Rusty Soviet Water Pump Restoration
Тәжірибелік нұсқаулар және стиль
I found this water pump from my grandfather's house. It is my childhood memories. It has been abandoned for 25 years.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show
Пікірлер: 176
ОООООО!!!!!.Помню,такой у нас в деревне был в конце 80-х,начала 90-х.Эти насосы делал Пермский Электротехнический Завод.Первый насос завод изготовил в 1950 м году.Лайк!.
@tolyn8060
3 ай бұрын
Ах,да.....этот завод до сих пор производит насосы!.
@Tatal.b
3 ай бұрын
@@tolyn8060espero que seja só bombas para retirada de agua
@Beliy--Volk
3 ай бұрын
@@tolyn8060Удивлён, что после 90-ых завод ещё целый.
@tacede
2 ай бұрын
@@Beliy--Volkне все заводы закрылись из за коллапса
Thank you for restoring our water pump comrade.
i suggest having a pair of needle-nose pliers inside the blasting cabinet to hold onto small parts more easily
замечательный насос, у нас на спиртзаводе Федорыч такой установил за забором, а трубку подключил к врезке от цистерны со спиртом, выход протянули за забор. И когда надо было залить канистру, шли к Федорычу ))) спирта было сколько надо. Очень полезный насос, ваще не ломался
Suprise of the day: old Soviet capacitors still working.
@Mohamed_Anwar011
3 ай бұрын
Not capacitors
@longo4833
3 ай бұрын
q
@longo4833
3 ай бұрын
M
@jason_dean4032
3 ай бұрын
@@Mohamed_Anwar011my mistake, I'm not an electronictrician.
@miha4096
3 ай бұрын
@@Mohamed_Anwar011actually capacitors
Молодцом! И обмотки закрыл(заклеил) перед пескоструем, хотя местами была толи соль толи остатки стеклоструйных насыпок, и головку в обратном варианте под метчик приспособил... Прям душу порадовал, спасибо тебе добрый человек! Не бросай своё дело!
Отличное восстановление водяного насоса из СССР, Кама - 8.👍👍👍
@Kostoprav_ai_covers
3 ай бұрын
у него гниющие выводы от конденсаторов не почищенные и не залуженные отгниют всё равно и он остановится... зато люминий покрасил...
@user-zp9pt3qx5e
3 ай бұрын
@@Kostoprav_ai_covers Привет, от гниют не от гниют, это не важно, меня больше интересует, где мастер этот насос нашёл.
Сальник смонтирован неправильной стороной к давлению.При повышении давления сальник раскроется и вода попадет в мотор.
Nice resto, and impressive that the impeller wasn't totally rottet out on such an old pump. 👍
now this is some real work and effort for restoring an valuable item and made it work, from seeing anything that's dirty and full of eggs inside was not scripted or planned, it's a real thing and made by real time not like other fake restoration videos that they threw it to the mud and leave it for days just to rust and come back to hit record for views, nuh uh, go watch this guy restore stuff that wasn't planned to rust it's a treasure to find and worth watching it step by step.
@chitaole8331
2 ай бұрын
Bạn nói rất đúng
@user-sl3il5sz2s
2 ай бұрын
What you describe happens to restorers from Southeast Asia, but this is Russian.
@mistert7246
2 ай бұрын
@@user-sl3il5sz2s the pump is russian, but this is not a russian channel
Родные звуки!!!) Спасибо!)
Hola amigo mi respecto para ti sos otro rollo me gustó mucho el vídeo y me gusta como reparar las cosas saludos cuidate mucho bendiciones a la distancia 👍🏿👍🏿👍🏿
Напрасно мастер не сохранил оригинальный шильдик насоса, он же там был! Это сводит на нет всю работу по реставрации.
Great job thanks a lot, excellent choice for the color paint,best wishes.
Super jest ta pompa stara zabytkowa odrestaurowana bardzo fachowo jest to wszystko zrobione doceniam se fachowców takich jak pan Pozdrawiam serdecznie i polecam wszystkim ten kanał Pozdrawiam jeszcze raz. 👍👍👍👍👍
Great restoration 👏👏
👏👏👏 🙏🙏🙏 Thank you Mr. Gear Show. 😎
Great! greetings from Buenos Aires, Argentina!
Different item nice job
Great job. 👏👏👏👏👏
thank you teacher❤❤❤ Great job, thank you brother. You are so talented
Советское качество 😎
Parabéns pelo seu Belo trabalho. Nota 10.
Now we gonna watch this pump working on battery 😂😂
@djkarcher1896
3 ай бұрын
Should be possible, as this one has a series-wound motor. They'll run on every sort of current, as long as the voltage is right.
This one came out really nice considering its poor condition before the restoration. I've never seen a pump with a series-wound motor though, interesting choice. Good work !
@chitaole8331
2 ай бұрын
Lúc tôi học nghề tôi đã quấn rotor của độg cơ này vào năm 2001
Great job! Yeah, that thing is pretty much immortal.
Instead of a sandblasting machine, you need to use an aquablast; it does not spoil the coating and is better suited for restoration
@E-hab
3 ай бұрын
But he must remove coating!
@dyshikgas
3 ай бұрын
@@E-hab aquablasting removes all coatings and does not damage the base itself
@E-hab
3 ай бұрын
@@dyshikgas Never seen a restoration channel use "aquablast" all of them use sand blasting and I can't see anything wrong with it 🤷🏻♂️
@dyshikgas
3 ай бұрын
@@E-hab There’s nothing wrong with this, it’s just that the aquablast restores the surface more carefully, plus the glass bead polishes and the restoration effect is better, I myself use this service
За этот проект однозначно лайк!
Wow, spiders and cockroaches
Amazing Restoration
Gran restauracion buenisimo 👍
Os meus parabéns , belo trabalho .
nice job. you are lucky that rotor was still working properly.
Very nice restoration 😊
This is excellent restoration! Giving instant subscribe!
this was a common water pump in Romania when i was a kid in 90s
@ionolaru7441
2 ай бұрын
eu o am operationala din anul 1967.dupa ce i-am confectionat alt capac-pompa,acum 2 ani,am demontat pompa,urmand sa folosesc motorul intr-un proiect viitor.marfa,nene...!
Superb work
Wow! Great job
Хороший насос, дачу поливал с его помощью из скважины в 90-х годах.
nice video I watch your videos cause they make me feel relaxed
Luar biasa restorasinya
я в двух шагах живу от завода, где их делали, с балкона видно здание
Nice restoration
Hello mister beautifully restored good job well done
Great Work 😀
Good job !!
Спасибо за видео
After a little bit gap , it's time to see your video.When will i got a rc drill machine from you sir 😅😅??
phục hồi quá tốt
@gear_show
22 күн бұрын
Thanks
Good and unique job I have enjoyed the video.
You are good working. 👌
@gear_show
2 ай бұрын
Thanks a lot 😊
Отличный насос с коллекторным электродвигателем. Его нельзя вкключать без нагрузки во избежание выхода двигателя из строя.
Amazing.Cong.
2:27 lizard egg 😮
We had these in hungary they were eternal like the suffering in life 😃. Only the sealent needed to be good then it ran till eternity.
Professional
@gear_show
22 күн бұрын
Thanks
@oldaz.5094
Күн бұрын
Exactly 👍
Keep it up 👍
Nice Worke
Amazing 4:06
The main power cable, being brown/blue/yellow means that this pump was repaired less than 20 years ago…
👍👏bom muito bom, restauro 👍👏
Great work sir you are awesome 😊❤❤
@CCCP-CCCP-CCCP
3 ай бұрын
kzread.info/dash/bejne/f35ttc6Fmq3LhZs.html
Кама 8? У меня досих пор такой работает, только щётки менял
Very nice! I like water pumps.
У меня такой до сих пор работает, но сальник течет, скажи брат в каком магазине покупал?
@Vladimir_Sabanin1162
2 ай бұрын
Да там сальник стандартный. Сними размеры и без проблем купишь.
Woww, que estudiaste hermano, me interesa todos eso conocimientos, me ayudarías mucho si me lo dices
I got the same pump in the same condition from my grandfather, and it lies idle in the barn
Интересно где вы нашли такой насос😊.
@fsagasdfgasd6243
3 ай бұрын
Судя по всему это версия которая экспортировалась в США в начале 80х. Довольно надёжный и дешевый насос, неудивительно.
@OldHusky
3 ай бұрын
Советскую технику все еще можно массово найти на барахолках и блошиных рынках, даже за рубежом можно отыскать
@user-wy4ps1gk4d
3 ай бұрын
В описании написано что от деда остался.
Your videos are so good, I really like bank's videos
One question. What is the purpose of heat the bolts and them sinking them into the oil?. Is it for the rust?
nice job bro
I followed your method and succeeded, but I need you to make a 200mm disc grinder that operates from 220 to 19 volts, and I hope that it outperforms the Milwaukee brands.
Классическая ситуация, сначала намоем в какой то химозе, потом пескоструим.
Restaurada bomba da água 😉
🎉יפה מאוד
@gear_show
Ай бұрын
Thank you
hi, I envy your sandblasting tool.. at what operating pressure do you use it? Is it a homemade tool? I have a weak 15 liter compressor and a gun bought on Aliexpress but it doesn't work...do I need a special sand?
waiting for your video 😜😊😊
nice video bro
@madmax82988
3 ай бұрын
You couldn't have even possibly watched it all. It might've started to suck
👏👏👏👏
cavitation did its thing to that pump
Good good
This pump probably will or even would have already outlasted its maker
👍👍👍👍
❤
Never saw a brushed motor pump before....
@sergeyblinov4957
2 ай бұрын
This soviet pump has its "roots" from 1920-s US domestic and farm pumps.
Do you like our SL everywhere? 😅
My friend, I need your help in removing the gear of an old German 5-inch rocket. I did the impossible with a screwdriver to remove it. I want any website that can reach me to send the picture. Perhaps you can help me.
why not clean or replace capacitors? о_О
Vot takaja technika. 😂
Didn't you show the same pump already 😂 like 4 years ago
for a video its ok. but not good for use. you didn't recoil the motor or change the capacitor
cuando ami no me interesa alguien o algo como siertas conversaciones yo simplemente lo bloqueo porque es mi celular.
👏👏👍🔝💯✌
Coil and winding must be removed and clean I was wondering what were you doing most important parts of the machine need to be cleaned and reassembled
@davidhamm5626
3 ай бұрын
I do not where what you are saying will make a difference , as long as there are no shorts, it is fine the way that it is.
thank god for filler poor mans answer
produced
👏👍👏👍👏👍👏👍👏👍👏👍🥃🥃🥃
But most of the company They used rotor insted of armature
@gear_show
22 күн бұрын
Rotor is more reliable and safe
👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷