!

Nice video man I couldn't remember how it went back in this video helped

Thank you, your vid saved me a lot of head scratching😊

simple and quick - thanks!

Omg dude thanks for the heads up... Truly helped me out of course with my Focus 🙉🙉🙉🙌🙌🙌💯😎

Great video. thanks

Thanks bro. Quick easy video.

Thanks man, very helpful 👌

Cheers mate! Helped me out allot

You’re awesome bro..!

I'm getting a '78 Ford F-150 that needs a little work, I got to replace a door panel and this will be a huge help.

Thank you brother...great video.

worked great, Thanks!

Make sure that when you're holding your window crank handle in your hand and it has to clip on it that you don't drop it because I dropped mine and it took me at least 45 minutes to figure out where that clip was and God I was livid! 😅 My window track was completely broken and I almost didn't notice that there was a bracket broken off of it and the bracket was broken and I still managed to fix the window only to drop the window crank and have the clip fly through the air and it was starting to look like a beautiful job of fixing my window is never going to be because of a 2 cent metal clip that I couldn't find so my window was never going to roll up and down well on my car none of the windows will be down except that one so I was almost didn't have any windows at all but now I can roll one down oh joy have a nice day

You saved my time and money

Super helpful👍🏼

Had a hard time w the pin but otherwise I git it! Thanks man awesome

Great thanks for sharing!

Very useful 👍

Thanks for such a nice video...

Thank you mate, i am off to give it a try! :)

Thanx man. That helped. 😊

Thank you sir!

Great video thanks

nice.. I saw "the paper clip removal video" looked like it was going to be a hassle. 2 screw drivers is much easier thank you!

@belindavoyles21

4 жыл бұрын

Kool

@listerinestrips1156

4 жыл бұрын

It doesn't work you lucky bastards

@brockabbott8139

3 жыл бұрын

celestino carrillo I watched a guy use the paper clips but he didn’t show you how to set it up. This video was very helpful

@josecampos2959

3 жыл бұрын

J

Great video

You are my hero.

Thank you so much for information ❤❤❤

All this time,,,,and that's all there was to it,thanks you made it look and ,,it was that easy!

Thanks. I was suffering my ass out.. this helped.

You saved my day 🔥🌍

Thanks a lot helpful and simple

Thanks! You can also use a thin shirt and slide it under the base of the handle to pop the retaining ring off.

@scottvanessendelft408

3 жыл бұрын

Used that trick with a shop rag many times..

Great job

Didn't have luck with the dual screwdrivers, instead used a flat head and a putty knife and it worked like a charm. Thanks for posting this as it gave the base concept for getting that damn handle off.

@lite1979

5 жыл бұрын

Good call on the putty knife! My 2003 Dodge Dakota has manual windows, and the way the door card is shaped made it difficult to angle the screwdriver close to the retaining ring.

Thx bro hope i can work it as ez as you did.

Tq so much fast n easy...

wicked, thanks

Thank you!

Thank you!!!

Nice & easy. Mahalo.

I did as I watched and job been done, thank

Thanks!!

thanks boss!

Thank you bro.

Thank You So Much.... You Are Star🎉

Thank you

Yoooooooo!!!!👍👍👍👍👍. Soooo needed this. Just bought a manual handle to replace. Oooooooooooooh My Goooooodness saved Me a Possible Ton of 💰 🤑 Money!! New "Suby" 04/01/22!

Helpful great

you saved my life

thank you mister

Thank you so much

Thank bro 😎

Thank u so much I was about to just brake it off u saves the way

Thank you!! Save me some time

thanks bro!

Good looking

Thanks man

I used to have the actual tool for this. Hmmm. Wonder where that ever went. Thanks for the video.👍

Thank you for your time spent on this well done video.This was helpful

Thank u my heart ❤️

I used a hook tool and pried the door from the handle, worked great clip shot out tho had to loom forever for it. 2 flatheads prolly work too but the hook tool for me is the way to go it’s kind of shaped like a question mark ?

Ty bro

Glad I looked for a video like this before beating off with a hammer.Will this be same for my 1987 mazda b 2000?

Bro thank you so much. It helped me. I drive my friends box truck and that knob is so annoying after 17 hours

The most helpful video I’ve watched in a long time thanks

AWESOME thx

Thanks! Im using this right now lol

Thank you 😫😫 👌🏻👌🏻👌🏻👌🏻

Thanks

i appreciate im trying to replace the exterior door opener on my jeep compass

nice

My 92 s10 handle not fully connected to roll down the window. It does work when I push on it.

Thank You!! You just saved me a big headache!! 🤙🏼

How does one go about removing the bolt for the window crank mine snapped off

Screwdrivers are great for this, but personally speaking, I usually use the 'pick and hook set' from harbor freight to make it juuuuuust a bit easier. Don't get me wrong, this is super easy, barely an inconvenience; I'm just like that.

Bought a truck with manual windows. Thought the manual regulator would be more reliable then a power one... and yet here I am

After watching this a few times and being used to using a paperclip.. I conclude this is magic.

time to tell for subscribe and intro was more detailled of the explanation of what i need to do. another scap video

Thanks hun