Timestamps: 0:00 Introduction 0:07 RUT955 Router box contents 0:56 How to insert SIM cards into RUT955 1:25 Setting up the RUT955 Router 2:12 How to login and set-up RUT955 Router

Looking forward to buying this😁

@TeltonikaNetworks

3 жыл бұрын

Awesome! We are delighted that you are excited! 😊 If you will have any questions in future be sure to visit our Crowd Support forum community.teltonika-networks.com/

Hi, do i have to use sim card to connect wifi?

Hello, can i use this device to read/write custom command to RS232 using python? Send collected data to web server using POST?I want to read a serial sensor with custom protocol. Thank you

@TeltonikaNetworks

5 ай бұрын

Could you please get in touch with our engineer team at Community Support Forum? They would be more than happy to help!⁠

If I put 2 sims, does will it use both sims at the same time and load-balance the internet traffic?

@TeltonikaNetworks

2 жыл бұрын

RUT955 has a single modem. So it will use only one SIM card actively. If you are looking for a device that can use two SIM cards simultaneously, check out RUTX12 it has two modems: teltonika-networks.com/product/rutx12/

Hi. Am trying to setup one but cannot get to the login. Upon connecting ethernet cable and open browser url is not working. Please help

@TeltonikaNetworks

7 ай бұрын

Hello, We would like to ask you to register this issue on our Teltonika Community, where we will be able to analyze it in detail and help you resolve it as fast as we can. Here you can find a link to our Teltonika Community: community.teltonika.lt/

Does this router support 4G+ Carrier Aggregation on Three Ireland's network?

@TeltonikaNetworks

3 жыл бұрын

Greetings, only Teltonika RUTX devices with LTE CAT6 category supports Carrier Aggregation. For example, RUTX09, RUTX11, RUTX12. You can read more about this here: wiki.teltonika-networks.com/view/LTE_Speed_Discrepancies

@JoshFlynn101

3 жыл бұрын

@@TeltonikaNetworks Thanks😁

hi can it be plugged into 12v dc in a motorhome?

@TeltonikaNetworks

3 жыл бұрын

Hello. Yes, but make sure you read all the information about RUT955 powering options here: wiki.teltonika-networks.com/view/RUT955_Powering_Options

if 2 sims are inserted will it automatically switch to best signal?

@TeltonikaNetworks

3 жыл бұрын

You have to configure the SIM switching rules. In this case, to switch on a weak signal. More information on Teltonika Networks Wiki page - wiki.teltonika-networks.com/view/RUT950_Mobile#SIM_switching_rules

Excuse me Sir, i have a client which operates heavy equipments on remote area outside of any GSM service. But this client has its own WiFi network in the area that those heavy equipments were deployed. So, can i use this router as GPS client device inside the heavy equipment, acting as GPS tracker & data transceiver, using the available WiFi network there ?

@TeltonikaNetworks

3 жыл бұрын

Greetings. Yes, of course, it is a viable use case. You can use RUT955 as a GPS device and connect it to the WiFi network for a data transfer.

I Have a question . is this device can use internet via sim only? no need for vpn. I mean if my sim has a internet data. it is just plug and play in This unit?

@TeltonikaNetworks

2 жыл бұрын

You can use the device in various ways. Internet connectivity via 4G, WAN, WiFi.

How does it choose between WiFi and SIM? I want to use SIM as a fallback only.

@TeltonikaNetworks

3 жыл бұрын

Greetings. You can set up the failover configuration for RUT955 to use only Mobile. More information here: wiki.teltonika-networks.com/view/RUT955_WAN#Operation_Modes

@angel_machariel

3 жыл бұрын

@@TeltonikaNetworks OK thanks. I'll try it in a few hours.

@angel_machariel

3 жыл бұрын

Hello sir, I have successfully configured this product (partially configuring still). One question: the RUT955 top menu does not respond on touching my iPad Pro. Is this intended? Because now I am forced to use my laptop when I'm on the road, to access and configure the internals of the RUT.

@TeltonikaNetworks

3 жыл бұрын

Sorry for the late response. My only suggestion is to try configuring with a different browser on iPad Pro like Chrome or Firefox.

if one sim fails.... will it auto connect with other sim ?

@TeltonikaNetworks

3 жыл бұрын

Greetings. By default, it will not switch. After you configure it, switching will happen automatically. For example, you have to enable SIM Switching with RUT955. You can find more information on our Wiki page: wiki.teltonika-networks.com/view/RUT955_Mobile#SIM_Switching

Are the WiFi ports for transmitting or receiving? Thanks

@TeltonikaNetworks

3 жыл бұрын

The router supports Access Point (AP), Station (STA) modes. You can find more information on the products page: teltonika-networks.com/product/rut955/

@E3CB

3 жыл бұрын

Thanks

Hi. Do I have to insert 2 sim cards, or will this work if I just insert 1?

@TeltonikaNetworks

3 жыл бұрын

Hi. You can use 1 or 2 SIM cards, depending on your use case.

@russkent321

3 жыл бұрын

@@TeltonikaNetworks Thank you for your reply.

@russkent321

2 жыл бұрын

@@TeltonikaNetworks Hi. I have another question, I hope you can help me. If I insert a SIM card, what happens if someone calls the telephone associated with that SIM card? I need to be able to receive phone calls and Whats App Messages when connected. Thanks for your help.

@TeltonikaNetworks

2 жыл бұрын

@@russkent321 As long as your pair your phone number with an app (you still can receive SMS messages while the SIM can is in the router). You should be able to make Whats App calls and send messages without an issue.

@russkent321

2 жыл бұрын

@@TeltonikaNetworks Hi. thank you for taking the time to reply. I am not quite sure what you mean by pairing a phone number with an app. Could you explain please? Thanks again.

Hi sir, may i ask something? I had use this rut955, but i some problem about error. Error that i had is "out of bounds". Can i get the solution how to settle this problem sir?

@TeltonikaNetworks

Жыл бұрын

Please get in touch with our engineer team 🔵 at Crowd Support Forum community.teltonika-networks.com/. They would be more than happy to help!

Can i setup Site to site VPN with this router ?

@TeltonikaNetworks

3 жыл бұрын

Yes, of course, you can use the RUT955 set-up site-to-site VPN tunnel. Router supports 12 encryption methods. There is also a configuration example for OpenVPN and others on our Wiki page: wiki.teltonika-networks.com/view/OpenVPN_configuration_examples

Hi I just bought one hope is well secured... Cause I got hacked few days back and how can I activate firewall against hackers

@TeltonikaNetworks

2 жыл бұрын

Greetings. By default firmware is enabled on RUT955. Make sure to always have the latest firmware for your device - wiki.teltonika-networks.com/view/RUT955_Firmware_Downloads

@nelsonhope1945

2 жыл бұрын

@@TeltonikaNetworks you just replying since a week ago?

Does the 955 have any ”cons” compared to the 950?

@TeltonikaNetworks

Жыл бұрын

Hi there, when compared to RUT950, RUT955 does not have any drawbacks. RUT955 is more advanced than RUT950. It has additional serial communication options and GNSS. You can find a comparison table for RUT950 and RUT955 here - teltonika-networks.com/compare/?networking=rut950,rut955

@binarynumbers7681

Жыл бұрын

@@TeltonikaNetworks Another question, I understood that this unit was able to connect to another WiFi-network (with Internet-access) trough the WAN-interface. Let’s assume I’ll use DHCP for that and that the RUT-device gets the IP-adress 192.168.0.x The question is now: Is the LAN interface seperated from the WAN-interface or would the same subnet on the LAN-side be a IP-conflict?

@TeltonikaNetworks

Жыл бұрын

In general, when a device has both a LAN and a WAN interface, the LAN and WAN interfaces are typically on separate subnets to avoid IP conflicts. This means that the IP addresses used on the LAN side and the WAN side will be in different ranges. For example, if the device is configured to use DHCP on the WAN side and receives the IP address 192.168.0.x, the LAN side of the device might use a different range of IP addresses, such as 192.168.1.x or 10.0.0.x. This allows the device to route traffic between the LAN and WAN interfaces without causing IP conflicts.

@binarynumbers7681

Жыл бұрын

@@TeltonikaNetworks Yes, but are they physically divided? I mean if the WAN gets the same IP-adress with dhcp that a ”static” non-changeable IP-adress has on the LAN-side.

@TeltonikaNetworks

Жыл бұрын

Yes, the WAN and LAN areas are physically separate and do not share the same IP address. In the WAN area, IP addresses can be dynamically assigned using DHCP, while in the LAN area, IP addresses can be set to be static and unchanging. This allows for network control and optimization, ensuring that devices in the network areas can function smoothly and securely. Thank you for asking and let us know if you have any other questions.

Does this unit to gps tracking; e.g. active track tracing with external service?

@TeltonikaNetworks

2 жыл бұрын

Yes. It does support external services.

Hi

@TeltonikaNetworks

3 жыл бұрын

Hey 🙂