Timestamps: 0:00 Introduction 0:07 RUT950 Router box contents 0:53 How to insert SIM cards into RUT950 Router 1:17 Setting up the RUT950 Router 2:00 How to login and set-up RUT950 Router

Is it better to run this using the supplied 240AC adapter (Which for me would mean converting the onboard DC current to AC then back to DC through the supplied adapter)? Would it be better to use a 12v DC supply and forget about converting AC to DC?

@TeltonikaNetworks

3 жыл бұрын

Greetings. Yes, you can supply RUT950 with 12V DC. It has an input voltage range of 9 - 30 VDC. You can check the specification here: teltonika-networks.com/product/rut950/#features.

Could you install this in your car/truck for mobile internet for passengers, devices etc?

@TeltonikaNetworks

3 жыл бұрын

Yes of course. The RUT950 can be powered by a 9-30 VDC power supply unit (PSU). You can find more information below: wiki.teltonika-networks.com/view/RUT950_Powering_Options

One more thing, I need to remote access a PLC device. Is it possible with this device? Does it use a VPN connection or similar to establish connection? Thanks

@TeltonikaNetworks

2 жыл бұрын

Remote connection is possible. RUT950 supports numerous VPN's: OpenVPN IPsec GRE PPTP,L2TP Stunnel DMVPN SSTP ZeroTier WireGuard In addition, Teltonika Networks has its own Remote Management Platform (RMS). It has a dedicated VPN called RMS VPN, which is based on OpenVPN. RMS Platform itself would allow you to access your devices without them having a Public IP. More on RMS - teltonika-networks.com/product/rms/ also you can find this information useful - kzread.info/dash/bejne/oWaltbauk6idpZs.html

Are there different versions of RUT950? I see some have rugged edge with externally accessible sim slots and others with no rugged edge with internal sim slots. I want the first one. Do they have different frequency band support? I live in Kenya and below are the local frequencies: B1(2100MHz), B8(900MHz), B20(800MHz), B28(700MHz) Can RUT950 support all these? Thanks in advance Edit: I see you have an office in Kenya, Avocado Towers but there is no way to reach them. The web based contact form doesn't work.

@TeltonikaNetworks

3 жыл бұрын

Greetings. Yes, there are several versions of RUT950 that support different bands. You can find the full band frequency table here: wiki.teltonika-networks.com/view/RUT950_Supported_Frequency_Bands These options support most of the bands you have specified in your comment: RUT950 U***** Europe, the Middle East, Africa, Korea, Thailand, Malaysia RUT950 H***** Europe, the Middle East, Africa, Korea, Thailand, India If you want more direct support, I suggest asking a question on community.teltonika-networks.com/

if i use uk version ( as im in republic of Ireland) and i want to connect an external anthenna mounted on roof of my house i have a few questions.. 1-what connections do i need to connect to router? 2- if i use 2 x different sims from different networks do i have to connect to them separately or do they run side by side giving me best speeds? 3- do u have an app that i can use for parental control and passwords ect

@TeltonikaNetworks

3 жыл бұрын

Here are the answers: 1. For the antenna connectors you can find them all listed on this page - wiki.teltonika-networks.com/view/RUT950_First_Start#Safety_information 2. RUT950 has a single modem. So only 1 SIM card will be active at any given moment. You can set-up how they switch using SIM switching rules: wiki.teltonika-networks.com/view/RUT950_Mobile#SIM_switching_rules 3. All the settings for RUT950 are configured on WebUI - wiki.teltonika-networks.com/view/RUT950_WebUI

Does this router bond the signals? If I insert 2 SIM cards is it able to use both of them together? So the bandwidth is doubled? Does it aggregate the signals?

@TeltonikaNetworks

4 жыл бұрын

Thanks for the question. The RUT950 has one modem so it can use one SIM at a time. If you would use two SIM cards you could use failover functionality.

@fredericsidler

3 жыл бұрын

@@TeltonikaNetworks have you another product that does bonding and aggregates multiple networks?

Hello I'm in the US. Do I need to go to AT&T do register a new SIM card to work with the RUT950 J? It has to be a data only SIM card correct? Is there anything specific I have to inform my cell company provider? Also can I connect multiple devices to the router like 3 PLCs sharing the same local area network? Thanks for your help.

@TeltonikaNetworks

2 жыл бұрын

Hello Cris, devices with RUT950 J***** product code are meant to be used in US, with AT&T, Bell or T-Mobile mobile network providers. In terms of the SIM cards that can be used, firstly, it doesn't have to be data only, since Teltonika Networks equipment also has SMS sending capabilities . Standard AT&T SIM card can be used as long as it has mobile data. When checking with your provider, it is important to check whether there is a specific APN (Access Point Name) that you would need to enter in order to use your subscription. Lastly, by default, you can connect 3 Ethernet devices to RUT950, since it has 3x LAN ports. There is also a possibility to configure WAN port as LAN, so at maximum, this would allow you to connect 4 devices. However, you could increase this number by connecting a simple switch to the router.

if the router is switched off, how long does it keep the synchronized time up to date?

@TeltonikaNetworks

4 жыл бұрын

Thank you for the question, Christian. The RUT950 router tries to sync time on every boot. It does not have a real-time clock. If the internet connection is available, by default, the time is synchronized with the time server using NTP every 3660 seconds.

Does it work well by using one rooftop 15dbi external antenna?

@TeltonikaNetworks

2 жыл бұрын

Greetings. Everything depends on your location and antenna type, but generally. Using an external antenna always improves the signal since no walls are blocking it.

Hello i have an other question. I use a normal SIM card with a certain data volume, right? I can't set up the router. my computer, an Apple Air book, has no LAN connection. 🤷🏻‍♀️ I've been trying to get this thing to work for months. watched many different videos. it just doesn't work for me.

@TeltonikaNetworks

2 жыл бұрын

If the issue is the Internet connection using the SIM card. Make sure you have APN set correctly - if you are using wiki.teltonika-networks.com/view/Auto_APN - you might need to contact your service provider and set the APN manually. If you still have issue, post your question on the dedicated Crowd Support forum - community.teltonika-networks.com/

how do you install it on the wall or on a DIN rail?

@TeltonikaNetworks

3 жыл бұрын

Here you will a visual representation how the DIN rail is mounted: wiki.teltonika-networks.com/view/RUT950_Spatial_Measurements_%26_Weight#DIN_rail

What 4G networks can this work with in the UK? I can't find a compatibility list online?

@TeltonikaNetworks

3 жыл бұрын

Greetings Alex. You can take a look at the product page. Or the wiki page here: wiki.teltonika-networks.com/view/RUT950_Supported_Frequency_Bands

@alexjohnson1421

3 жыл бұрын

@@TeltonikaNetworks thanks for the reply. Is it possible to use this with an indoor/outdoor antenna? Or do you have to use the included Mini aerials/antennas?

@TeltonikaNetworks

3 жыл бұрын

Sorry for the late response. You can use any compatible indoor/outdoor antennas.

I see this is the only available dual sim router in my country (Kenya). Unfortunately it seems to lack the much needed USSD functionality to take advantage of data offers from the service providers. Removing sim from router to use USSD on phone would be tedious. I would otherwise buy it in a heartbeat.

@TeltonikaNetworks

3 жыл бұрын

RUT950 has no WebUI USSD support but it's possible to send USSD codes using AT commands via CLI. If you need any further information, please feel free to contact our crowd support - community.teltonika-networks.com/

@lenanaH

3 жыл бұрын

@@TeltonikaNetworks Oh alright, I am not that good with command lines but will look into it. Thanks

Is the dual sim a must or just a backup ?

@TeltonikaNetworks

Жыл бұрын

The device can operate with one SIM card only. A second SIM card can be used as a backup. You may read more about SIM switching here - wiki.teltonika-networks.com/view/RUT950_Mobile

Where I can buy this product online in North America?

@TeltonikaNetworks

3 жыл бұрын

Greetings. Fill out the Contact form and our representative will contact you teltonika-networks.com/about-us/contacts/

I have had followed the steps, but failed to activate it. Where is the configuration tab to try again?

@TeltonikaNetworks

2 жыл бұрын

This is only the configuration/setup guide. It does not need to be activated. You can always start it again. Connect to routers WebUI go System / Setup Wizard.

Hi is this a 5g sim router ?

@TeltonikaNetworks

Жыл бұрын

Currently, the only router in our portfolio with a mobile 5G modem is RUTX50 (teltonika-networks.com/products/routers/rutx50)

I can't use a country where I am, especially in Africa.?

@TeltonikaNetworks

2 жыл бұрын

Greetings. You must get a RUT950 with a product code that matches your region Frequency Bands. If you are not sure, contact your local 4G/LTE Internet Service Providers on what Frequency bands are used for the service. Here is the full list of the frequency bands for RUT950: wiki.teltonika-networks.com/view/RUT950_Supported_Frequency_Bands

Is this a legally approved. I am from Pakistan

@TeltonikaNetworks

Жыл бұрын

RUT950 can be used in Pakistan.

Where is the configuration wizard?

@TeltonikaNetworks

3 жыл бұрын

You can find it on System → Setup Wizard page. Or check the Wiki page for more information: wiki.teltonika-networks.com/view/RUT950_Setup_Wizard

Why do i need 2 Sim Cards?

@TeltonikaNetworks

2 жыл бұрын

A second SIM can be from another network provider in case you want to have Failover option enabled.