A lot of detail in this video - I think I will have to watch the whole series again in one sitting so I can fully understand it. Great videos, thank you for taking the time to make them.

@MatthieuLibeert

2 жыл бұрын

correct! it's a packed video indeed. feel free to watch again :D if you have more questions feel free to ask!

Loving this series. Looking forward to the final installment.

Amazing content. You have travel a long way over the years. Constantly improving your skillset, knowledge base, content and character. Impressive young man

@MatthieuLibeert

2 жыл бұрын

Thanks for the kind word! indeed nice to keep improving every day and learning more and more every day!

this is so amazing! :) thank you so much for sharing your knowledge!

Thank you very much, this is the priceless information!

I'm quite late to the party but regarding on how to clean the wax sheet residue from the polyester part. Simply wash with wax degreaser/final wash cleaner used in Automotive paint industry (commonly known as Pre-Kleano)

Love the content and love your approach. Got a bit lost on this one with regards to the wax sheets and the purpose, but I followed well. Appreciate you making this!

@MatthieuLibeert

2 жыл бұрын

thank you! it is indeed a matter of context...I try to make the video's in seperate part to make it more accessible. the wax sheet is used to make a resin channel...might get more clear in the next video, if not, I'll adress your question in a follow up video ;)

Great job. Thanks for the video.

@MatthieuLibeert

2 жыл бұрын

Thanks! hope to find you back in the comment section in the next video ;)

C'est vraiment beaucoup de travail un moule avec ce système matthieu...j'ai hâte de voir la suite 😄👍

@MatthieuLibeert

2 жыл бұрын

en effet, le moulage prend une grande partie dans la fabrication des pieces, mais une fois fait, les pieces suivronts :D a la prochaine video ;)

Top work mate, these videos are so cool and very helpful, I've also struggled with the wax strip, I think last time I used a hot air gun to soften it to remove, then I used isopropyl alcohol to clean the wax and glue off, it may work for you. Keep the content coming mate I'm not alone when I say we love them

@MatthieuLibeert

2 жыл бұрын

glad to hear you like my video's! hot gun helps, as well as solvent...next time I might to try to apply a coat of pattern coat, with release agent, then peel of the entire sheet. more content is coming, stay tuned ;)

Great quality again

@MatthieuLibeert

2 жыл бұрын

thanks a lot! your comments on my video's are highly appreciated ;)

Hello. Excellent demonstration video. I'm trying to make a light RtM mould, but would you be so kind as to clarify some doubts? First, when you create the outer chamber and the inner chamber, the black borders that you glued, are they rubber weather stripping? Or what material should they be? I wait your answer. Thank you

Hello Matthieu! Love your work! Do you know where i can find the air channel bands to make the shape for de back mould? Thank you in advance!

nice one again sir also about your last video that thing you said about silicon only sticking to silicon gave me an idea to lower the material cost on silicon molds and also i tested it and it worked very well and it is holding the cured silicon wastes and shred them into small pieces and mix them with silicon it can produces the same mold with the same quality with much less materials and definitely less cost

@MatthieuLibeert

2 жыл бұрын

It is indeed a common trick to add of cuts of old moulds into new silicone moulds, as long as your waste parts are clean and from the same type of silicone you shouldn't have to much problems

4:38 "infusions might seem easy" That sure isn't my impression. I've watched a bunch of infusion videos and it seems like black magic to me. Thanks for another fun and interesting video.

@ddegn

2 жыл бұрын

I didn't know what RTM stood for. Is it Resin Transfer Molding (Moulding)? It would be nice if you defined abbreviations either at some point in the video or in the description. I'll still watch and like your videos if you don't do this but it would be nice not to need to Google the various terms you use. I'm really looking forward to seeing how this RTM process works. It reminds me a little of the forged carbon parts process Easy Composites has been demonstrating lately. Thanks again for the interesting video.

@MatthieuLibeert

2 жыл бұрын

haha glad to hear you are still interested in new stuff, infusion was black magic for me as well :D untill I tried and understood what was going on :p with this project I'm still in no-mans-land :D finding pleasure again and trying new things!

@MatthieuLibeert

2 жыл бұрын

@@ddegn thanks for your commment! i'll keep that in mind, hope you'll watch coming videos as well! it's an honor to compare me with easy composites, more videos are coming ;)

Your concern to prevent the sheetwax from sticking to the upper mold gel coat, requires PVA to be applied to the surface of sheetwax prior to applying the tooling gel.

Beautiful 💪🏽🇬🇧👍🏽

@MatthieuLibeert

2 жыл бұрын

Thank you!

hey awesome videos as always - do you ahev the name for the fabric cutters /

Hello friend, I have a question for you!, apart from the traditional technique, do you practice CNC machining? on Carbon? plate. Because I want to make mechanical supports with a CNC engraver. Your opinion will be welcome!. 🐸👍

Very nice video!!! Nice explanation of the process. But... no respirator during cutting the dry fibers??? Not very healthy

5:24 “resin break”? Did I miss the part of the video where discussed the “resin break”?

Where did you get that infusion mesh? I've used mosquito net material on small parts with success, but this looks much cleaner. My life became so much better when I ditched the green plastic mesh.

@ErikRobertson

2 жыл бұрын

Btw thanks for making this series. I've read a ton about RTM but have seen nothing else on KZread of this quality. Looking forward to part 4!

@MatthieuLibeert

2 жыл бұрын

@@ErikRobertson It's indeed a mystery for me as well that I'm discovering by sharing these video's. The infusion mesh can be found on easycomposites website :) been testing a lot of infusion meshes, so far this is the best one for 3D complex shapes. Only negative side of things is that it's hard to remove if your not using a perforated film

Is it possible to you to make a video specially for making out chamber ?

I'm so newbie, but why can't you do "more cars" like in the first steps of your video? What's the purpose of this mould? Thank you

I be interested to know what spray gun/nozzle size you used to apply the easy composites Pattern coat primer.

@MatthieuLibeert

2 жыл бұрын

I've used a 2.0 nozzle with the pattern coat being thinned with acetone

@mporta

2 жыл бұрын

@@MatthieuLibeert can you tell the amount of thinning and the pressure you used? Thanks for the high quality videos! 😊

@MatthieuLibeert

2 жыл бұрын

Keep it somewhere between 5-10% to be safe, I spray at 2 bar nozzle wide open, nut this all depends on your spraygun and setup, you better first experiment on a piece of cardboard getting your setup right

@mporta

2 жыл бұрын

@@MatthieuLibeert thanks a lot!!

It is a lot of work, but later if the mould is ready producing is way better than vakuum bagging

@MatthieuLibeert

2 жыл бұрын

correct! It's a lot of work, but once done properly it should keep you some time adding the vacuumsupply compared to regalura resin infusions :)

G4 primer will help on wax, leave it to dry and polish off

@MatthieuLibeert

2 жыл бұрын

G4 From vosschemie?

@gillylife6549

2 жыл бұрын

@@MatthieuLibeert bonda marine is what I have used

Pva on everything with polyester