This helped me so much. I got drunk and took it apart and sobered up and couldnt figure out what I did to take it apart. I'm back mowing again! Thanks

@JohnsonsSmallEngines

3 ай бұрын

I’m glad you figured it out with a little help! Thank you for sharing and the kind comment.

Awesome instructional video... simple, straightforward, no bs procedure!!!

@JohnsonsSmallEngines

Ай бұрын

I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching.

Thank you for such a great video! The camera work was perfect. I could see everything clearly. My husband broke a spindle and was going to pay some one good money to fix but after watching your video I knew I could do it myself. You saved us a lot of money but just as importantly, the underside of the mower is no longer a mystery.

@JohnsonsSmallEngines

2 жыл бұрын

Hi Nancy, I’m glad this video helped you learn and save $. Thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)

Thank you 😊! I removed the deck 8 months ago and forgot where things were connected. Thought I was going to have to call in the pros, but your (pro) video saved the day! Nice job! 👌

@JohnsonsSmallEngines

2 жыл бұрын

I’m glad it was helpful. Thank you for watching and the kind comment. Please give this video a thumbs up to help my channel. It would be greatly appreciated.

@JazmynnJones

Жыл бұрын

Same😂 I took it apart last fall, and forgot where that black stabling bar was from!

I had to drop my deck to replace the idler pulleys. Reattaching the deck I was standing there with the stabilizer bar scratching my head trying to remember where it goes. After a few minutes of not figuring it out it's off to KZread I go. Your video was the first in the list that look liked it applied to my situation. Sure enough you pointed me in the right direction. Awesome!!! 👍

@JohnsonsSmallEngines

Жыл бұрын

Hi Mike, I’m glad you found my video and it helped! Thank you for watching and commenting. Please give this a like “thumbs up ” to help my channel! It would be greatly appreciated! Tell your friends:)

@gone2dmtns

Жыл бұрын

@@JohnsonsSmallEngines Already done my friend.

Thank you for sharing this really useful video. You just saved me a load of head scratching over the very unclear manual. Thank you again for your generosity of time in making this very clear video . I have liked and subscribed.

@JohnsonsSmallEngines

2 жыл бұрын

Hi Stuart, I’m glad it was helpful and thank you for supporting my channel. It is greatly appreciated :)

Thanks for the help. Last year I had an extra clip from my mower and thanks to your video I now know where it belongs.👍

@JohnsonsSmallEngines

Жыл бұрын

I'm glad it was helpful! Thank you for watching and the kind comment.

I have watched 10-15 videos on how to remove the deck on the 24V48 and yours is the best. It's the only one that clearly shows how the anti-sway bar is attached to the frame. Thank you

@JohnsonsSmallEngines

3 жыл бұрын

I’m glad the video was helpful.

Awesome vid. No farting around, ya just get it done and explain clearly along the way. Thank you!

@JohnsonsSmallEngines

Жыл бұрын

Your welcome! Please give this video a like to help the channel. It would be much appreciated! Thank you for watching.

thought this would be harder than it was. thank you brother 🙏

@JohnsonsSmallEngines

2 ай бұрын

I’m glad it was helpful and thank you for the kind comment.

Thank you, we will be taking the deck off today so that it fits in the back of my truck

Excellent instructions! Thank you.

@JohnsonsSmallEngines

4 ай бұрын

I’m glad it was helpful! Thank you for the kind comment. Please give this video a like and share my channel to help it grow.

saved the day! great, to-the-point video!

@JohnsonsSmallEngines

3 жыл бұрын

Glad it helped! Thank you for watching and commenting :)

Great job thank you....been hesitant about dropping the deck.👍👍

@JohnsonsSmallEngines

Жыл бұрын

I’m glad it was helpful and thank you for the kind comment. Please give this video a like and tell your friends about the channel to help it grow! Thank you for watching:)

Awesome job! Thanks for the help.

@JohnsonsSmallEngines

2 жыл бұрын

Your welcome! I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)

Perfect! This will help a ton!

I know this video is a little old but thanks your instructions also work on the 54in deck

@JohnsonsSmallEngines

Жыл бұрын

Hi Jeffrey, I’m glad it was helpful! Thank you for watching and the heads up it worked with the 54” deck. Please give this a like and share the channel with your friends to help the channel grow.! It would be greatly appreciated:)

Thanks u was a big help

@JohnsonsSmallEngines

Жыл бұрын

Hi Kevin, I'm glad it was helpful and thank you for the kind comment. Please give this a like, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated! Thank you for watching :)

i had an extra butterfly clip left over, but saw where it went from you video. the front skinny bar. I didn't remember taking that one off. the one you said was a jack knife potential.

Awesome video. Thank you

@JohnsonsSmallEngines

7 ай бұрын

I’m glad it was helpful! Thank you for watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!

Sir that was a very nice video short and to the point keep it up. M.Atkins

@JohnsonsSmallEngines

3 жыл бұрын

Thank you! I’m glad it was helpful. Will do :)

Great job thank you

@JohnsonsSmallEngines

10 күн бұрын

I'm glad it was helpful and thank you for the kind comment!

Thank you brother man!

@JohnsonsSmallEngines

7 ай бұрын

I’m glad I was able to help! Thank you for watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!

Great video. Thanks.

@JohnsonsSmallEngines

2 ай бұрын

I’m glad it was helpful and thank you for the kind words!

You and the video are awesome.

@JohnsonsSmallEngines

10 ай бұрын

I’m glad it was helpful and thank you for the very kind comment!

Very very helpful

Great video. You actually show (in focus) all the connections. Any chance of doing a video showing the connection of the snow blower attachment to this model?

@JohnsonsSmallEngines

2 жыл бұрын

Thank you, I’m glad this video was helpful, Please give this a thumbs up, subscribe and tell your friends to help my channel grow. I do not get into installing snow blowers or blades on tractors like your because there are to hard on the machine. Meaning, I’m my opinion, you are gonna greatly lower the life of the tractor by installing a plow or blower on the front of your machine.

Very helpful.

@JohnsonsSmallEngines

2 жыл бұрын

Glad it was helpful! Please give this video a like, subscribe and tell your friends to help my channel grow. It would be appreciated! Thank you for watching and commenting.

Nice video, well my the belt in the top is loose but also the handle that controls the levels ,I dont know what going on i try to adjust the nut in the back and the nut to adjust and still loose. I move up and down the handle . I am talking about the part between the frame and the tire the one it has the safety pin like a butterfly' to adjust level. thank you

Great video, shows everything perfectly, should be something i can do instead of taking it to mechanic

Perfect video

@JohnsonsSmallEngines

2 жыл бұрын

Thank you. I’m glad it was helpful.

I have this exact tractor but I don't have that tensioning bar he points out in the beginning. Ill have to see if it's placed elsewhere.

@JohnsonsSmallEngines

2 жыл бұрын

You most likely do not have it. Many different models of this tractor.

Nice man Just subscribed

@JohnsonsSmallEngines

8 ай бұрын

I’m glad it was helpful and thank you for supporting the channel!

Are there any pulleys that need greased, I want to remove the deck and grease pulleys if they are required. Thank you.

@JohnsonsSmallEngines

3 жыл бұрын

If you have any grease fittings to grease they will be on the top of the blade shafts. Some had them and some did not. If you have them you should be able to grease them without taking the mower deck off. Yes it will be easier to take the deck off to grease them but you do not have too.

You da man.

@JohnsonsSmallEngines

3 ай бұрын

I'm glad it was helpful!

is it any different for a yth24k48 and why a 24k 48 24v48 and other 24 48s?

@JohnsonsSmallEngines

2 жыл бұрын

Not sure if there is any difference in the mower decks but I’m pretty sure the 24v48 has a Briggs and Stratton engine and your 24k48 should have a Kohler engine.

I can’t figure out how to put my My tension bar back on.It came off after someone sharpened my blades

Sweet.

@JohnsonsSmallEngines

2 жыл бұрын

Thank you for watching!

That piece that connects to the front I can’t get the nut all the way on for the life of me, the little chrome bar that connects to front of mower deck, other than that everything is working fine any suggestions? The one with the bowl shaped washer, you pushed it out after disconnecting it from deck but I had it serviced at a shop and they took the nut off and left it on the mower deck and I cannot get it back on

@JohnsonsSmallEngines

2 жыл бұрын

I guess the question is why did they give you that nut back. How was the front of the mower deck staying up? after getting machine back from the shop. They are most of the time locking nuts and very difficult to get on and off sometimes. Are use PB blaster and that helps and sometimes I put the entire bar in a voice and use either an impact gun or a Closed and wrench with a pipe for leverage. It could also be stripped and you will need to buy a new deck stabilizer bar and nut.

@waterwhippin5289

2 жыл бұрын

@@JohnsonsSmallEngines they put a snowblower on it last fall and I was just putting the mower deck back on in spring, I don’t see why they did it the way they did your way looks much better.

I have the same machine. Am about to order another belt. Can I install the belt without taking the deck off?

@JohnsonsSmallEngines

2 жыл бұрын

Not sure, I always take the deck off because it’s just very difficult to work in and around the pulleys. If you attempt it, let me know how you made out.

What would happen if the back rod was left out?

Trying to put my deck back together and I cannot get the front rod (the one you mentioned to remove to keep from getting bent) to reach/fit back to where it goes - it’s about 1/4 inch too short. If I put it back first, the mid deck connection does not fit where it needs to go. Any suggestions?

@JohnsonsSmallEngines

Жыл бұрын

Make sure the mower deck height adjustment lever is in the lowest setting. Leave the front rod connected then you will need to lift up the front of the mower deck on the side of the mower your trying to get the center arms attached to the frame. You will see that by lifting the front side of the mower deck it should let you put the center arm on. You need to be trying to put the center arm on when you are lift the front of the mower deck. I use a long pry bar under the front side of mower deck for leverage lifting it up. I hope you can understand this and it helps.

@susansays9158

Жыл бұрын

This worked. Thank you so much!

@JohnsonsSmallEngines

Жыл бұрын

Glad to hear!!

Anyone have any experience putting one of these 48” decks in a husqvarna LGT2554?

I want to use the machine as a yard tractor is there anything more that needs to be removed or modified to leave deck off and use machine

@JohnsonsSmallEngines

Жыл бұрын

If your machine is the same as this video? Remove the 3 deck hangers from the machine and the one anti sway bar and you be good.

@user-kk1bg8tu9h

Жыл бұрын

​@@JohnsonsSmallEngines Thank you

At 3:10 did you say hands? Just kidding... Great video it really helped me a lot.

@JohnsonsSmallEngines

2 жыл бұрын

LOL!! I’m glad it was helpful::)

You would think that an engineer could design a quick release/attach deck. The Snappers may be the easiest.

I had trouble finding a video for this mower, but the one I had bought from someone had the tension belt loosened completely taken off! I can’t find any other way to loosen this without breaking the belt, I need a little more help

@JohnsonsSmallEngines

2 жыл бұрын

Does your mower deck have the lever that you pull away from the mower to loosen the belt? How do you engage the mower deck? A switch or a engagement lever?

@ssamhg

2 жыл бұрын

@@JohnsonsSmallEngines I can’t loosen the belt is what I’m saying, the lever isn’t there. The mower deck is engaged with a switch/button that you can pull in or out

@JohnsonsSmallEngines

2 жыл бұрын

I would say that somebody rigged it with the incorrect belt. And if the handle is missing and it was there before? Or if it has been taken off you will need to put a new one on. There should be spring tension holding that belt on and it sounds like somebody rigged it so tight that you will need to try to figure it out.

@ssamhg

2 жыл бұрын

@@JohnsonsSmallEngines yeah I was thinking that someone might have done that. Thanks for your help!

Damn do you think they have enough damn part

U didn't show cable disconnection...

@JohnsonsSmallEngines

3 жыл бұрын

This model has an electric PTO and does not have a cable to disconnect. Your mower deck must be have a manual PTO.