I would have kept the blade untouched personally...after removing the rust. And used wood for handle. 🤔 It beautiful though.

@godzilla362

3 жыл бұрын

That's why you have 1 subscriber while he has like 250,000!!!

@mohsinshahidferdous708

3 жыл бұрын

@@godzilla362 True.

@Freak_Gamer

3 жыл бұрын

I agree. The end result looks less like a bayonet and more like a switch blade haha

@riccardobalbo1369

3 жыл бұрын

@@godzilla362 it's not a question of subscriber count, It's about preserving an historical item. Also, since when subscribers and likes count on someone's opinion? We should all agree with Pewdiepie since he has alot of subscribers?

@aroguepatriot1776

3 жыл бұрын

@@godzilla362 if we follow that logic. We can say that Adolf Hitler had a lot of likes and followers so that made him right.....

I would carry that bayonet during a zombie apocalypse, for sure!

Best restoration youtuber ever, I bet I can send you grandma and will be restored to her baby form

@CoolAgainRestoration

2 жыл бұрын

🤣🤣🤣🤣

The flattened knife point shows this was used ALOT

@andreym5197

2 жыл бұрын

i wonder how it was used

@CoolAgainRestoration

2 жыл бұрын

😅😅

@Cristinact

2 жыл бұрын

I thought the same... How many were killed with this in the trenches??

@raoulvolfoni1800

2 жыл бұрын

@@Cristinact Perhaps only 12000 corned beef cans ...

I actually appreciate that you took a risk and showed other medium (epoxy resin) instead of replacing it with another wood handle. It looks really cool.

@CoolAgainRestoration

3 жыл бұрын

Glad you liked it Jane and thank you very much 😇🙈

I love how it all turned out, though I do recommend getting a hold of some good wood for the handle. The epoxy looks great, but it can’t beat the feel or look of the wood.

@CoolAgainRestoration

4 жыл бұрын

You’re right but this was my intention when I decided to do this restoration. I thought some people doesn’t like it but..🤷🏼‍♂️

@javicorfu

3 жыл бұрын

Epoxy doesn't look bad, but I would have preferred wood also. I do not like it so much when he uses plastic, I prefer wood and metal beacuse they are long lasting and environmental friendly.

@killertruth186

3 жыл бұрын

@@javicorfu Although he can easily remove them and make wooden handles.

@gaiamission7200

3 жыл бұрын

the epoxy looked way better, wood is a shitty and prone to damage material, embrace the future

@mako8091

3 жыл бұрын

@@gaiamission7200 Gaia be like " THE FUTURE IS NOW, OLD MAN!"

I was going to fault you for not using real wood but the your end product is phenomenal. Well done (and moisture resistant).

@CoolAgainRestoration

3 жыл бұрын

Thank you very much for appreciation D 👍🏻🍀

@DALWAG

10 ай бұрын

He can stab a bitch without worrying about the handle!

I would rather prefer a wooden handle, but as You wrote: Won't be use as a weapon but as a forniture/decor piece... ...it suits the purpose this new one. Keep Up the good work!!! May the Good Lord bless you always!!! 🙏🙏🙏

@CoolAgainRestoration

3 жыл бұрын

Thanks Victor 🤗 stay safe

I always love this kind of videos. They are so satisfying to watch

@CoolAgainRestoration

4 жыл бұрын

Thank you bro 🤗

@user-ht5po3qx4f

3 жыл бұрын

@@CoolAgainRestorationu7x6hz3d

@artyoshka

3 жыл бұрын

@@user-ht5po3qx4f is this some discord invite code

@piriahclowngutz

3 жыл бұрын

Ikr!!!

While you did a good job on it, this piece deserves to be restored as it was originally, with wood handles

@tomo4635

3 жыл бұрын

Yes, I was looking forward to that, with the sideways cuts in them.

0:48 Let's get this out onto a tray.. Nice.

Мачете вышло изумительное! К нему ещё ножны красивые и будет полный комплект! 🤔☺️

I love that most of your restoration is done manually without the use of 100 different machinery. I also like the fact that you leave some marks to show the history of the item. I looked at your early videos and you are improving the camera angle, editing and everything you do. Subscribed.

@CoolAgainRestoration

3 жыл бұрын

Hey! I’m glad that you like what I do and see all my work. Thank you very much Sir 🙏🏻👍🏻🍀

I’m 63 years old and seems like I learn something from each of your videos. Thank you sir.

@CoolAgainRestoration

2 жыл бұрын

Glad to hear that Chuck . I really appreciate your support 😊👍🏻take care

Fantastic restoration! As someone who knows how tiring it is doing lots of sanding I can really appreciate the amount of work you put into this. Lol! Great trick with the wooden dowel for sanding those curved surfaces btw.

@CoolAgainRestoration

3 жыл бұрын

Thank you Daverage. I appreciate it 👍🏻🍀

@andrijadukovic858

Жыл бұрын

Posude. Za prenos xrane

I was skeptical at first when you added the red coloring to the resin, but I actually really like how the handle turned out.

@CoolAgainRestoration

4 жыл бұрын

Thank you,I like too how he turned out

@matzappa

3 жыл бұрын

So do I

@CoolAgainRestoration

3 жыл бұрын

🙏🏻 many thanks

You do incredible restoration work. Witness your loving gorgeous painstaking cleaning and restoring of the blade. You asked for an opinion about the handle so here's my take: this is listed as a WWI bayonet. The name on the blade, the design-all of the metal speaks to an age of around one hundred years ago or more. So, with this incredibly beautiful antique metal blade, my sense is that I would want to preserve it's antiquity and historical look with an actual wooden handle. The artificial material, while nice for many types of furniture, etc. is to me a jarring introduction of the modern into something that is actually old. But, still, the red coloration looks a little like deep reddish tinted burl wood. Ultimately you are a master at what you do and I always look forward to your new videos!

@CoolAgainRestoration

3 жыл бұрын

Thank you very much for your support P F 👍🏻 I really appreciate

I love that you chose to add red to the resin

I like the new handle. I was not sure if red would look good, but it does.

Great job on the knife and thank you for not making the handle look like gold

the new handle was beautiful. I won lie, I would have preferred a wooden handle like the original had, but I might make a knife with an epoxy handle like that myself one day.

@CoolAgainRestoration

2 жыл бұрын

Glad you liked it Patrick 👍🏻😎

The result is very nice, especially because of the excellent work on the handle. Bravo!

@CoolAgainRestoration

6 ай бұрын

Thanks and glad you like it 😊

my only issue is the resin handle, i would have rather it be wood but understand why you chose the resin over wood as it’s visual and a conversation piece so it looks older in a way that you can’t get with new wood: completely understandable and done for the right reasons. it’s visual art, it’s as close as you can get to original condition without a time machine so nicely done!

@CoolAgainRestoration

3 жыл бұрын

Thank you very much 😎

Very nice! I would have preferred to see a new wood handle but the epoxy handle looked far from bad. Something to note is that this bayonet intended to be used in a stabbing motion instead of a slashing motion like you did with the watermelon, so oftentimes the bottom side was left fairly blunt.

When I first saw the title about epoxy handles, I wasn't so sure, but it turned it so much better than expected. Great job.

@CoolAgainRestoration

2 жыл бұрын

Thank you very much Curt 👍🏻

It saddens me everytime I remember this thing probly stabbed into atleast one person. I mean, it looks so nice

I liked how you did the handles. As someone who collects 98 bayonets (typically of the later ww2 period) a ww1 bayonet is hard to come by. The epoxy resin coloring was a nice touch. Unlike the bayonet restoration that I seen before, you made it where it still will mount on the rifle. I didnt care for the sharpening of the blade, as most were left unsharpened for maximum trauma. But it isnt me restoring it. It is up to the collector if they want to add this to the collection. And I do believe someone would add to theirs for the right price. Oh and that knob in the back does come off. All the s98 bayonets were made that way.

@CoolAgainRestoration

3 жыл бұрын

Very useful informations and thanks for appreciation 👍🏻🍀

@alexwest2573

3 жыл бұрын

I think i know what restoration video your talking about I watched it before this one but this video I enjoyed more and I like how it will still mount on a rifle still unlike the other one lol

@CoolAgainRestoration

3 жыл бұрын

I dont have another video with bayonet

@alexwest2573

3 жыл бұрын

@@CoolAgainRestoration it was uploaded from a different channel not yours lol

Absolutely beautiful, love the handle (my favourite colour) and the finish on the steel is superb.

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Gary👍🏻👍🏻 glad you liked 😊

Bravo! Nu credeam ca mai exista asemenea maestrii in tara noastra! Nu credeam ca mai exista traforajul ... Succes!

@CoolAgainRestoration

2 жыл бұрын

Multumesc mult ptr sustinere 🍻

I absolutely love the new handles

@CoolAgainRestoration

3 жыл бұрын

Glad to hear that Janice

Наглядное пособие , как имея прямейшие руки и превосходную антикварную вещь сделать ми-ми-ми анимэ

@user-cf3sp8hy8r

2 жыл бұрын

Накладки не в тему

Ohhh i'm so into this channel!!! Loving so much your work! Thanks for sharing, saludos desde Argentina!

@CoolAgainRestoration

3 жыл бұрын

Ooo Argentina 👍🏻👍🏻👍🏻😊

what a great restore! I use mine for getting the meat off the bone on large pieces, where I dont want to use my nice kichen knifes, before the grill. Mine is a German K98 Bayonet is good condition considering it’s age. Made in 1942 by fze (F.W. Holler), so the handguard is straight down and smaller, and plastic handel, good kitchen knife for the outdoor kichen.

@CoolAgainRestoration

2 жыл бұрын

Nice 🤩 keep it safe 😎👍🏻🍻

I think a green handle marble green would look good. Nice job 👍

@CoolAgainRestoration

3 жыл бұрын

Thanks Richard 👍🏻🍻

Ohhhh. I have a thing foe edged weapons. Love this

you have become my new favorite channel, I love the care you take into restoring those beautiful pieces. look forward to more.

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Erin 👍🏻👍🏻😊

The epoxy looks absolutely wicked!

That’s a very nice Mauser WWI bayonet. Not nearly as common as the WW2 versions. Beautiful job restoring it.

@CoolAgainRestoration

Жыл бұрын

Thanks 😊

that new handle looks incredible wow

@CoolAgainRestoration

2 жыл бұрын

Glad you liked it 👍🏻

Руки Мастера омолодили...,но и сталь какая ! Золинген !...А тест "арбузный"--впечатлил...Снимаю шляпу

I love these videos. I have a terrible attention span these days so I pretty much always do something else while I watch KZread videos. These are definitely the exception.

@CoolAgainRestoration

4 жыл бұрын

Thank you Liam 👌🍀

Nice work, I like the way you made your own grips, and of course, they can be exchanged for wooden grips at a later date.

Simply beautiful!

More excellent work, you're my favorite channel on KZread. And the handles look fantastic, almost as good as wood!!

@CoolAgainRestoration

3 жыл бұрын

Thank you very much 👍🏻👍🏻

GF1, awesome restoration.👍👍👍👍👍😁😁😁😁😁😎

I thought a wood handle would have been better but after seeing your work on the epoxy - you definitely were correct. Beautiful job.

@CoolAgainRestoration

2 жыл бұрын

Thanks Scott 😊

Wasn't sure when I read the title that the acrylic would fit in but I am loving it, looks fantastic, well done 😁

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Dave 👍🏻🍀🍀

A beautiful result!

I love the handle I was sceptical at first but I believe it's fantastic upgrade.

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Michael 👍🏼

@SuperDl33

3 жыл бұрын

No problem. Looking forward to your next project!

Un lavoro semplicemente fantastico. Un ricordo a chi ha avuto la cattiva sorte di sperimentare quella baionetta.

@CoolAgainRestoration

3 жыл бұрын

Grazie Pasquale 🙏🏻

Not everything needs to be restored to its original, in my opinion. That turned out beautiful. I loved the red you chosen. Imagine the craftsman's face, who forged that originally, if he could see it now?

@CoolAgainRestoration

2 жыл бұрын

I thought that too 🙈

@mooopix5760

2 жыл бұрын

the craftsman was a german forge press ...

Красиво но это переделка. И он не должен быть острым как нож. У него другая задача :)

@andreyv769

3 жыл бұрын

Какая? Вы думаете что бы порезать хлеб у солдат был отдельный перочинный ножик?

@acknodbikes5051

3 жыл бұрын

@@andreyv769 ну так как я имел отношение и к немецкой форме и снаряжению. Я вам сообщаю. Лезвие штыка не затачивалась как нож.

Well done, would have loved to see a new wooden handle though.

@CoolAgainRestoration

6 ай бұрын

At that time I tried to make things different but if I have to restore that sword again , definitely I will make wooden scales 😊

Excellent choice of handle, and meticulous restoration of the bayonet. I am truly enjoying your work. Stay safe. Peace ⚔

@CoolAgainRestoration

3 жыл бұрын

🙈🍀🤗

Glad you didn't go with the obvious. Wood is easy. You went different and it came out great. Most would play it safe. You don't. Well done Sir

@CoolAgainRestoration

2 ай бұрын

Thanks a lot sir 😊

Wow my friend I'm very impressed nothing satisfies me more than seeing a piece of military history restored back to its former glory I love that you made the blade look brand-new and preserve the markings and I love the red handle you made it look near brand new now he needs a metal case for it

@CoolAgainRestoration

3 жыл бұрын

Thank you very much tristan 👍🏻🍀😊

@tristanbarnett6271

3 жыл бұрын

@@CoolAgainRestoration no problem

Love love love the handle and everything you do xxx

@CoolAgainRestoration

2 жыл бұрын

Thanks a lot 😊

Family man using the baby milk doser spoon!!!! 🔝🔝 🔝

i personally would have liked to see the metal blued

I love the new handle. Very cool.

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Monique 😎

Cool and elegant project

Excelente restauración !!!!!! Un lujo felicitaciones 👏👏👏👏👏👏💪🏽💪🏽💪🏽 gracias por compartirlo

I was *so hoping* to see you laser that clean in a matter of minutes. Why not? Was probably your safest option considering the age of the item.

@CoolAgainRestoration

4 жыл бұрын

Sometimes,after laser you need to sanding manually. This step I use it in this video. Will be also laser but i try to improve the machine

Subscribed. Awesome video and bayonet. The red's a nice touch.

@CoolAgainRestoration

3 жыл бұрын

Glad you liked it. Not many has the same opinion

Very impressive work .i always observe the materials you use for the job .i actually learn from watching

@CoolAgainRestoration

4 жыл бұрын

Glad to hear that! Thanks for watching Maxx 👌🍀

What a superb job. I love the handle. Thanks for showing us this restoration

@CoolAgainRestoration

3 жыл бұрын

Thank you for watching john 👍🏻🍀😁

Impressive restoration. However I cannot help but think about my grandfather who lost his right index finger to a German bayonet in the trenches in France....

Handle looks great

@CoolAgainRestoration

Жыл бұрын

Glad you liked it 😊

Beautiful work

Handle scales are awesome

@CoolAgainRestoration

3 жыл бұрын

Glad you like Miguel 👍🏻

You cannot be bested by anyone at restoration. Excellent video

@CoolAgainRestoration

2 жыл бұрын

😇😇😇 many thanks again

Absolutely beautiful. Great job on that

@CoolAgainRestoration

3 жыл бұрын

Thanks Deborah 🤗🤗

Typically don't like epoxy resin handles but yours actually feels faithful to the original. Great work!

@CoolAgainRestoration

3 жыл бұрын

Thank you Chris 👍🏻

Those handles were amazing

@CoolAgainRestoration

Жыл бұрын

Thank you very much Tonia 😊

Excellent restoration..especially the new handgrip..brilliant..👍

@CoolAgainRestoration

3 жыл бұрын

Glad you like 🍀🍀👍🏻

Wow this is my favorite restoration so far! Really nicely done... That's a scary looking sword!

@CoolAgainRestoration

3 жыл бұрын

Thanks man 👍🏻🍀

@mayoactual2065

3 жыл бұрын

Hate to say this but That’s a bayonet

@GetGood5

3 жыл бұрын

@@mayoactual2065 a bayonet is a sword...

I commend the hard work and discipline you apply to the manual side of things. You could have easily used a machine one certain points but you clearly still insisted on using your hands! Well done and it’s a fine make

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Shaun 👍🏻🍀🍻

This is the most beautiful bayonet I’ve ever seen, this beats all the ones I’ve wanted to buy lmao, the handles are extremely elegant

@CoolAgainRestoration

3 жыл бұрын

Glad you liked it buddy 👍🏻

A old guy made great again, color choice on the handle surprising, may not have been my first choice, outstanding job

@CoolAgainRestoration

3 жыл бұрын

Thanks again Keith 🤗

Ah so satisfying! I didn't know It was possible to colour epoxy! Look at this beauty

@CoolAgainRestoration

4 жыл бұрын

Yes,all colours. Tkx 👍🏻🍀

There's nothin' like a Kill Bill reference! 🤣

@CoolAgainRestoration

3 жыл бұрын

😂😂

Lovely handals I like it

Big fan of handle. Darker the better brings out the shine in the metal.

@CoolAgainRestoration

3 жыл бұрын

Thanks Chris 👍🏻

Oh my good golly. You made this old bayonet look beautiful again.

@CoolAgainRestoration

3 жыл бұрын

Thanks Michael 👍🏻

👍🏻💪🏻awesome, thanks for this video

@CoolAgainRestoration

4 жыл бұрын

Thank you Dima G. 👍🏻🍀

beautiful restoration and the handles are beautiful nice work!

@CoolAgainRestoration

3 жыл бұрын

Thank you very much Michael 👍🏻👍🏻

What a nice clean cut in the end. Nice job on the restoration!

@CoolAgainRestoration

3 жыл бұрын

Thank you Very much Sir 👍🏻🍀

I don't know why you are so underated while channels that are worse gain so much popularity.

Whenever I see a rusty old sword, weapon or gun I get somber thinking about how many people have been injured or killed by someone using that weapon. Then I lose all joy watching it be restored.

The handle is a beauty my man!

@CoolAgainRestoration

3 жыл бұрын

Glad you liked it buddy 😎👍🏼

@stomperhk9107

3 жыл бұрын

@@CoolAgainRestoration 👍

Putting a face on the watermelon is just savage. I'm so glad you didn't name it. If you had, you would have had to keep the watermelon as a pet.

@CoolAgainRestoration

2 жыл бұрын

😅😅😅😅 he’s name is Bobby

That proxy handle turned out great 👍

@CoolAgainRestoration

2 жыл бұрын

Thank you very much and glad you liked it. This week will be a new video. Hint: epoxy and wood and Zippo lighter 😊

Really cool project! For the record, bayonets are typically not sharp, they are usually dull because they are stabbing weapons. In any case, you did an amazing job and brought new life to an old bayonet in a really cool way! Keep making great content, I am having a great time watching your restoration projects!

@CoolAgainRestoration

3 жыл бұрын

Thank you very much and you are so kind to say that 😇 grazie

Thank you for sharing your knowledge

@CoolAgainRestoration

3 жыл бұрын

Glad you liked 👍🏻

Restoring a historical weapon can be done either well or horribly. I wasn’t so sure about the resin scales, but you nailed it. Beautiful end result!!

@CoolAgainRestoration

3 жыл бұрын

Tkx Russel 👍🏻🍀

This is cathartic

I love the new handle on that gorgeous bayonet. Awesome job 👍

Look's like a ceremonially bayonet all you have to do is make a scabbard for it a black one inlaid with a silver hilt and tip would make it stand out was not sure of the Handel's but on reflection they are nice.👏👏😱

That came out really nice 👌 Love the new handle 🤩

@CoolAgainRestoration

Жыл бұрын

Glad you liked it 👍👌

Gorgeous bayonet. I love the handles.