strangley satisfying to watch , found your video while researching sand blasting

@Mobileblaster

9 ай бұрын

😊 glad your enjoying them 😊

Great job Mate

@Mobileblaster

Жыл бұрын

thanks pal appreciate it

Good work. A fire accident occur next to brick wall. Would sand blasting clean burned brick? Thank you.

@Mobileblaster

11 күн бұрын

Yes 👌 👍

How exactly are you preventing lead paint from contaminating the ground.

@Mobileblaster

3 ай бұрын

By not putting lead paint on the floor 🤔 why would I bring lead paint and chuck that on the floor?

Will sandblasting get rid of efflorescence?

@Mobileblaster

Жыл бұрын

Yes and no simple answer is yes it will remove it but if the problem remains as to why it came in the 1st place it will come back ie salts in the brick weep out due to water ingress so you would need to fix this before any attempts made to remove the final white cream ish stuff 👍

how long did one side take (not sped up)

@Mobileblaster

2 ай бұрын

Sorry I cannot remember I've slept since this 😂👌👍

What machine is this x

@Mobileblaster

Жыл бұрын

It's a pressure sandblasting pot with 260cfm of air 👍

I viewed a Victorian house and the whole side of the house and flat roof two storey extension has paint on it... Not sure what kind. I imagine this would cost a fortune to remove, if it could be removed at all?

@Mobileblaster

5 ай бұрын

For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick

Do you cover Northumberland

@Mobileblaster

Ай бұрын

No sorry

where Can I find to buy or rent?

@Mobileblaster

3 жыл бұрын

depending your location i could possibly advise

@caleb2791

2 жыл бұрын

@@Mobileblaster what type of medie do you use on red brick?

@Mobileblaster

2 жыл бұрын

@@caleb2791 super fine crushed glass bit like talc powder similar to soda without the expense 😂👌

@caleb2791

2 жыл бұрын

@@Mobileblaster do you ever leave pitting in the bricks?

@Mobileblaster

2 жыл бұрын

@@caleb2791 that's all down to the brick most jobs no although it is abrasive it will remove a microscopic layer off the face

How do you do interior walls rhat are furnished inhabited homes ?

@Mobileblaster

2 жыл бұрын

Get good at masking up haha

@jdaspects

2 жыл бұрын

@@Mobileblaster na, takes more than that... need crazy vacuum system

@jdaspects

2 жыл бұрын

@@Mobileblaster if the masking breaks loose going to be heaps of problems with dust infiltration through out the main living qtrs.. Too much risk vs reward

@jdaspects

2 жыл бұрын

@@Mobileblaster better to use paint stripper first then a vacuum head brush nozzle

@Mobileblaster

2 жыл бұрын

@@jdaspects everyone has their own way but I mask up no vac 👍

Mick, i have decades of paint on what i think could be decent brickwork in my cellar. I was planning to use soda balating to get it off. What should my expectations be of the dust level produced?

@Mobileblaster

Жыл бұрын

Soda won't help well it would do it but cost you an absolute arm and a leg when an alternative like a fine or super fine glass would be the better option. Depending on the cfm you plan on using will tell you the dust level and how fast you want to do the job 👍

How can purchase India Punjab

@Mobileblaster

Жыл бұрын

sorry I don't have a clue hopefully someone on hear can help out?

Hm, seems like a pressure washer could achieve this about as easily, to be honest. Am I wrong in thinking that?

@Mobileblaster

Жыл бұрын

Maybe because it looks like the water is doing the work but the water is only added to suppress the dust. Possibly be able to remove this with chemicals and steam but I find that chemicals and steam only work on select jobs were as blasting will remove 99.9% so I have no issues really on completing a job 👌