Thanks for this guide, because of wear and tear some of my Roccat Vulcan switches starting failing and this helped massively. Tore down the keyboard and replaced the affected switches and now everything works again. Again much thanks!

Awesome Content and very easy Guide if someone really tries to follow your steps one by one. Subbed ! Hope you keep having fun with doing more Videos in the future and i wish you more and more success !

@cac2244

3 жыл бұрын

Actually, I am a successful "corporate guy" that is just a techie to the core, so this is why I have no pressure to do videos and I do them to help users (not to make a buck) and this is why it is actually real fun for me to make these when i see clear helping value (vs commercial value). Thanks for feedback, i appreciate.

@extremeaiden7335

Жыл бұрын

By the way I have the roccat Vulcan 120 aimio and sir yours may not be legit

Thanks for making this video! I ordered BOX Jades to convert this keyboard a few days ago. Wish me luck

@ArsenalTheProtogen

3 жыл бұрын

why tho, are you like that one guy at the office that likes annoying people?

Thanks for the guide. I have a Vulvan Pro I wanted to mod a hit and thought it was just the 3 visible screws + the 2 under the flip-up stands and was wondering what was going on. I guess I know why I can't get it apart now 😢

hi, thanks for the video. do you need to deassemble entire keyboard to take out a switch? my shift is getting stuck and i want to remove it and look what needs cleaning so that it moves normally

Great video! Do you have any recommendations on keycaps to use with the roccat stabilizers? HyperX and Glorious Keycaps are too large on thr stabilizer connections, so the space bar is way too lose :(

So I've had the vulcan since it came out, ive been having issues for about 2 years now, having to take apart the keys that stop working and remove dust/hairs from the switches one by one, I've been wondering if I were to change the switches but keep the origional key caps would i have better tolerences on the gap around the switch with some OEM Gateron or MX switches? or is the issue down to the weird top only Roccat keycap the keyboard came with. I've always assumed the key cap just doesn't provide enough dust ingress protection due to not going down over the side of the switch, any feedback is welcome, im 50/50 on wether to throw away/replace the keyboard at this point as missing keystrokes is realllllly bad for gaming and even worse for typing.

I have questions. Are there any other switch that is as close to the titan brown switches? Because I love the tactile feeling they give, but have no idea if there are other switches that are the same, but that I can buy in bulk. Don't really see myself buying tons of Vulcans to steal the switches.

Does the Ducky keycaps work with the Roccat 120 aimo? Only keys i can get with fast delivery. Nice video

What type of volume knob do you have there ? Would like to get the same

Great Vid !!

Cool so i might lube up my Vulcan aimo 122 as a little project someday.

Will it work on my suora FX ? "W" button stopped working and I want to change it to some very rarely used by me button like ins or "X" on the numpad

Did you have to de-soulder anything to take off the PCB panel?

I'm using Roccat 121 AIMO and my keyboard has one switch is broken the switch stem ("plus" thing), it is red switch. Where do i can buy this Roccat switch for replacing?

Where can i buy the roccat titan mechanical switches? Is there a way to buy them?

I have the Roccat Vulcan too but one button isnt working idk if its the fault of the switches i bought this keyboard a week ago for my birthday im just sad because now the keyboard is 159Euro and i bough it for 122Euro i dont know what to do you think if i change the switch it will work?

Is it possible to spray paint the aluminum sheet of that keyboard? If so let me know please

Watching this video for hints on getting a Vulcan TKL Pro open for cleaning after my son dropped half a cup of tea into it. Why do they hide the screws behind the feet and the label? Seems like anti-repairability bastardry to me.

why don't you have a link for the desoldering tool?

Gateron - G Pro 3.0 it will fit?

Hey thank you for the vid! I'm doing the same, but I can't seem to desolder the switches even using high temps such as 380. Any tips? I don't have a gun, I have a normal iron, soldering wick, and a solder pump

@cac2244

3 жыл бұрын

Iron , wick and pump is slow and difficult. The only thing that can help is to use flux. Use " no clean flux"... Other than that, it's a game of patience.

@isaacpablo5144

3 жыл бұрын

@@cac2244 thanks! yeah, it took awhile. Do you think it is possible to change the wire from the PCB to USB-A into a pcb to usb c port? I'm a bit unfamiliar with what I would even be looking for, but you seem very insightful! Thanks for all your help. BIg help in disassembling.

I love the titan browns

@cac2244

3 жыл бұрын

I agree, they are very good for browns. What I like the most of them in the fast "spring-up" time, which is way better on the Titan's than on Cherry browns.

Is it possible to change the stabilizers? If so, has anyone recommendations?

I liked the roccat brown switches on this keyboard, but I absolutely hated the keycaps, as I found them unstable. I also didn't have any problems fitting the "normal" keycaps I have. Replacing switches on this keyboard with soldering is a bit too much of a bother, I think. It is indeed much easier if you have a desoldering tool (and know what are you doing), but if you don't and you would only need the tool a few times, not sure how good investment it is really. With plenty of hot swap boards available, it is much easier to just buy and place any switches you like.

@cac2244

Жыл бұрын

You are absolutely correct, I got many hot swappables from Drop, Glorious, Keychrons and all, so hot swappable for the win. I absolutely love my Keychron V5, as it is lighter and 1800 format, so it is light and complete for business travel and is QMK compatible, so customizable to your heart content.

I would love to hear how the Titan switches sound lubed and with better stabs on this keyboard

@leomoris6083

2 жыл бұрын

Same, im thinking of doing it myself but i dont really want to be dissapointed by the results hah

it's possible to change this black things what are holding key from both sides? i mean from ,,+" key to space key? cause my space works like sh** cause of this things.

Can I buy after market Stabilizers?

super cool video, but i suck at soldering. do you have suggestion for an alternate keyboard, my roccat starts to fall appart. i thought "wow its made with metal, that thing is gonna last forever". :c

@tdebug1

Жыл бұрын

Just get a barebone board you like where you can hot swap switches without soldering. Plenty of those are available nowadays in all sizes 60->100. You can get plenty of different inexpensive switches from aliexpress for example and create a keyboard you like.

nice video, so my wasd keys and the shift key are dying on me, is it possible to replace them with a normal soldering iron? do i need something else to do it properly?

@cac2244

2 жыл бұрын

If it's just a few keys, a normal soldering iron should be feasible, just desoldering the switches will be tricky, but very feasible and its only 4. Make sure you get some soldering wick. It's cheap.

i don't think the preference of tactile over clicky is a region thing. it's the fact that many people who are into mechanical keyboards also game a lot. and you rarely see gamers using clicky switches.

Do you know where I could purchases titan brown switches. A few of my switches don't work well and I simply want to replace them with the same type.

@quazz2400

3 жыл бұрын

i found a pack of 3 original tactile brown switches for 13€ on ebay but also a 70pcs Pack gateron tactile brown switches on banggood

How do I take the plate out?

So if i were to do a switch replacement with some Gateron Silent Silvers would I need to re-solder the switches down or were they only for getting the original titans off?

@cac2244

3 жыл бұрын

Yes, you need to resolder...

@johnathansuwyn4776

3 жыл бұрын

@@cac2244 so I finally got around to soldering my new switches in but about 12 of the replaced switches do not respond in switch hitter. Also the 4,5,6 keys don’t respond on the num pad and i never did anything to them. Any ideas?

Just to let you know there are more screws under the rubber stoppers. Assuming someone has the new model of this keyboard.

@cac2244

3 жыл бұрын

Thanks for that, yeah, me i modded the first original Vulcan 120... so newer gens will be different.

Thx i sadly feel like i need to open my keyboard to replace the arrow up key as it keep crapping out when held down. So for almost all games... It just stops accepting input for some reason. Also the numpad led is almost dead so the quality of the leds is terrible.

@sebastianleister355

Жыл бұрын

Did u replace it? And did it help actually? Because my W starts Makin problems... Won't take input some times ... Well, I just cleaned it from outside and hope for the best that some hairs or dust fucked the connection somehow...

@pino_de_vogel

Жыл бұрын

@@sebastianleister355 no i ended up buying a new one as key after key started to not respond 100% reliable. i still have it for a rainy day project. i feel it might actualy be dust that gets in the switches as even switches that i barely use are suffering from it. i got the laser version now.

does this work with the roccat vulcan 121 aimo i really want to use cherry mx on my 121 aimo but i dont wanna break it

@HazeBaze

3 жыл бұрын

i dont think so. just you cant remove the whole switch. its complete soldered to the pcb :( i actually break 2 connection of 2 switches. naah missed one part of the video. maybe its possible, but i need 2 new titan switches xD

are the new key still compatible with the roccat-swarm? looks like it in the final shot but would like confirmation

@cac2244

3 жыл бұрын

Of course swarm works .. the keyboard brain has no idea what switches are in there, so yes swarm is all good with whatever mechanical switches.

@noiseless4996

3 жыл бұрын

@@cac2244 awesome thanks

4:46, how did you remove the PCB from the front plate? Mine is very rigidly held in place.

@aaronweibel6452

5 ай бұрын

I dont know it either, you got it? I need help

@whatsuphelp

Ай бұрын

You have to desolder every key then you can remove the PCB from the front plate

Magic how did you get the pcb out since mine seems stuck to the aluminium, you skipped that step

@thexerox8939

5 ай бұрын

I failed to mention you also failed to say the switches were soldered down, so yet another step, it's the same roccat.

Do you own a Suora FX, and does the pcb look like it could get its switches desoldered to something else?

@benjaminthurkow491

Жыл бұрын

this is possible with any mechanical keyboard , but can't really get a good way to desolder it, it's a long and hard job to do

@robiocraft2383

Жыл бұрын

@@benjaminthurkow491 Thanks for insight. For me if there is a way, means it’s possible

@benjaminthurkow491

Жыл бұрын

@@robiocraft2383 I think the best method is to use flux and use your soldering iron while pushing with a pair of tweezers. But I'm really bad at soldering so

my Z key in roccat 121 aimo is a bit heavy i can put whole switch off to check it without take off nails and doing as u did in video?

@Cloutair

3 жыл бұрын

I dont know if you figured ths out yet, assuming you probably did, but unfortunately no. You would need to still fully take off the bottom part with screws to even replace one switch.

@houdaplanet9955

2 жыл бұрын

@@Cloutair thank you i contact roccat support for this issue the switch was going crazy with the lights and they replaced me it with a new one they are a great support tbh

Is the removal possible on the 100 aimo too? They seem pretty similar

@cac2244

3 жыл бұрын

Should be...

What switch i have to use for Space . I heard that Space button is diffrent than others. Greetings Alex :)

@cac2244

3 жыл бұрын

Hello Alex ..good question.... 100% of commercial keyboards come with same switch for space bar as all the other switches. Many enthusiasts do put a different switch for space bar but I don't. What I have done in some keyboards is to put an 80gr spring in the switch so it doesn't register while I'm hovering above the space bar... Hope this helps.

anyone know of a video where someone actually takes apart the titan switches? my U key broke on my Roccat vulcan pro, and I really do not want to have to buy a whole other keyboard to fix it.

@pascalmartin033

8 ай бұрын

hello, I have the vulcan 121 with red switch. I started having problems double tapping with a few keys... for the moment, I don't have the strength to open the case, and unsolder the keys... since I really like this keyboard , I bought a second hand keyboard for 50 euros to have spare parts... From what I know, the switches are soldered to the PCB. So you can't easily remove the switch to clean it... A hazardous solution but one that works (without dismantling everything...): 1) remove the flat surface of the black key 2) take a very very fine flat screwdriver 3) insert the flat of the screwdriver between the transparent plastic and the black frame of the keyboard. either to the left or to the right of the switch 4) pry to uncap the transparent plastic from the outside. You will have access to the spring, to the red piece that goes up and down. Afterwards, lubricate the spring and the red part. If necessary, carefully clean the electrical contact. This is a “normally closed” (NC) contact. When you press the switch, the electrical contact is open... I wasn't reassured about opening a switch from the outside but it works! good luck !

Hey I seen your directions on the tt sync fan hub and was wondering if those rgb headers could be 12v

@battosaijenkins946

3 жыл бұрын

@CAC2244, hey man great video! I too have a vulcan 120, and I dont like the keycaps anymore. I have 2 questions if you dont mind: 1) I was thinking of Ducky pudding keycaps instead of hyperX pudding keycaps, will they fit? and 2) How much better is the green switches over the titan? I dont really like titan and ive had this kb for almost 2 years now, thank you!

@cac2244

3 жыл бұрын

@@battosaijenkins946 Hello, thanks for your comment... i have tons of keyboards with Browns, which are tactile so i gave a shot at the Gateron greens since they are clicky and i like them a lot, so if you are into clickies, then go for it, they are great. They are heavy switches at 80gr with but if you don't have a gazillion keyboards like i do and want to stick to one switch, then go for what you like... in my case, i love tactiles, so i love right now my tactile pandas, and since the Drop Holy Pandas (i have 3 full sets and are great) are so expensive then i recommend the Glorious Pandas. I have both and they are very close, so the Glorious (if you can put your hands on them) would be my recommendation. I am typing with these right now on my Coolermaster MK750 that i retrofitted yesterday and i am in love with them... I might post a video about it this week-end. As for the Ducky puddings vs Hyper X, they will fit on it, but they might not fit on the keys that use the stabs, since they are not typical stabs.

@battosaijenkins946

3 жыл бұрын

@@cac2244 Thanks for the info. I bought gateron switch samplers on amazon and decided to go with gateron yellows. Apparently ducky pudding keycaps are on backorder and I read on reddit that its much thicker and higher quality than the thinner hyperx pudding keycaps available at bestbuy. Anyway, I hope i can also change the stems inside the titan switches. I also notice the upper housing is much clearer allowing the rgb light to shine through, as opposed to the other clear upper housings (gateron, mx, etc..)

@battosaijenkins946

3 жыл бұрын

@@cac2244 Sorry I have another question, do you know if the titan switch (clear upper housing) will fit any of the other clear bottom housing as well? I know the housing is black, but I couldn't find any information on swapping just the bottom portion so I would have both transparent for rgb. (the reason being is the upper clear housing for titan seems more smoother/transparent, than the gateron upper clear).

can i upgrade with optical switches or only normal version? gateron red switches ?

@saschabecker6336

Жыл бұрын

No you can use any mx switch you want

i have roccat vulcal 121 is it the same design under the hood? Having no trouble with my switches but some of them become harder to press than the others. I would like to replace them somehow if possible. Anyone tried this on vulcan 121? many thanks in advance!

@pascalmartin033

8 ай бұрын

hello, I have the vulcan 121 with red switch. I started having problems double tapping with a few keys... for the moment, I don't have the strength to open the case, and unsolder the keys... since I really like this keyboard , I bought a second hand keyboard for 50 euros to have spare parts... From what I know, the switches are soldered to the PCB. So you can't easily remove the switch to clean it... A hazardous solution but one that works (without dismantling everything...): 1) remove the flat surface of the black key 2) take a very very fine flat screwdriver 3) insert the flat of the screwdriver between the transparent plastic and the black frame of the keyboard. either to the left or to the right of the switch 4) pry to uncap the transparent plastic from the outside. You will have access to the spring, to the red piece that goes up and down. Afterwards, lubricate the spring and the red part. If necessary, carefully clean the electrical contact. This is a “normally closed” (NC) contact. When you press the switch, the electrical contact is open... I wasn't reassured about opening a switch from the outside but it works! good luck !

Could you do a tear down of the vulcan pro or the Vulcan tkl pro?

Are the switches the problem with these? I have so many keys that dont even register on mine.. I hate the damn thing

@cac2244

Жыл бұрын

I replaced mine not because of faulty switches but because it was a fun project. If you hate it, do yourself a favor and get a hot swappable Keychron or Glorious.

Are the switches on the 122 aimo removable

@Mr_Feuermaul

3 жыл бұрын

watch the video^^ you cant just pull them out like the keycaps.

How do you remove the original knob?, i have a vulcan and want to swap the knob.

@cac2244

2 жыл бұрын

It is just inserted with pressure...no screw on the original knob, so just put pressure to lift it and it will come out. Just lift straight so you don't damage it in case you want to reuse it.

@Snifshifter

2 жыл бұрын

@@cac2244 Thank you, i thought it was but didn't want to accidentally break it.

Im not getting a single switch out

When making a video about dissasembly. Maybe actuly show jow you do things and not just skip frames where in one frame all keys are on and the next they're all gone without showing how to even take them out

So Cherrymx Brown switches are compatible?

@cac2244

3 жыл бұрын

Yes...

@nikimaiki92

3 жыл бұрын

Thx mate

Why?

Hey, I have a Problem with my vulcan 120 some bottons dont react when I press them just after few klicks ther react do someone think of i chance them like in the Video ist Can solve my Problem? Or someone had the Same Problem?

@Munchakoopass

3 жыл бұрын

Hey, Same problem here. The switches suck big time. My friend had exactly the same problem but was still within warranty so he could send it back. Im stuck with the letter W not working half of the time. Contacted Roccat and their reply was: you can suck a big one. They wont acknowledge that they made a sucky keyboard.

@StrangeRealitiesNStardustWaves

2 жыл бұрын

If you pop the top of the switch shell off, try cleaning the copper contacts with either electrical contact cleaner or 70-99% rubbing alcohol, worked for me when that issue came up

Does this work with the 121 Aimo too?

@saschabecker6336

Жыл бұрын

Works with every Vulcan keyboard as far as I know

@saschabecker6336

Жыл бұрын

Of course if it has mechanical and not optical switches

Roccat = crap. Led's on the keys started failing after a couple of month and they do not give any support.

I feel like this keyboard is trash for the price

I dont know. It looks like you just ruined a great keyboard.

@cac2244

3 жыл бұрын

Then I'm not gonna tell you want I did with my Durgod Nebula TKL today... You'd be upset. 😂

What a waste, reason why you buy that particular keyboard is because its fast and silent.

@cac2244

3 жыл бұрын

I bought this keyboard because I buy all keyboards...