Rolling Fence Gate DIY - Backyard Upgrades #6
Тәжірибелік нұсқаулар және стиль
Rolling Fence Gate DIY - Backyard Upgrades #6
The building I have been upgrading was open on the back and our dog loved to rest in there. At first I thought it was okay, but then I found out that he likes to chew.
So to protect some of my projects, I built this rolling fence gate. It is heavy duty but nimble enough that I can pull of push with ease.
To keep it in place when positioned, I installed a chain on both ends.
It is simple and easy to build, so I hope you can use it too.
This is the 6th edition in our Backyard Upgrades series, so make sure to watch the others below.
+++++++++++++++++++++++++++++++
Backyard Upgrades Playlist:
• DIY Fold Down Bench Se...
++++++++++++++++++++++++++++++
Amazon Affiliate Links
2.5 inch Exterior Screws: amzn.to/2M6yalW
Axle nuts: amzn.to/2vJmSKP
+++++++++++++++++++++++++++++++
More DIY Project Videos:
10 Simple Wood Projects that make Great Gifts #1
• 10 Simple Wood Project...
10 Simple Wood Projects that make Great Gifts #2
• 10 Simple Wood Project...
Candy Dispenser:
• DIY Triple Candy Dispe...
Pallet Bed Frame:
• Pallet Bed Frame - Eas...
Pallet Bar Table:
• DIY Kitchen Pallet Bar...
Behind Sofa Table:
• DIY Behind Sofa Table ...
Large Custom Dog Bed / DIY How-To
• Modern Platform Dog Be...
Heavy Duty Mobile Shelving / DIY How-To
• Heavy Duty Mobile Gara...
Custom Pallet Wall Decor
• Pallet Wall - DIY Pall...
Shoe Shelf Rack:
• Shoe Rack Shelf DIY Cu...
French Cleat Tool Storage
• French Cleat System DI...
Table Bench 2-in-1
• Table Bench Outdoor Fu...
9 Foot Tall Lighthouse Garden Decor
• Custom Solar-Powered L...
Flag Box Hidden Storage
• Wooden Flag Hidden Sto...
DIY Folddown Bench - Backyard Upgrades #1
• DIY Fold Down Bench Se...
DIY Grill Cart - Backyard Upgrades #2
• DIY Grill Cart ~ Backy...
Concrete Planters DIY - Backyard Upgrades #3
• Stunning Concrete Plan...
Custom Dartboard Cabinet with Rustic Cedar Barn Doors ~ Backyard Upgrades #4
• Simple Dartboard Cabin...
HVAC Heat Pump Fence Cover - Backyard Upgrades #5
• HVAC Heat Pump Air Con...
+++++++++++++++++++++++++++++++
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from KZread library.
2 Timothy 2:20
Пікірлер: 96
I took your lead and modified a little to add casters. Mine is 20" It came out great! Thanks for the idea! Tammy
That patience smile at the end
Great vid Sir, just what I’m looking for. Cheers for taking the time to make it. 👍🏼👍🏼👍🏼👍🏼👍🏼
I was searching for cool ideas for our farm gate and I got it now. I have enough iron anglers and 5 mm iron mesh for 12 feet gate.just I will simply copy your idea and paste at our farm. Thanks buddy for your video 🙏🏼
👍👍 Very good. Thanks for not stretching it out for 20 minutes or so.
@SpecificLove7
5 жыл бұрын
Thank you, I try to keep them reasonable
@beehappy3209
4 жыл бұрын
@@SpecificLove7 agree cheers
Thank you! Detail instructions very helpful.
This is exactly what I need! Thank you!
Great info . Great energy very genuine and easy ti follow . Thanks
Simply genius! Thanks.
Awesome as always, another must do, thanks for sharing.
@SpecificLove7
5 жыл бұрын
Glad you enjoyed it
Love it! Great idea, thanks!!
I love it, straight to the point
Pretty, mobile and cool looking - congrats!
@SpecificLove7
5 жыл бұрын
Thank you
I am thinking of taking parts of this idea for a headboard. Got the creative juices going!! Thank you for sharing. Love your stuff.
@SpecificLove7
5 жыл бұрын
That sounds very interesting, keep me informed
Wow not bad idea,cool!😄
We need a gate for our upper deck, to the lower deck. This gives me some idea of what I need to do.
I love this, gotta make this one also...
Clever solution.
Good job!
Love this. I’m really enjoying this channel.
Great idea !
@SpecificLove7
5 жыл бұрын
Thank you
Another great build
@SpecificLove7
5 жыл бұрын
Thanks
Thanks for the video. This is what I am looking for a nonpermanent fence hide my back yard potted plants. Due to HOA in my neighborhood regulations, I can put it away when not needed.
Awesome job i am working on my entrance gate today good job
Great idea and very cool.
@SpecificLove7
5 жыл бұрын
Thank you
Ty great vid
Genius 👍
Nice video!! Thanks
LOVE UR VID ...
So smart!! My neighbors are always playing in our driveway... this should work!
Love it
🤩 Genius 🙌
wow that's was creative
Very creative! I need you around my house.
@SpecificLove7
5 жыл бұрын
Maybe I can one day 😉
A Homemade... It's Bloody Nice!!!
@SpecificLove7
5 жыл бұрын
Thanks
very good.
You are so creative!!!!! You would be an incredible shop teacher!!!!
@SpecificLove7
5 жыл бұрын
That means a lot, thanks
@Trentacus
3 жыл бұрын
Very true. I have spent two weeks trying to figure out how to make a wood rolling gate. This is the first one that is straight and direct, without trying to sell me things or spend 15 minutes talking about his backstory.
What a great solution! (But then, that's no surprise to me)! : )
@SpecificLove7
5 жыл бұрын
Thank you so much
Nice
@SpecificLove7
5 жыл бұрын
Thanks
I think I’ll take this design but replace the 2x4s with smaller pieces. I don’t need my gate to be this sturdy. Thanks for the help 😊
My only change would have been plastic lattice. All-in-all, a great project!
@offthehook4u
5 жыл бұрын
TL Bradburn plastic would be much easier for the dog to chew through and the reason he did this in the first place was to keep puppy from being able to get into that area and chew things up. But I agree that vinyl would definitely have made it lighter and easier to move.
@rachelleyeager835
4 жыл бұрын
Just tried plastic. It’s not near as sturdy! Flops around.
Love wood lattace I use it for a fence in area rain won't hit it.and added ferris strips to frame it..
thank you
Like your presentation style.
@SpecificLove7
5 ай бұрын
I appreciate that!
Thanks
use 1x4s, over 2x4s. cross lap top and bottom beam. cross member on each panel. fence would be more ridged and lighter
@terrymiller8597
4 жыл бұрын
light enough for wind to blow it over?
Muito bom. Melhor
Instead of butting the 8 horizontal frame members, next time butt the first layer then bridge the first layer with a full length 2x4 then fill in the ends with a 2x4 cut in half. You won't have to do all that horizontal bracing.
@miriamgonzalezsiegel6478
4 жыл бұрын
Paul Smith can you make one for me
@lindsayandmia
3 жыл бұрын
Seriously, I have NO idea what you just said! I wanna build stuff so badly, at 40 years old I have finally realized that's what I have always wanted to do, however, carpentry is intense, so much more then I could have imagined, and the lingo is a whole other language, quite like hearing/ learning IT lingo.....
A very clever solution that also looks aesthetic as well! Great job once again.
@SpecificLove7
5 жыл бұрын
Thank you
Thank you for sharing! My wife saw on the internet one that someone else had done like this. I wonder if you saw the same thing? It can also be used as a portable privacy screen.
@SpecificLove7
4 жыл бұрын
I did not see it but if somebody else used the idea, that's awesome, as long as they did not directly copy my video.
@tmb9126
Жыл бұрын
@@SpecificLove7 Just now seeing this! This is Jeff's wife! Hello! I was just coming back here to see what tires you're using in this. Oh no, the thing we saw had been online for some time. They could not have copied you. Maybe it was actually you? Perhaps you have a website or blog that you had posted about this prior to putting it here on youtube? Blessings!
Good
Could this be adaptable for metal chain link fencing?
Wowwww...
hide the pain in that outro lol great video man
Can you please tell me what size wheels you used? Love this and plan to make a rolling double gate for my driveway, thanks.
@blasterbrain1443
8 ай бұрын
I realize this is at least 1 year behind, as I sit here looking for inspiration from the minds of others, but I believe that the wheels he used are either 8” or 10” diameter wheels, easily found at your local Tractor Supply Company, Home Depot, or Menards.
I'm a dreamer creators been thinking of making my double old gates like your but I want pvc pies and pvc lattaceone like yours!.., ina since it's on a side walk for rolling open ..I think it'll be as fine as yours...wit rain mine has to be pvc...some wheels from frieght sales I'm good with s.alker ones..thanks
I have left over support joists and lumber from my deck rebuild - I want to make a rolling fence but put wagon wheels with a handle so it can be moved easily (no permit needed if it is mobile). The support joists and decking lumber are both about 10 feet long - I have a NFH (neighbor from hell) that I am wanting to block - any suggestions on how to keep it from tipping over? I want it to be long and high - the deck builder cut the pieces for me - I just need to put them together.
Where do you get ready made lattice?
☑️☑️
The wheels on the bus go round and round....
I guess it's more ascetic then getting an already made rolling chainlink fence.
@SpecificLove7
5 жыл бұрын
The wife would not have accepted a chain link 🙂
i would have used solid wheels, not much difference in weight but you never get a flat tire.
Are those the wheels for wheelbarrow?
@blasterbrain1443
8 ай бұрын
They appear to be either 8” or 10” wheels from any of your typical hardware or farm stores. I get mine from Tractor Supply, Home Depot, or Menards - flat-free is my personal preference.
dogg choo fens gatte now
yours is way prettier then mine.
Panu ba mag order
I think this is a great idea but I was thinking about corralling my daughter who is 19 months so she doesn’t run away while we’re playing in the backyard
4:32 ... So this keeps the dogs in? You seen the other exit behind you? Lol good idea though. Gotta watch them fingers too bro. Can't build much with stumps. So, 4 wheels or 6 wheels? How about 3. You could have had it tighter to the fence as well as hidden most of the ugliness of those tyres. On the base you have let's say 4x2.. tyres are maybe 3 inch wide. If you applied skirting on the base you could have had X3 wheels with only an inch or more of tyre showing.
Can you please build me one?
NETTING INSTEAD OF LATTICE WOULVE BE SOOOOOOO MUCH LIGHTER. 1X2'S INSTEAD OF 2X4'S. EVEN BETTER USING 2X4'S CUT IN HALF LONG WAYS. LOL WHAT KIND OF DOG YOU GOT ? A WEREWOLF? 🤣🤣🤣