Years ago I worked on my Duramax, was too lazy to remove both negative terminals. This exhibition of laziness cost me close to a thousand dollars. Fried my AC compressor. The wrench I used to remove the alternator welded itself to my AC pump. To say I was upset is an understatement. Yes, disconnect both negative terminals first task! This video is fantastic.

The rut is real. The rut is real.

I pulled the trigger on the PSC unit. My regular mechanic has been sick lately. This video will help a great deal. Think positive YT family. God bless us all. 🌠🌠🙏🧘‍♂️

Thank you. I just started this and decided to look it up before I got too far. I appreciate it.

I think I’m just gonna keep adding fluid after this video

@andrewkitchens3917

2 жыл бұрын

Unless you like mine where it pissed out the whole reservoir in one 20 minute drive 😔

@Abel3270

2 жыл бұрын

🤣🤣🤣🤣🤣🤣

@marcbenedict3676

Жыл бұрын

Haha im adding fluid about once a week

@baadkittymeow1306

11 ай бұрын

That’ll work until your hydroboost runs dry to many times and takes it out also taking out your braking power

@BoostedFA

10 ай бұрын

​@@andrewkitchens3917mines doing that now.

Awsome video and VERY helpful and informative lesson on how to do this job safely. I'll be doing same job in a few days and this video made my day. Thank YOU for taking the time to help guys like me. I live on a remote island and getting to a fix it shop in a timely manner is not possible.

Thanks for getting to the point and actually showing what actually needed to be done. I think I watched the same videos you mentioned that were dumb and they didn't show anything you need to know. Keep doing what you're doing!!

Thanks for sharing! Good practical information on a cruddy job.

Ended up leaving the top portion of the shaft in the truck and everything else went to plan pretty easily

Very good presentation.. Good for the amateur mechanic,Thanks

Thank you, and God bless your efforts Sir!

very clear instruction thanks

Great video from one grinder to another

Great video man, I have an entirely different vehicle and this video helped me replace my steering gear box 😊

Great video man definitely got my subscription

Very helpful!!!

Thanks for the video. This is what I used as a guide to do mine!

@TheDailyDrift

2 жыл бұрын

Anytime, glad to help

You're a gent! To the point, no BS, well done... liked and subscribed AND YOU PROVIDE A DETAILED LIST of tools needed in the description! Thank you! I got the very same job on a 2011 express 4500 minibus(built on a cutaway van frame) I knew this was not something to tackle willy nilly... even on the Silverado where one can get to the engine much more easily than on a cutaway van, it's a nightmare of taking all sorts of crap apart before being able to get to it! It's like trying to get to the glow plugs... horrendous! Out of the corner of my eye in the thumbnail list I see: Silverado Install Gear Box, Pitman Arm and idler bracket.... wooooooooooo! there I go!

Excellent work producing this video. This job is actually a lot easier than I thought it would be

You'll get that on those big jobs

Good work bud

Have to pull mine. Ugg. Nothing worse then having to work on the ground and smashing hands !! Thanks for the post. Now we have to work out ? Lol

Excellent video and straight to the point, I need to do mine on. chevy 3500 Duramax

@paintslayer1995

3 жыл бұрын

How did it go I’m looking to do mine as well

Good job buddy

Great video awesome listing all the tools needed for the job did you rebuild that box or replace it if replaced what brand did you go with I'm hearing a lot of bad about using reman steering boxes

Great Video! Helped me brush up on this job. On my 3rd box now and I can tell you this: you don’t have to to take off the intercooler pipe but you DAMN sure want to!!!! Also, USE OEM OR BETTER PARTS! Do not cheap out on these parts. My second box was a rebuilt piece and almost cost me my life.

Good video, thanks. Just looking at the nice garage floor and I nearly had a stroke.

Is it better to use atf for a box or ps fluid?

Thank you for video... Trying to replace my gearbox, 92 K3500 dually, Salem Oregon ✌️⚽🤟

Taking the intercooler piping snd jacking the truck up are pro tips. They definitely will save you time. I changed the pump without taking the pipe off this time and I was cursing. So much easier to do the job with it off. Edit: you definitely gashed your hand good.

Thanks good video, and you are correct, that was informative and gives me a very good idea of what's ahead. As @Kyle Tracey states "UGGGGGH!" Hope that your hand healed properly.

All right guys a buddy of my replace my gearbox on a 2500 Silverado HD 6.0 engine and even though it's not leaking power steering fluid anymore just steering wheel feels a little bit well not a little bit but a whole lot stiff and not responsive like if I want to go left and right I have to do a lot of force back and forth you know either left or right if I go left and then the road goes straight to steering wheel doesn't correct itself any advice what's going on maybe air in the system

Just did this on my truck and I also had to use your method of torch and hammer haha great video though very informational

@TheDailyDrift

3 жыл бұрын

feliciano3076 thanks, yeah you just can’t beat a little heat 😅

@MoneyManHolmes

3 жыл бұрын

Looks like a big pain... is there a way to get that pitman arm away from the frame and more accessible for the puller with it still in the truck? Can you twist it enough if you remove the 3 mounting bolts?

What is the second arm that you remove from the gear box called? (The one with the 11mm bolt) and is it the one that come straight from the steering column? I need to replace the seal on that arm in my truck and I'm trying to figure out what it is called. Also I really appreciate that you show all of the really pain in the ass parts of working on old trucks like all the shit stuck on by corrosion and the pesty bolts. Everyone else always glazes over that stuff when it ends up being the hardest part so thank you.

@deanwlkr

3 жыл бұрын

The steering shaft?

Do you have a follow up of putting it back together?

Doing this now bro haha thanks for the video help

@TheDailyDrift

2 жыл бұрын

Haha you have a duramax now? That’s awesome

there are seals in there you can melt so be very careful.

Good video, surprised you don't have more subscribers. When do we get to see how the built Miata is getting on?

@TheDailyDrift

3 жыл бұрын

uksam2000 thanks I really appreciate it, I’m actually rendering a video all about the Miata right now. It should be out a little later today ✌️

@uksam2000

3 жыл бұрын

@@TheDailyDrift awesome, look forward to it. Keep up the good work.

Had the job done. Wheel is 45 degrees off. Mechanic claims alignment will fix it. Doesn't that had to be lined up just right (shaft to box) or is it error proof? Thx

@TheDailyDrift

3 жыл бұрын

The Pittman arm is keyed so it can go on one way, but if the box turns at all while it’s off the vehicle it may cause the wheel to be off. If it is off, most alignment shops will straighten it out when they do the alignment. It’s usually a good idea to get an alignment when the suspension is worked on like this anyway. Hope this helps clarify things a bit.

@tuloko16

Жыл бұрын

@@TheDailyDrift did you end up replacing the unit, or rebuilding/re sealing it?

And it helps if you use the right tools you should have used a flare wrench it won't slip

Little tip A wiz / cutting wheel Cut 3/4 way thru that pitman arm. Then it will come right off. I know this because i fought one for 3 hrs and said the hell with this. And cut off. Then cussed myself for not doing that 1st

praying this works wish me luck

@TheDailyDrift

3 жыл бұрын

bee leif good luck!

Tap on a clip to paste it in the text box.

to get a stubborn pitman arm out drill 3, 1/4 inch holes vertically in it and hit the center of the holes with a chisel and hammer. The arm will split and then its history!

Did you do a part two to this video?

@TheDailyDrift

2 жыл бұрын

So unfortunately I did film it, but my microphone burnt out on me and all the audio was scratched. I tried recovering it and fixing it, but it was unwatchable. Install is pretty much the reverse of removal, but the important thing is to make sure your wheel doesn’t turn when you install it back in. I used a bar through it to hold it in place. Outside of that, it’s pretty straight forward. Oh yeah and bleed the lines too.

@MoneyManHolmes

2 жыл бұрын

Are the lines self bleeding on these? Just turn the wheel back and forth several times?

What's the reason you changed your gear box?

@TheDailyDrift

11 ай бұрын

Mine was leaking really bad and was loose internally.

Did you end up going back with a stock or aftermarket gear box?

@TheDailyDrift

3 жыл бұрын

I ended up getting a rebuilt box because I just didn't have the time to rebuild it myself.

Just did this on my hummer h2 and I have to say if I had to do it again, I would not do it again. Take it to someone with a lift and let them break their fingers when that steering box falls out.

Good job but you should keep garage clean and your hands Plus check part before open

Brand new to Diesels and i did this so anyone can i just coudnt think of a repair bill 😂

Where's the installation video.?

@TheDailyDrift

3 жыл бұрын

Unfortunately the audio from the install got completely destroyed. My microphone I was using gave out on me during the shoot. I was unable to salvage it, sorry about that.

Being lazy is a lot of hard work and lots of frustration....

Get rid of that mushroomed end or the hole fork. When you smack on that metal flies off you don't see and metal splinters .

9:11 *lewd shaft noises*

That's alot of tape for a paper cut🤣🤣

It's like your truck gave birth

right at 9:00

Good instruction brother but it was still a crappy job. Done is done tho

Honey , sit in there and turn the steering wheel a few times.

😅

Think smarter, not harder... Get an impact wrench

Bro, you need to invest into aome quality tools. You working too hard with those wrenches when you coulda used an socket and ratchet or impact wrench

Put some gloves on,wheres part 2 to finish job?

Ouch! Wear gloves next time :D

Next time wear gloves :D

Duramax is not a vehicle brand, it is a diesel engine, nothing more, nothing less. You would get better hits if you labeled it GMC Sierra or Chevrolet Silverado. The engine states nothing.