*_That is the most unique piece I've ever seen....what an amazing opportunity for you to showcase your phenomenal restoration skills on. BRAVO yet again. Your part of the world truly does have a love and appreciation for saving these one of a kind masterpieces from the past. Thank you for another satisfying and inspirational video._*

@AyazRestoration

2 ай бұрын

Glad you enjoyed it!😊

Restoration in youtube means sand blasting, removing the sharp edges, showing new ways and tools , you got the talent brother Ayaz , now try to be the greatest because you can do it ❤❤❤❤❤❤❤

@AyazRestoration

2 ай бұрын

I am glad you like my work. I try to make my new video better than the previous one. You will see very soon I will make more improvements in my videos. Thank you so much for all your support☺️

You retain the patina in a classy way. Great restoration.

@AyazRestoration

3 ай бұрын

Thank you so much Max.😊

I now feel very old; as a young man I used to use one of these. It had the buckle plier built in, but other than that, very similar.

@AyazRestoration

Ай бұрын

Thank you for sharing your experience with us. It's fascinating to hear about your past use of a similar tool. Your insight is greatly appreciated.😊

Great job 👏 the hot blue-ing explosion was great! Hot bluing > nickel plating imo

@AyazRestoration

Ай бұрын

Thank you so much. We are glad to hear that you enjoyed the hot bluing process and prefer it over nickel plating.😊

Splendid job you did restoring that strap tensioner. It looks much better and it works like a charm too. Excellent work.

@AyazRestoration

3 ай бұрын

I am glad you like my work.😀 Thank you so much George

Thank you very much for sharing take care great video All the best

@AyazRestoration

2 ай бұрын

☺️

Хорошая работа , качественное видео . Приятно смотреть и наблюдать за процессом восстановления . Единственный момент который не вписывается в видеоряд это разводной ключ , там где должен быть ключ по размеру гайки .

@AyazRestoration

3 ай бұрын

Я рад, что вам нравится моя работа.😊 Спасибо большое. Вы правы, там должен был быть гаечный ключ для этой гайки.

Nice job, really like that shade of blue👍🏻

@AyazRestoration

3 ай бұрын

Thank you so much. 😊

Great job buddy but i sugested sandblasting in the piece then powder coat much better Say hello from Venezuela ❤️🇻🇪👏

@AyazRestoration

3 ай бұрын

I am glad you like my work.😀 I will try to buy sand blasting machine and powder coating machine very soon.😊

Excellent work my buddy congrats to you say hello from Venezuela 👍🏻🇻🇪👏

@AyazRestoration

3 ай бұрын

I am glad you like my work. Many thanks for the congratulations.😊

Beautiful restoration 😍😍

@AyazRestoration

3 ай бұрын

Thank you so much.😊

Great restoration

@AyazRestoration

2 ай бұрын

Thank you so much 😊

Beautiful restoration 😊

@AyazRestoration

3 ай бұрын

Thank you so much.😊

Master Ayaz you need sandblast ❤

@AyazRestoration

2 ай бұрын

You said right. Trying to buy a machine I will buy a sandblasting machine very soon.☺️

Nice restoration and nice movie! Very intresting!

@AyazRestoration

3 ай бұрын

I'm glad you like my work.☺️ Thank you so much

Beautiful! 👍

@AyazRestoration

3 ай бұрын

Thank you so much djkneib.😊

Great job

@AyazRestoration

3 ай бұрын

Thank you so much.☺️

Great job!

@AyazRestoration

3 ай бұрын

Thank you so much 😊

Love that "antique" plastic grip 😂😂'

@AyazRestoration

3 ай бұрын

☺️

good job

@AyazRestoration

3 ай бұрын

Thank you so much.😊 Cheers!

Nicely done! You might want to get yourself a bench grinder with a wire wheel for cleaning parts. :) And your adjustable wrench needs some serious TLC! ;)

@slider1956

3 ай бұрын

how about he ditch the ugly adjustable wrenches & purchase some real wrench’s???

@AyazRestoration

3 ай бұрын

I am very glad you like my work.😊 You will see in the next video I will be using a bench grinder.

Excelente

@AyazRestoration

3 ай бұрын

Thank you so much 😊

Great restoration. Not technically antique, but very nice work nonetheless.

@AyazRestoration

3 ай бұрын

I'm glad you like my work, thank you very much.😊 This tool is very old.

@user-dp2bs3ru8e

3 ай бұрын

​@@AyazRestoration😢

@AyazRestoration

3 ай бұрын

?

Little heavy on the paint as i saw it running and you can hit that plastic handle with a blowtorch for a few seconds to smooth it out

@AyazRestoration

3 ай бұрын

This tool is working perfectly.☺️ You are right, the plastic handle could have been smoothed with a blowtorch.

👍👍👍

@AyazRestoration

Ай бұрын

Thank you so much 😊

так вот как они это скрепляют!

İşlevsel bir restorasyon olmuş eline sağlık. Sadece diğer restorasyon videolarına göre sanki biraz kaba çalışma yapılmış bazı yerlerde bana öyle geldi bilmiyorum. Misal avuç içi taşlama ile doğrudan kaba zımpara yapılması bana farklı gelen kısmı oldu. Belki daha hassas çalışılabilir-miydi bilmiyorum. Onun dışında elektroliz ile pas sökme işi çok yerinde bir işlem seçimi olmuş. Bunun dışında hazır vida seçimi yerine kırılan orijinal vida torma makinesinde yapılabilirdi belki. Tabi bunlar eldeki imkanlarla alakalı bir durum. Sadece belki seni daha iyi yönlendirme kastıyla yazdığım iyi yönde yorum olarak kabul et bunu. Daha değişik çalışmalarını heycanla bekliyoruz, kolay gelsin.

@AyazRestoration

2 ай бұрын

Haklısınız bu videodaki restorasyon işi diğer videolara göre biraz daha zor çünkü elimde kumlama makinası, toz boya makinası vs gibi aletler yok. Alet almaya çalışıyorum videolarımı görmüşsünüzdür şu an öncekilerden daha iyi. Ayrıca restore ettiğim şeyi mükemmel bir şekilde restore etmeye çalışıyorum. Yakında yeni videolarımda çok gelişme olacağını göreceksiniz. Yorum yapmanıza çok sevindim.☺️

@duralikiraz

2 ай бұрын

@@AyazRestoration İnşallah olur. Zira sizlerin sayesinde "mekanik tarih" diyebileceğimiz bir konuda bilgi sahibi oluyoruz. Teşekkürler.

Hello! This is really good work. I'm curious about something, are you from Turkey? That would be good…

@AyazRestoration

3 ай бұрын

Hi! I'm glad you like my work.😊 No, I'm not from Turkey. Are you curious about something?

@aysegul2048

3 ай бұрын

Yes, where does the name 'Ayaz' come from? I am Turkish and men use this name in my country. So I asked. Thank you.

After applying fire, what are you spraying on the hot metal and why?

@AyazRestoration

3 ай бұрын

After heating, spray WD-40 on this part of the tool. WD-40 is then sprayed to loosen the rust on these parts.

10:36 I have been waiting for this to happen to someone. Why tf would you use GLASS???

You might want to re-consider the use of the word Antique, since it clearly isn't. Perhaps "Rusty old", would be a suitable alternate.

@Goochgravysuppliers

2 ай бұрын

Or vintage

😍😍😍❤❤❤❤

@AyazRestoration

2 ай бұрын

Thank you so much 😊

👌

@AyazRestoration

3 ай бұрын

Thank you so much.☺️

Треба зразу всі гайки облити ведешкою , а потім крутити

Please explain: You tried oil in the glass which broke…then you ended up polishing??? Very confusing plus you could have cleaned up the teeth on the sprocket

@AyazRestoration

3 ай бұрын

To blacken the inner side of this part of the tool, the glass is broken while hot blowing. And the outer side of the part I had to polish and polished it

👍👏👍👏👍👏👍👏👍👏🥃🥃🥃

@AyazRestoration

3 ай бұрын

Thank you so much.☺️ Cheers 🍻

We have the same name.

@AyazRestoration

3 ай бұрын

😊

Da fehlt doch was.

@AyazRestoration

3 ай бұрын

Was fehlt?

A few things 1) that's not an antique 2) it's reassembly because you are the second person to put it together and 3) it's supposed to be thanks for watching, not sure if you forgot the s on the end.

You don't need to use glass in your job You don't need to show your false in your video Thank you

@AyazRestoration

3 ай бұрын

🙄

👍👍👍

@AyazRestoration

3 ай бұрын

😊