Removing foot peg brackets from Buell Blast

Removing the foot peg brackets from a Buell Blast involves jacking up the bike and taking out the rear shock and battery. Also you must have a socket with an articulated end and extension. It's a tight space so be patient. It took me about an hour to complete this task.

Пікірлер: 4

  • @richardhunn9737
    @richardhunn9737 Жыл бұрын

    I used three pieces of angle iron (L pieces) to make a betwixt piece. Use two to create a U, bolting together with two bolts. Use the third, within the U, to help hold them apart, facing forward, using one of the bolts... Basically, one side of the U goes onto the bike, with new bolts, into two of the frame holes (and ignore the third). The other side of the U gets the pegs' bracket bolted to it, using two of the bracket's built-on bolts... It makes the removable of the bracket easier, since not unbolting from the frame... Some drilling and angle grinder work, some bolts and nuts, a little paint... You can build the pieces using far less time than you'd need to remove it again.

  • @bosanova4545
    @bosanova4545 Жыл бұрын

    Bro I have an easy fix for you. Found a tool at Harbor Freight and you don’t need to take the shock out. This thing changes things for taking these off. So much easier!

  • @97977a4591

    @97977a4591

    3 күн бұрын

    what is that tool? i need it to fix my buell

  • @groundpounder4134
    @groundpounder4134 Жыл бұрын

    What is this tool u speak of ?