what happened to the links you promised at beginning of the video?? I wanted to see how you took the deck out. Bummer!

@SevenFortyOne

5 жыл бұрын

I lost the footage I had and meant to re-shoot but forgot all about it...sorry about that...

@USMC-Sniper-0137

4 жыл бұрын

kzread.info/dash/bejne/hpOCm9OrlZfeoZc.html

@USMC-Sniper-0137

4 жыл бұрын

@@SevenFortyOne I posted this video over on Dennis's site so you're even LOL....

I expect this mower will last several seasons with decent care. kzread.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

Excellent video! I was helping a friend put his deck back on and this was just what I needed. Thanks

Very informative without a lot of unnecessary stuff. Really Nice.

@SevenFortyOne

4 жыл бұрын

Thank you!

Thanks 😊 very helpful video. This is my second season with my Husqvarna TS 146XD. It came with the mower deck installed. I removed it and installed a front blade for winter. I wasn't sure 😕 I could put that deck back on....so thank you very much for taking the time and effort to make a video and post it.

@SevenFortyOne

3 жыл бұрын

Glad this helped!

Thanks for this video. No doubt I'll need to do it again when I replace my blades (very soon). This video was very handy and easy to follow. The whole process was a lot easier than I thought it would be. Thanks again. 🙏👍🙏

Thank you so much for your instructional video. I have a zero radius and really believe your instructions are going to help me take it spare and put it back!!!😜

Thanks, just in time for Spring!

Normally I don’t comment but I will say thank you very helpful

Appreciate the reassembly help

Very helpful and nicely done. Thank you!

awesome video. Thank you for posting this.

Thanks for the awesome video! This helped me change out my rusty deck with a good one 😀

I have a LGT48DXL and I venture to say the processes your showing on yours will work for me as well. Thanks.

Thanks, sorry was looking for a clutch didn't know that model didn't need one nice informative vid

You're a lifesaver and I mean it my friend needs her yard mowed and I have it installed her deck mowing deck in about 6 months and forgot how thanks again and I mean it

@SevenFortyOne

2 жыл бұрын

I'm glad this helped! Thanks for letting me know

Great work Job. Thanks for the informative video 👍

Great video👍 Thanks mate!

Thanks for the video.

wow, you make it look easy

@josephinemiller5005

4 жыл бұрын

You didn't replace the anti sway bar in the back. I am having trouble keeping it on my deck and you didn't even put it on.

@SevenFortyOne

4 жыл бұрын

What? I put everything on that came off. Do you have a different mower?

Thank you.

I had one of my deck hangers break off, looked at your deck just to see what it was. 4-5 years old. My last mower lasted 20+ years.

@SevenFortyOne

5 жыл бұрын

Mine broke too.. had to have it welded. They don't make stuff like they used to....

Great video

This is the man

Thx bro.....

Thanks sir

thank you

Same exact thing happened to my mower, those parts broke off and had to have those parts welded on as well!

@USMC-Sniper-0137

4 жыл бұрын

I hate this robotic welding system!!!!!!!!! The welds aren't as wide and as hot as they should be.

Thank you. Definitely will help me.

thanks for posting this, it was super helpful. what about the clutch cable though? i got the deck on but my mower deck won’t engage. it’s a manual clutch. i have a 1942 model, but basically everything was the same as your video

I've accidently hit a pile of soil with probably one of the blades. It doesn't show on it but I sense a slight vibration now as I engage the blades. Should I remove the deck and inspect? Which parts of the deck should I inspect? Is it normal that one of the blades, while the mower is turned of is more difficult to turn than the other?

@SevenFortyOne

4 жыл бұрын

You may have damaged one of the pulley assemblies. Take the deck and belts off and check for damage to them. Also check to make sure you didn't bend your blade

we have the same mower and we have issues with deck height adjustment, at its highest setting it still is scalping our yard, any videos on adjusting the height ?

Does your left front wheel ever binds/rubs when turning on the deck edge? Thanks

@SevenFortyOne

3 күн бұрын

No

What is that front rod called?

i was wondering how do u install the mower deck with the pulley bracket so close to the ground on that tractor or do have to take the pulley bracket off

@SevenFortyOne

Жыл бұрын

You should watch the video, I show how I installed the deck here

@johnstratton5637

Жыл бұрын

i need it for this tractor TS354XD HUSQVARNA LAWN MOWER 24 HP KAWASAKI 54 INCH DECK

@SevenFortyOne

Жыл бұрын

You'll have to search for instructions on that tractor, mine is different

This video was so helpful. We have a 22v46, this worked just fine with it. My only question is: how do you get those darn cotter pins off and on so easily ?? lol

@SevenFortyOne

2 жыл бұрын

Glad this helped!

@NextChapter111

Жыл бұрын

I used a screw driver to leverage them off.

Quick Question what if your deck on the left side is higher than the right side... ... how do you level both end..my left side is about 3 3/4 inch and my right side is about 2 1/2... please help... thanks

@SevenFortyOne

2 жыл бұрын

Hard to say without seeing it myself. There are usually adjustments but yours might be hooked up wrong if it's off more than an inch. Sorry I can't help more

@saahilshah9455

2 жыл бұрын

@@SevenFortyOne it wasnt hooked up wrong i think it possibly a couple of things on the ground like the root or someting.. and hence it got lop sided.

I need to adjust the mower blade height. Because even when I have it on 6 its still cutting too low, could you show me how to fix the height adjustment please

@thomasfletcher2645

2 жыл бұрын

Adjustment bolts/nuts are on backside 2 braces

I wonder what the difference is between your 2246LS and my YTH22v46. You deck has 5 wheels when mine has one on each end rear. You have one at each corner and one in the middle front where the front hanger goes. Maybe my front middle wheel is missing but I don't see a purpose unless it's to guide the deck over hard ledges like a concrete sidewalk or driveway.

@USMC-Sniper-0137

4 жыл бұрын

OK, and use the T-30 or the most common shop tool call a ratchet and a 3/8 " socket LOL

@lindaferrante5576

3 жыл бұрын

I would like to know why when u put the brake bracket on on the left side u didn’t video it it was off I saw the holes in deck where spring went

@SevenFortyOne

3 жыл бұрын

@@lindaferrante5576 Sorry - I don't understand what you mean. Which bracket are you asking about? Can you point to a time in the video?

@lindaferrante5576

3 жыл бұрын

SevenFortyOne at 0:25 u will see the holes in the deck where the brake bracket goes with the spring

@lindaferrante5576

3 жыл бұрын

It’s on the left side the brake

Seems the welds of the bracket breaking is a common problem on the husqvarna.

Thanks, but how do you activate the blades, seems i didn't see that being connected, was it? Thumps-up

@SevenFortyOne

2 жыл бұрын

The belt drives the blades which are turned on and off through a control on the dashboard.

@phillipramsey6926

2 жыл бұрын

@@SevenFortyOne no switch that is connected to the deck or the blades The deck was put under and connected to the mower, where is it connected to the blades Is it done with Wi-Di, or is it hard wired?

@SevenFortyOne

2 жыл бұрын

The switch controls the drive pulley on the engine which drives the deck so no connection between the switch and deck is needed. Check the owners manual for your tractor for more info...

Good info Rob, isn't that the deck the dealer was way over priced on the repair?

@SevenFortyOne

5 жыл бұрын

Yep...same deck

@craigwickwire3908

2 жыл бұрын

@@SevenFortyOne Hi 741, did you take the blade breaks off the deck? Mine is in the way of the belt and it is eating it up because it is set too far out when engaged.

I wish you had shown re attaching the clutch cable to the deck.. oh , and couldn't get to link on removal of deck.

@SevenFortyOne

2 жыл бұрын

Mine doesn't have a clutch cable. I'll fix the link later when I can get to a pc

Replace mower belt on ts342

any1 know the part number for the rod @5:12 ?

what does Husqvarna mean?

@SevenFortyOne

4 жыл бұрын

?

Take off your non adjustable hanger and replacement with an adjustable hanger your left side is coming up higher than your right side I don't know why Husqvarna couldn't put 2 adjustable hangers order yourself an adjustable hanger and your deck will appreciate you

What about the engagement cable 🥴

@Squad-pl7oo

Жыл бұрын

Robert he don't need a engagement cable he engage his blades electrically with his pto clutch pull to engage push to disengage

You shouldn't need the diagram. It's only 4 pulleys on that deck. That makes belt routing pretty straight forward.

Nice video, but the video needed to be 21 seconds longer. Then it would be 7 minutes and 41 seconds long. 😂

@SevenFortyOne

5 жыл бұрын

I noticed that too....then I started thinking maybe I should make all of my videos 7:41 long....

whoever welded that is also not a very good welder 😅

@SevenFortyOne

2 ай бұрын

It's better than I could do...and it's still holding so that's all I really care about

Great video