Awesome job on reviewing this excavator, keep it up!

Great review I have the same with only 6 hours and I have dug out 6 trees with it and I’m happy Thanks

thanks for these man!

Ta mate. Good to have some input before looking.

Got one . For the price its really good 👍

Sebastian: Glad you got the wheel motor seal leaks fixed. Hope you add pressure filtration for the hyd oil. I see you bent the boom cylinder hardlines. I reversed this cylinder so the hose connections are between the cylinder and the boom and much better protected. Also, the pivot point on the ROPS is correct and works well, in my experience, folding forward.

@Zzz-yk4fz

2 жыл бұрын

Tradutor gogle

Keep me updated mate

Your a legend for putting these up mate. Iv got the XN10 model and the Chang chai motor in it hand grenade on me so the dealer put a Koop motor on it. Well I put it in and he gave it to me for half price. I just did a track seal and your video has saved me, I know exactly what size seal to get for it now. My feed back is check all your bolts often. Especially on your slew motor. I blew the o ring on it cos surprise surprise half the bolts were finger tight. Blew the o ring on the post hole digger that come with it, same problem, loose bolts. Never had electrical issues surprisingly. It’s a great machine for its size! Parts are cheap and it’s not scary to work on like other brands.

@Ful-OGold

2 жыл бұрын

Ps one of track motors is being a pain in the ass to seal. Iv thrown 3 seals on it and can’t get it to seal !

Just sold a new XN 0.8 machine and ignition was stuck contacted Lucy at the factory and she sent one air freight. Their bigger machines are very good and the quality is on par with the over priced Yanmar, Kubota etc.at a very reasonable price. All quality components. We had four XN 1.5 in our hire fleet one left we sell them into the second hand market afterwards all done murderous 1000 hours and no problems. Only bucket pins and bushes at about 500 hours. The brand name bushes and pins also only last that long and cost and arm and a leg. We have sold this year 3 XN 1.5, 3 XN 2, 1 XN 1.8, 1 XN 8-E and XN 0.8 all our customers are totally happy.

@jimmylove7760

3 жыл бұрын

Hello, I've just found out about these and i see your comment. I'm in Germany and i admit youf the first person I've contacted regarding this subject but I'm a big of a geek so ilk be be watching everything. I may be interest in a second hand machine. Pls would you give me a direct e-mail account.

@Ful-OGold

2 жыл бұрын

My xn10 motor ran away on me on a lousy 100 hours. It leaked like a sieve from the decompression lever. Smoked like hell for a while before it ran away on me. At one job the fumes were so bad I got smoked and chucked my guts up. That was a Chang chai engine. Put a koop engine in and it’s much better.

Thanks for the review. Can you provide the link to where you bought it from? I’m afraid of getting scammed by buying it from the wrong place.

Hi Sebastian wondered if you could help please. I have damaged a hose for the boom cylinder so need to replace it. Just stripped the machine down to get to the hose and thought while it was stripped down I would replace the hydraulic filter before topping it back up. I can't seem to see where the hydraulic filter is, can you help? thank you

Would you purchase this same brand again? I’m looking to purchase a Chinese mini digger. Haven’t decided which model to get. I’d appreciate any input /tips. Tia

Will you do 2 year review

Can u make a longer review on it

Hi all can anyone help I am wanting to drain and change the hydraulic oil but can't seem to see where to drain, the tank, fill it up or where the filter is ( engine oil was simple but lost on the hydraulic system). thank you Keith

Hello please can anyone tell me the lengths of the hydraulic hoses on the xn08. It’s not in the manual and I need to replace some with the correct length. Someone has replaced them in the past with some that are way too long.. also please can you confirm what fittings are on the hydraulic hoses… thanks!

Where can I find the hour counter please?

Need more videos seb

Had our one run out of diesel. Managed to get the diesel line cleared and running again sweetly. However hydraulics worked for 2 mins and now nothing. Still plenty of hydraulic fluid. Slowly trying to figure out issues. Anyone else had this problem? Or know what it might be?

Hi, I'm in the market for one of those. Here in Sweden they cost 1/3 of one Branson. So you mean you can recommend it? Thank you!

Where did you buy parts? Greets

hi, my XN08 run out of diesel, now it does not start anymore, any hint how to take the air out?

Please can you do a video on chaging / re-mounting a track. It took me 2 hours.

@65wldstln

3 жыл бұрын

On mine I pick up one side with a bucket an the blade down lifting machine onto one track. Put one side on the sprocket. And use a 3 ft bar to pull the teeth of the track over the travel wheel. While pulling advance the the track with machine and boom track on. Reverse that to get it off. Hope this helps.

@binmanblog

2 жыл бұрын

Re-mounting track is now down to 5 minutes with a 5 foot bar. The trick is to coax the slave wheel back in as you pull against the track. Having an wxtra someone on the machine is a must

Is it still alive

blue loctite the nut n knobs m8.

can you show detail about it for me?I interest it and will buy.

@ragnarmarnikulasson3626

3 жыл бұрын

you can find details on alibaba.com

Any new update on this? I mean after s-o much Time dose it still work?

Help!!! I ca t find the battery

Where is the beat place to buy these? I've looked online with them direct and the website looks very dodgy and I don't know whether to trust it?

@binmanblog

2 жыл бұрын

WS Power online - Good communication and support.

any idea wot the arm can lift with a log grabber on it

@Ful-OGold

2 жыл бұрын

I’d say around 200kg at full extension.

Can you move the tracks in to fit through doorways?

@ragnarmarnikulasson3626

3 жыл бұрын

not on this version, I think xn20 can though

@ragnarmarnikulasson3626

3 жыл бұрын

4 - 5 times more expensive though

@binmanblog

3 жыл бұрын

No

I tried the way you fixed the track motor seal and it did not work ! Iv tried 4 seals and the bitch won’t hold oil!

You sound a little less enthusiastic this time around mate lol

hydraulic elbow broke, and i cant find the right size , i guess they don't use standard size for America

Mine has just done 160 hours, no problems until today, it threw a track. I have to try and find a tutorial on how to get the track back on. Can anyone help?

@binmanblog

2 жыл бұрын

The tracks are held under tension with a large spring which can be slackened through square hole half way along. It is easier to use a 5 foot steel bar and lever the track back on slave wheel.

@flmulcahy

2 жыл бұрын

@@binmanblog hi there Steve. It was a battle but with help I got it on. The secret is to put it on the front idler first then wind it on with the drive with a bar and swear words. Two man job. The most important tool is the swear words.

I met the 1.8t version of this the other day at a training place to renew my VOC. Oh boy, stalling out, has a governed speed rather than a throttle (no control), no pilot controls, (but I never even got to try anyway). I saw the $10 electric fuel pump and the pathetic no name hydraulic pump with the coupler thats bigger than the pump. Stalling, wasn't sure why and wasn't given enough time to have a proper look, Sad pile of Chinese scrap metal with 180hrs. Not really much cheaper at the end of the day after all the extra no doubt, unadvertised costs to import to Australia $18,000 AU.

is engine diesel ?

@ragnarmarnikulasson3626

3 жыл бұрын

yes

@binmanblog

3 жыл бұрын

Confirmed diesel

Need to step a bit closer to the mike. Your audio is pretty low.

2 year review please seb or is she dead

Probably still cheaper than a track on a CAT lol

Ngomong opo lek"...