Replacing The Grips On A 2015 BMW S1000RR With Heated Grips

Replacing the stock worn grips on my 2015 BMW S1000RR with heated grips.
You need a sharp blade, T55 Torx head, hairspray and the replacement grips.
The throttle side really was a pain in the rear but the clutch side was a 5 minute job.
Overall, I would not be as scared as I was to do this myself in future. Beats paying BMW to replace the entire assembly.
Replacement grips used:
www.ebay.com.au/itm/Replaceme...

Пікірлер: 23

  • @mmaaddict78
    @mmaaddict78 Жыл бұрын

    Any time you have to deal with strong adhesive, a bit of isopropyl works wonders to loosen it.

  • @sick_s1k
    @sick_s1k29 күн бұрын

    I just bought a premium 2016 bmw s1000rr and the right heated grip doesn’t (work) doesn’t heat up at all. Mine looks exactly like yours except i don’t have a RR on the side of the tank. Im about to change its whole look tho, its gonna look M1000ish

  • @ferzavher
    @ferzavher3 жыл бұрын

    Hello friend, thanks for the video. Is the handle on the right side (throttle) lacquered? Installation the same as on the left side? Greetings

  • @danivaareoff

    @danivaareoff

    3 жыл бұрын

    Hi, yes. It’s installed the same. Just clean up the bar as much as possible before putting it on.

  • @ferzavher

    @ferzavher

    3 жыл бұрын

    cool bro, the hand warmer stays, or is it lost?

  • @danivaareoff

    @danivaareoff

    3 жыл бұрын

    @@ferzavher the heated grips still work if that’s what you mean. Just be careful not to cut the wires out heating elements.

  • @mechveteran01
    @mechveteran012 жыл бұрын

    Thanks for the video (still watching it)! Getting ready to do this on my '14 HP4. Is yours an HP4 race? I'm asking because of the carbon fiber frame

  • @danivaareoff

    @danivaareoff

    2 жыл бұрын

    I wish! It’s just an S1000RR unfortunately. They are carbon frame covers. Hope the video helps!

  • @PrestonIV

    @PrestonIV

    Жыл бұрын

    You and I have the same exact bike even down to the quad lock. Only difference is mine is a 2016 and my quad lock has the wireless charging. Our bikes are pretty much an HP4 without the 3D sensor on the front end and the number plate stating what number in production the bike is. Thanks for the vid as I'm preparing to replace my grips along with doing the big service myself.

  • @quadmeister

    @quadmeister

    4 ай бұрын

    @@PrestonIV no hp4 is different! Engine is also different by some changes etc etc

  • @johnparton2050
    @johnparton20502 жыл бұрын

    Should of put heated gtips on make them softer

  • @KOVROL
    @KOVROL Жыл бұрын

    I just bought a new original BMW heated left grip for 50euro :D why would I get an aftermarket for 50AUD? Thats makes no sense

  • @pruthivirajan7379
    @pruthivirajan73793 жыл бұрын

    Hey mate, could you post the eBay listing link. I reckon it's time to change mine as well.

  • @danivaareoff

    @danivaareoff

    3 жыл бұрын

    Sure. Added a link to the description.

  • @pruthivirajan7379

    @pruthivirajan7379

    3 жыл бұрын

    @@danivaareoff Cheers mate.

  • @SOLDIEROFYAWEH
    @SOLDIEROFYAWEH2 жыл бұрын

    Why hairspray?

  • @SedatedandRestrained

    @SedatedandRestrained

    Жыл бұрын

    It acts as a lubricant to help slide the grip on and then turns into an adhesive once it cures to hold the grip in place

  • @john6276

    @john6276

    7 ай бұрын

    Use black spray paint. Hairspray doesn't work

  • @SOLDIEROFYAWEH

    @SOLDIEROFYAWEH

    7 ай бұрын

    @@john6276 i used soapy water worked great

  • @danishzaman9320
    @danishzaman93203 жыл бұрын

    I broke the heating element on mine...live n learn 🤦‍♂️

  • @danivaareoff

    @danivaareoff

    3 жыл бұрын

    Oh no! That’s a shame.

  • @norzarifzainalabidin6205

    @norzarifzainalabidin6205

    Жыл бұрын

    What happened after u broke the heating?

  • @danishzaman9320

    @danishzaman9320

    Жыл бұрын

    @@norzarifzainalabidin6205 heating element stopped working