Great video sir I enjoyed it great to see another KZreadr from Gilmer Texas

I chamber check my reloads by taking the barrel out of my gun and plunk testing the rounds. Great video!!!

Very nice video. I've nee to reloading just about a year and it's always nice to learn new stuff. Thank you!!

Love the reloading art thanks for the video

Those Remington brass jacketed HP bullets are good performers, in my experience. They are getting kind of scarce for hand loaders these days. I'm with you - a leisurely pace on a progressive press allows you to pay more attention to details and feel what the press is telling you. Nice vid.

Nice job on the video guys

Great video Eddy. I like how you do things slowly so folks can see them. The only thing you did not mention is where the case gets the new primer, which I believe is at station number 2 on that Hornady press. I have a Hornady press myself, but it's a single stage outfit so I do one thing at a time for the whole tray of brass, powder, and bullets. Also, I was happy to see that you do the bullet seating and crimping in two separate stages. That's what I do too since I like to use the factory crimp die that Lee makes after I have all the bullets seated to the proper depth. The only other thing I do that you did not show is I use my Wilson pistol max gage to verify that the cartridges I've made will chamber in any .380 ACP pistol. Thanks for sharing!

@burnsrandy

7 жыл бұрын

I have been more successful with reloading if I prime on a seperate machine, a RCBS primer, I think it helps move the reloading along better if done this way, especially when making a video. Eddy

You should be visually checking each case for powder and you can bye a led light for your press so you can easily see the power level in the case

what's going on I'm 28 and I'm black and I design bullets but in a month I'm going to start making my own bullets when I get all the equipment I need and I thank you Bros for teaching me everything I know because if it wasn't for KZread I wouldn't know nothing I know now wish me luck cuz I damn sure don't want to blow up

@Luigi110067

4 жыл бұрын

Why does your race matter?

@johnblood3731

3 жыл бұрын

How are things going for you? Hope you are making your own bullets. I cast my own with lead and use lee and Lyman molds. Take care

@kinglouie3428

3 жыл бұрын

Yes I do agree with you I’m dealing with a lot of people as last week

Thanks for great video! How much costs press, all components, and a one round?

I have 4 different 380"s and plunk the barrel on everyone of them before I make a run. The chambers are all different and some times the bullet hits the lands before it seats so I load to the length that fits all of them.

What seating die are you using with which stem round or truncated?

👍👍

thanks for the good information. i am new to shooting .380 . i own a bersa 380 cc for concealed carry. i am thinking of reloading because the supply has dried up. i live in the phila. pa. area. the prices have gone through the roof on all ammo if you can even find it. $45. a box some places. i know my initial cost will be hi but i will know that i will all ways have a good supply i think that those who reload on you tube should show or comment on the guns the ammo will be used in. thanks for your time

What velocity are you getting? Do they expand consistently?

I didn't see you insert the primer. How is that done?

Hey Eddie. I want to load .380 once used shells with Accura 100 gr. RN bullets. I can't find this grain in my Lyman book. Do you know what powder I should use and what primers I can use? I have CCI 500, a few Winchester WSP and some Remington 1 1/2 small pistol too. I have Titegroup, Unique, and bullseye. I can't find the loading instructions for this 100 grain Round Nose Bullets from Accura. Any advice will be appreciated. Yes, first time for this .380.

Any recommendations for a person just starting to do reloading

I never met anyone that trimmed hand gun cartridges unless they were maybe competition shooting. Not much VARIANS, but will save you time in station eleven after it spitz one out..Just do it right and enjoy yourself ya here!!

Hi I think you're using a taper cramp? Let me know thank you. Bruce

i am a reloader. do you carry those 380,s for protection.

Nice video. What’s the copper tube on the side of your press?

@quattro4468

6 жыл бұрын

ffgrif meth.

how do you reset the primer

How much powder did you load?

Whoa, I thought those bullets were .355 diameter, not .356?? Now I'm lost.

@ditchdigger93

2 жыл бұрын

Your right. .380 Takes .355 dia. Bullets. .356 may work if they're not to tight in the chamber. I've never tired it to see. Now in a cast bullet which is almost always bigger in diameter .356 would be proper.

When loading for a Glock 42 do you change anything on your loads?

@burnsrandy

7 жыл бұрын

No,

@quattro4468

6 жыл бұрын

Easy just dont shoot plastic toys.

So if I messed up and made a few too short, say .970 are they trash?

@jingles373

5 жыл бұрын

I reload my 380's to an OAL of .975 and they work fine. Do your rounds cycle okay? Unless you are using an absolute maximum powder charge, the slight increase in pressure should not make a difference.