Пікірлер

• 
  @juanguzman473612 күн бұрын

  Thank you! Bought a Pro+ from Ebay, and I didnt know why my batteries werent working. Bought a new battery, didnt help. I ended up seeing videos online and all the batteries were showing bluelights and mine was green. This video helped a bunch! Thank you. You saved me $200+ dollars!

• 
  @OtakuV220 күн бұрын

  Watched the bonus footage, the pad hardly moved and he only uses 50% of the mouse pad surface, yet complain the mouse pad is too small.

• 
  @lifebleeds8629 күн бұрын

  why don't you have a link for the desoldering tool?

• 
  @IronOreAgateАй бұрын

  Thanks for this! I ordered a strip that has 300 aLEDs on it and was annoyed to plug it into my mobo and find that exactly 120 of them seem to work. I had thought it was defective since ASUS says it supports up to 500, but I had a feeling that they might be misleading since it says that it can address up to 500 LEDs, aka control 500 of them, but nothing about how many it could power from the header.

• 
  @ifarotht5149Ай бұрын

  My pwm fan controller makes so much coil noise

• 
  @rzsmoufa89932 ай бұрын

  Don't like the presentation.

• 
  @Matt-oy7pz2 ай бұрын

  I like the Neewer NW 700 kit.. it sounds good, looks good, and you get all the accessories… for just $36

• 
  @qrsimon2 ай бұрын

  Why does the data signal stop, how does that work?

• 
  @qrsimon2 ай бұрын

  So in theory I can use the power from an unused argb port from the motherboard and connect the data(/ground) from the argbfan hub that is controlled with the frontpanel. My bequiet 500fx case controller only supports 30 leds(when all 3 pin ports are used).

• 
  @sashomedia2 ай бұрын

  Informative and useful video. Thank you for making the video!

• 
  @christopher696813 ай бұрын

  Thank you, I was so confused about how to do this before seeing your video.

• 
  @Glivpo3 ай бұрын

  Very nice video 😊

• 
  @sohrkim3 ай бұрын

  Thanks. Good demo

• 
  @koen76483 ай бұрын

  So you press it out and press it in with the top side of the wheel facing up?

• 
  @VaracolacidVesci4 ай бұрын

  Very useless video

• 
  @checas88104 ай бұрын

  Ty realy thanks. im eletrician. and i thinks like u...thermaltake controller its realy stupid. So i started to look on internet for found a diagram cable, but in itlalin language i didnt found nothing. But now i have found u with your fantastic work.. ty man. so i can control my fan with aura sync.. ty very much man. I'm enjoying. P.S. Sorry for my bad english i hope u understand.

• 
  @cac22444 ай бұрын

  Grazie mille per questo fantastico feedback. Sono felice che ti abbia aiutato.

• 
  @WholesomeTyOnlineGambling4 ай бұрын

  Thank you for thye video I will give it a try

• 
  @toddsherman8124 ай бұрын

  I'll be grateful for the rest of my life. Thank you for making this video and for figuring out the pinout - it has truly made my day. I'm working on a similar project and was frustrated by ThermalTake's lack of detailed information when purchasing their fans on Amazon. Your video and contribution have been immensely helpful. I greatly appreciate it and offer a virtual fist bump in gratitude. 🤜🏻💥🤛🏻

• 
  @cannoneermike5 ай бұрын

  I have the exact problem with noise, but the mic I use doesn't have a separate port for power and sound. Is there anything I could do? Would it be possible to have a split cable between a microphone jack for sound and a USB cable for power? Great video by the way

• 
  @cac22445 ай бұрын

  I don't know if you connect your mic to a usb interface or directly to a motherboard/ laptop, but if to an interface, try to put ferrites to the power cable and also try to switch usb cable. If you connect to a desktop motherboard, try to see if it has a usb isolated port for audio, most modern motherboard have such isolated ports.

• 
  @cac22445 ай бұрын

  I got my square belt kit and the best size was diameter 35mm.

• 
  @MIMCKMedia6 ай бұрын

  can you explain what the settings are doing?

• 
  @UnwantedCommentary6 ай бұрын

  I have had my Maxnomic for 7 years it started off hard, but it breaks in after a few months and is amazing after that.

• 
  @thexerox89396 ай бұрын

  Magic how did you get the pcb out since mine seems stuck to the aluminium, you skipped that step

• 
  @thexerox89396 ай бұрын

  I failed to mention you also failed to say the switches were soldered down, so yet another step, it's the same roccat.

• 
  @AB-80X6 ай бұрын

  Honestly just sell it, get the K100 with OPX switches as they are classic hot swappable switches.

• 
  @rileyflex26796 ай бұрын

  can I set different color mode for individual devices with this device? since aura creator allows you to create new lightning effects and my motherboard has only 1 argb header .

• 
  @Letsgobrandon-h7w6 ай бұрын

  where does the pwm cable ?

• 
  @GreatByzantine6 ай бұрын

  Gateron - G Pro 3.0 it will fit?

• 
  @dbzkidkev26 ай бұрын

  Yeah I just finished doing this, took forever on a keychron k6 pro. I had Brown switches with clear housing, so I swapped the housing and it ended up perfect. It sounds excellent and feels amazing, much better than the browns. Using pudding keycaps, lets the light shine right through.

• 
  @pabunaE7 ай бұрын

  Finally!! you saved my life!! thank you so much... It was just that little botton!! I cant believe it... I spent hours of trying to fix it and it was just that!! omg

• 
  @davidperry40137 ай бұрын

  I have the inland lightning. It is firm but, not too hard and is the most comfortable for me. I’ve sat on a maxnomic and feels like the seats on frontier airlines which is a little too firm. The DXRacer king series is close to the sweet spot for me on the bottom cushion and wish the backrest is a little firmer and has a better lumbar system. I like good head, back, tailbone, and pelvis support but not so firm that my butt feels flattened after long sessions.

• 
  @Kalfior977 ай бұрын

  hi, thanks for the video. do you need to deassemble entire keyboard to take out a switch? my shift is getting stuck and i want to remove it and look what needs cleaning so that it moves normally

• 
  @DIGITALNME7 ай бұрын

  Any advice on how to do this to the K100 Air?

• 
  @AB-80X6 ай бұрын

  No. You can't.

• 
  @FreedomIII7 ай бұрын

  Thanks for the guide. I have a Vulvan Pro I wanted to mod a hit and thought it was just the 3 visible screws + the 2 under the flip-up stands and was wondering what was going on. I guess I know why I can't get it apart now 😢

• 
  @warmaxxx7 ай бұрын

  not sure if i should get the pro or 121 tactile

• 
  @philong42607 ай бұрын

  I'm using Roccat 121 AIMO and my keyboard has one switch is broken the switch stem ("plus" thing), it is red switch. Where do i can buy this Roccat switch for replacing?

• 
  @Alex-bm9nb7 ай бұрын

  That's a great idea to connect 2 of them and make it 180 degree adapter haha

• 
  @ChuckNorris1000008 ай бұрын

  Right how do I get 12 ports? I need more 4 more fan port. What do I do?

• 
  @robinthompson68218 ай бұрын

  I would also like to be sure on how many RGB headers I need on the motherboard as you said, you need all 3 cables pluged into the motherboard or just 1 5V header

• 
  @robinthompson68218 ай бұрын

  now that controller on/ there web site say's it can run only 5 fans recommended your running 7 and it still works will it work with 6 tough fans 14 RGB new ones/ I would like to run all 6 on one controller, will that work, and will it show up on the TT RGB plus software also?

• 
  @MB-mq2ve8 ай бұрын

  Could you also just cut the cable (as close to the keyboard as possible) and connect it to a let’s say coiled cable?

• 
  @cac22448 ай бұрын

  Absolutely...sounds like a cool project too...

• 
  @f4bsi8 ай бұрын

  Thanks for this guide, because of wear and tear some of my Roccat Vulcan switches starting failing and this helped massively. Tore down the keyboard and replaced the affected switches and now everything works again. Again much thanks!

• 
  @h4x3_14 күн бұрын

  I have a question: when replacing the switches, did you have to completely disassemble it and solder something as shown in the video?

• 
  @f4bsi14 күн бұрын

  @@h4x3_ yes I had to desoder the old switches. Then I had to get them out from the platine. I replaced them with a new switch and had to resoder the holes I produced before

• 
  @holdfast16908 ай бұрын

  Can you control an inbuilt led light on a pwm fan? My fan has an inbuilt light I’d like to turn on and off

• 
  @ixusus8 ай бұрын

  Where can i buy the roccat titan mechanical switches? Is there a way to buy them?

• 
  @ixusus8 ай бұрын

  Where can i buy the roccat titan mechanical switches? Is there a way to buy them?

• 
  @Granatenman8 ай бұрын

  You can heat the Display on the middle front with a heatgun and lossen the glue, which is only a tape 2-3mm around th edge and than pry it open with a razorblade. thats what i did and it worked. so no breaking any plastic.

• 
  @blessedmom15438 ай бұрын

  Rocat Swarm Function keys not working - specifically the F5, F6, F8 - I can confirm they are set in the app to lower, higher and mute but they do not work. Can someone please help? I hope I am explaining properly =)

• 
  @fernand4749 ай бұрын

  thx

• 
  @JehuMcSpooran9 ай бұрын

  Looks like they revised the PCB in the V2 from the V1. I have the v! and have a horrible ground loop buzz when using usb so it's basically useless. I never found a fix for it.

• 
  @MiIIiIIion9 ай бұрын

  So just to make sure I'm right about this: The PWM control in a standard PWM PC fan is done inside the fan using a 0-5V control signal from the motherboard? So you can bypass the need for that control signal by just providing power that has already been "PWM'd"? And you can effectively control 3-pin fans with PWM if you have an external PWM controller like the one you're using? I've tried googling (and bing-ing and DDG-ing) these questions, but every obvious result on all services is about controlling PC fans in a PC, not outside.

• 
  @forrestorange9 ай бұрын

  If there are fanboys here, I'll just state that 10 of my switches died after 3.5 years of moderate use. Talking to Roccat's support got me nothing but a 15% discount on new Roccat products. They don't even want to send me replacement switches. Absolutely disgusting. So if anyone is thinking of buying this keyboard brand new - DON'T.