RideDog GPS Security Polaris Install
Автокөліктер мен көлік құралдары
Get 10% off with Promotion Code "brian10" @ → www.ridedog.com/?via=briansmo...
WHY?... This → • Smuggling Stolen Cars ...
& → • Tracking stolen cars: ...
4 principles to a good discrete reliable installation.
RideDog GPS Security Polaris Install on a Ranger 1000 using the pulse bar system.
Link for a Pulse Bar you can mount on any vehicle → amzn.to/3PUB7Wc
Pulse Bar plugs for all else you want to wire up → amzn.to/3PUkFVT
Wire Harness for Lights to P.B. plug'n play → amzn.to/3VQBTHt
USB outlet plug'n play to Pulse Bar! → amzn.to/43TsSzp
Пікірлер: 16
I'm back! I'm healed up from surgery and posting again. Love to hear from you in the comments. What do you want to see videos on? What are you working on? LMK
@gaveintothedarkness
Ай бұрын
Welcome back Brian!
@SeanBZA
Ай бұрын
Anything you want to post is good, glad you are up and around again.
Just wanted to say: good seeing you, Brian. And thank you for all of your insight over the years.
Where have I been? I didn’t realize you had surgery Glad you’re back
You always explain everything very well. I trust all is well with you and your family.
@briansmobile1
Ай бұрын
We're all good man- thanks!
Keep at it Brian and keep schooling us 🎉
Good to have you back, one advice is to cover the receiver in black tape so even if someone is looking for it doesn't see it and GPS will still work
Ohhh, the Vikings alive 😆
@briansmobile1
Ай бұрын
Alive and kicking! XD
@Wil_Liam1
Ай бұрын
@briansmobile1 Glad to hear that me brother by another mother..
Good to see ya. That is a handy item, much better than those air trackers.
Great video demo
Tip for wiring looms is to get a roll of the same loom tape, fabric or PVC, and pop the loom free from the clips, and tape the new one to it with matching tape and lay. That way nobody will be able to see you actually added anything, as it matches the factory loom, only slightly thicker and possibly cleaner. Did that installing an aftermarket immobiliser, and a few months later the car went to a body shop. They pushed it in and out of storage every day for the 2 weeks, because they could not find out how to disarm it, even with an auto electrician there. It came with 2m of wire, so I used all 2m to tape it to the existing loom under the dash, all the way to the passenger side kick panel, and up into the A pillar base, where it was stuck down above the existing relay and fuse module up high into the pillar.
@briansmobile1
Ай бұрын
There's the proof!