Rebuilding Chinese Cheap Carbon Fiber Wing [DIY]
Автокөліктер мен көлік құралдары
#carbonfiber #wing #rebuild
Rebuilding Chinese Cheap Carbon Fiber Wing [DIY]
Making a Carbon Fiber Wing
Hi guys~
I am so sorry that the video upload is too late.
A lot has happened to me lately and I had to fix them.
I'm making an informative and enjoyable video, so look forward to it!
I am not a carbon fiber expert.
I just like carbon fiber.
I study carbon fiber myself and do various tests.
My knowledge may not be perfect, but I would like to share my knowledge with many people.
If you are a carbon fiber expert, It be grateful if you could give me some advice.
I am asked a lot about the purchase of carbon fiber materials.
I bought materials from a South Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
You can find what you want.
Please enjoy the video.
Thank you.
www.easycomposites.co.uk/
중국산 싸구려 카본 윙의 재탄생 [DIY]
카본 리폼, 카본 윙 리폼, 카본 파츠 리폼
Пікірлер: 339
14:34 always gets me hahaha! Great job on the vid!
@belalaibasah105
3 жыл бұрын
I had same reaction when that happens 😂
I'm so glad I found this channel. I'm so inspired to try to wrap everything I have in carbon 😂
I can't believe I just discovered your channel. I'm addicted to your videos
This guy is the king of "ehh I bet ebay has it for cheaper"
@J.l198
3 жыл бұрын
Yeah of 🍚
@marquisethomas5611
3 жыл бұрын
@@J.l198 where ?
@1mawesomel1kethat
3 жыл бұрын
@@J.l198 no rice here, he actually takes this car to the Nurburgring.
You should start a small company where you can make custom Carbon fibre products requested by customers...would make a great business with your excellent skills tbh.
@G-G._
3 жыл бұрын
not everyone is a capitalist pig. some people like having hobbies
@sinformant
3 жыл бұрын
@@G-G._ idk wtf capitalism has to do with his comment. He was complimenting the guy on his carbon fiber skills and saying he could probably make money with it. And there isnt anything wrong with capitalism. It drives innovation....if you make a.good product, or provide a good service you get ahead, if you can't then you don't. Everyone has a shot at doing so and if you are too lazy to do so then that's no one's fault but your own. Don't hate the world because of your inadequacies....
@azmantv3729
3 жыл бұрын
@@sinformant well said sir.
@peterkim0121
3 жыл бұрын
@@G-G._ I bet you are enjoying products and services that come from the capitalist market though.
@hunterace9176
3 жыл бұрын
@@G-G._ Thanks to capitalism they can also make money off of their hobbies...
I really love your work, so detail oriented I just love the projects. Thankyou for sharing the process with us brother 🙏🏼
Awesome video, thank you very much I’ve learned a lot of techniques by watching you.
This is both educational and entertaining 🤣🤣🤣 MORE VIDEOS!!!!!!Great Work 👍
Your videos are always so relaxing! Keep up the great work :) Car looks amazing with that GT wing as well!
@younesel
4 жыл бұрын
John Lawson ASMR. (Thank me later)
you guy are the kings of emitators, you are distroying original business
Que bien me viene este video!!! Estoy restaurando un alerón de carbono y no tenía muy claro todo el proceso a seguir👍👍
I'm from Brazil and I love your videos, congratulations.
in all of his videos not one word said, and then out of nowhere the screaming marmot lmao i love it
you are motivating me to start working on my carbon fiber hood 😅
진짜 존경합니다 만드신 작품 하나하나 다 봤는데 이렇게 댓글 남기는건 처음이네요 너무 멋지십니다
Бро,ты МАСТЕР,мое уважение🙏🙏🙏👍👍👍
정말 독보적인 컨텐츠네요 항상 잘 보고 있습니다^^
Huge respect for you for sharing knowledge sir.
I love your videos ! Thank for sharing 💪
부럽습니다 능력자 최고~~!!
More videos!!! Really enjoy the humor haha! Be cool to see a either a front splitter or diffuser next!
Love the videos, keep them coming!
Great videos. Carbon fibre bike parts would be great to see 🔥
드디어,새영상이!!
볼때마다 느끼지만 대박이네요..
Even tho I sell carbon fiber parts, but I've got to say , amazing work done!!
형님 항상 대단합니다 👍
Honeycomb carbon fiber please 🙏🏻
@ntrddragn
4 жыл бұрын
Honeycomb cf would be the same process except with Honeycomb cf sheets.
@gamercoolapple1
3 жыл бұрын
@@ntrddragn it's harder to work with the honeycomb design likes to sink in or warp easier but end result nicer I have a wing out of honeycomb carbon
Omg this looks gorgeous... Greetings from Brazil ;)
Nice upgrade! I feel that most people don't realize how much sandpaper will you use making something from carbon and how much time will spend on it) I even thought to add 30 minutes part with sandpaper only in my last video :D
@INTcraft
4 жыл бұрын
And I have exactly same thoughts about carbon fiber. I'm not a professional, I just like it. And I'm glad that some people around the world think the same and make something not as a job, but just for fun and new skills
Wow, that looks awesome, also this video was awesome
@rjb7763
3 жыл бұрын
Ieojx niñas
Awesome work buddy keep it up 👍👍👍💪
Nice job!!!
영상하나에 얼마나 노력을 쏟아부으시는거지 ㄷㄷ
Awesome vidéo as always. Thanks for sharing your knowledge. Could you make exterior mirror cap Please ?
Wow great job !
Very cool and entertaining. Thanks.
Great video!
Ótimo o seu trabalho! Deve levar muito tempo até ficar pronto, não é mesmo?
Again.. nice job!!! But I really want to know how do you keep the grain on the edges matching?? Or is not orderliness?
Nice job:)))
you are very good at this you do very inspiring from here take some ideas to make in my cupra, upload videos lining pieces in forged carbon fiber greetings from Mexico
@cebollatron
3 жыл бұрын
What cupra do you have?
hello, great work . I want to make something like your end plates. It is bracket that holds crash sliders for motorcycle. So it has to be very strong maybe about 4-5 mm thick. How many layers do you recommend and what kind of layers? Thanks for answer .
Love your videos!! Do something in colored carbon
Don’t you flame the resin before applying to get bubbles out?
편집이 찰지네요
Nice job bro👌
amazing videos!!, from Colombia keep doing well. my 3d printer help me a lot for create and save money ! you have very good videos and awesome ideas
you are amazing my friend
well done!
what type or resin did you use for the styrofoam? I thought the resin would damage the styrofoam. Thanks
Good job.
Beau travail comme d'habitude 👌 Serait-il possible d'avoir le fichier STL? Merci 😊
とても素晴らしい
pls can you tell me what the name for base epoxy, the comparation for mix, and for another layer epoxy as well.? want to try masking my cheap fiberglass bodykit so it will not easy break or wavy . .
Great job and seems like a lot of work and material cost and labor.. Might as well get a good one... But great job by you none the less!! 💪🏾
I like this clip
Great video once again!! I would like to build a full wing using your method! Would be able to share the CAD of the aerofoil extension you did? Also do you have a link for the original rear wing? Thank you!!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! If you want STL files, you can share them. However, I do not recommend the wing I bought. It is a poor quality wing. If you want a nice and long wing, I recommend purchasing an APR performance wing.
Hi I’m sorry where did you buy those augmented hands ? Mine didn’t come with that sanding speed configuration.
Where did you get that foam cutter??? Thank you!!!
이번 영상이 늦게 올라올만한 작업물이네요 상판 길이연장 하는데 엄청난 노고가.. 이정도면 몰드만드는게 더 빠를수도 있었겠어요 ..ㅎㅎ 대단하십니다. 스포일러 엔드가 스프레드 카본이라 신선하네요ㅎㅎ 다음엔 드라이카본 영상도 올라오길 빕니다..ㅎㅎ
@ECOLAPStudio
4 жыл бұрын
안녕하세요! 저도 작업을 하면서 느낀 것이 몰드를 만들어서 새로운 윙을 만드는게 작업 훨씬 간단할 거라고 생각했습니다. 간단하게 될거라고 생각했지만 실상 작업량이 엄청나게 많았습니다. 그래서 몰드를 만들어서 윙을 만들어볼까하는 생각을 하고 있습니다 ^^
If you make carbon wheel you are legends
Super boulot 👍
Great work! Can you tell me why you used black gelcoat before skinning the full spoiler? Why not just resin?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! You can also use epoxy resin. However, the epoxy resin flows down to its low viscosity. But, epoxy gel coat has a high viscosity and does not flow down. So I can spread it over the whole wing and apply it.
excellent
Damn, keep growing more n more
@ECOLAPStudio
4 жыл бұрын
Hello bro! I've been too busy lately, and a lot has happened to me. I'm sorry for the video being delayed. Also, I am envisioning new content. I think I want to try many things. Please look forward to a great video!
안녕하세요, 문의좀 드릴려고 하는데요..중간에 스티로폼으로 길이를 연장 하셨는데요..스티로폼이 겔코트나 레진에 녹지 않나요..? 아니면 다른 재료 인가요..?
3D프린터 소재가 PLA 필라멘트라면 추후에 열 수축이 될텐데 괜찮나요?
You know what you doing man, impressive.. İs it possible to skin carbon on aluminium?
Finally a new video! Make more bro!
Some much sanding! So many layers. What was the total time spent?
Enjoyed the video, especially with no stupid commentary. One question, What is the purpose of the adjustment slots in end plates?
오랜만의 영상 잘봤습니다ㅎㅎ 썸네일의 마지막줄 오타가 있네요
@ECOLAPStudio
4 жыл бұрын
헛!! 생각지도 못 했는데 감사합니다!! ^^
@CrazyDOX
4 жыл бұрын
@@ECOLAPStudio 별말씀을요ㅎㅎ 앞으로도 양질의 컨텐츠 부탁드립니다
where are you located? I have a carbon fibre trunk for my Miata that could use a refinish
Make a forged carbon fiber phone case plssss
@hipijs1337
4 жыл бұрын
he already made a video on phone cases. And also another video on how to make forget carbon parts. Combine them together and vuola.
@emmanuel4924
4 жыл бұрын
Sure, but it's not forged carbon fiber it's just normal carbon fiber, do you understand what I'm saying?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I have no plans for a Forged Carbon Fiber case. But if I have the chance, I will try. Thank you.
@ernesttait3781
4 жыл бұрын
Emmanuel Figueroa Follow the same instructions as the carbon fiber but used forged carbon fiber there are plenty of videos of how to make forged carbon fiber and there’s even a company that sells forged carbon fiber squares already
Awesome and funny
You should use a blowlamp (on each epoxy layer) to avoid air bubbles instead of the squeegee and plastic sheet. The result will be perfect and it only take a few seconds.
hi, what is vinyl film give you in that case?
형 변태야 변태.. 이러다 집에 도장부스 설치하겠어..
Awesome video ! Keep it up , good work ! Can you please make a video of making a similar looking rear wing from start to finish ? Including a mold etc . I've been looking on the internet for ages and there is none. The closest thing I've seen is an aero plane wing being made but with bad camera angles and No explanation. If you could spend the time on this , it would help alot of ppl out . ^_^
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! It could also make an entire spoiler in a similar way to this video. However, I planned to build a spoiler using a mold. I think it will be simpler than this rebuild. Making a car spoiler is similar to making an aircraft wing.
Ooohh what is the model of the 3D printer? Yours looks legit My friend has a Creality Ender 3
잘보고있습니다 한가지 궁금한점은 왜 센딩기계를 안쓰시나요? 그리구 센딩을 하지 않으면 에폭시가 잘 안먹나요? 적층시에도 항상 센딩을 하셔서요
@ECOLAPStudio
4 жыл бұрын
안녕하세요! 샌딩기도 물론 가지고 있지만 잘 사용을 하지 않습니다. 평평한 판재 같은 것의 면을 잡을 때는 사용하는데 굴곡이 있는 부분을 샌딩기를 사용하기가 좀 난해합니다. 그래서 수샌딩을 하면서 면을 체크하는 것이 시간은 많이 소요되지만 저에게는 더 편하더라고요. ^^
kkkkkkkk muito showwwww inclusive as brincadeira que fizeste nas gravaçoes
A hardened nozzle is great for a 3d printer. I use it to print petg with carbon fiber in it.
Eco I absolutely love your videos and you've taught me a ton about carbon fiber. Thank you. Where do you get the vinyl plastic film you use in this video? I did some research and it seems like PET plastic will work and I have a ton of it from work so I will try that most likely. Let me know if you have any info about this. Thanks for the videos!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The plastic vinyl I used is probably PE. I bought this in a Korean online shop. However, Korean online shops do not ship overseas. This is not a special plastic vinyl. I mainly buy easily and use cheap materials.
@SpendinThatCash
4 жыл бұрын
ECO-LAP Studio I found a material that worked great. Fantastic idea. Doing my first forged carbon skinning project thanks to your videos. You’re awesome! Thanks again!!
hey can u do how to carbon car mirrors? it would be nice of you
Now you got a bigger table 😂😂😂😂😂😂
사이드미러 커버 카본 작업하고싶은데 필요한 재료 알수있나요??
e92 m3 에도 하고싶은데..ㅋㅋ 같은 윙을 갖고있습니다. ㅋ 능력이 부럽습니다. 브라켓도올리고 해야할게많네여.ㅠ
Another great video. Just a question : why are you using plastic to wrap your carbon during the cure time whitout using vacuum ?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I didn't have a large vacuum bag. Of course, It could use plastic vinyl like a vacuum bag. However, it was also possible to compress the carbon fiber using the method I used.
@TwentyOneChance
4 жыл бұрын
@@ECOLAPStudio ok thanks for your answer. So, it's better to use vacuum but if not possible, compress with plastic bag is a solution.
Can i have longest break than 10h between coating?. Just like18h?
엔드플레이트에 고정하는 볼트에는 넓은 평와서를 한개 끼우면 좋을 것 같네요 엔드플레이트와 윙을 고정하기위해 볼트에 너무 많은 토크를 주다보면 볼트구멍주변의 좁은 앤드플레이트부분에 크랙이 날 수도 있어서 평와셔를 사용해서 넓게 힘을 분산시켜주는개 크랙방지에 좋아요🙂
dam thats some custom work right there. But that wing makes that bimmer look like trash! But im no the one driving it LOL
stop * hard breathing * you're giving them the power... Ricers: Fellow ricers, it is our time to rise!
SUPER)
Great video and awesome techniques.. but I think you need more sanding before polishing .. the level of finishing before extension was better than after ( you can see it in light reflection)
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! You are correct. I had to make the surface flatter. I wanted to finish quickly, so I made some mistakes. I was not satisfied with this wing. So I will make a new wing. It will use the mold to make the whole wing. Please look forward to the video!
2 questions: 1st: could you make a forged spoiler if you wanted to ? i mean.. is that possible just like this ? 2nd: can you please link a store, where i can buy carbon fiber ? i also would like to know what type do you use usually. thank you !
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! In this way, forged carbon fiber skinning is also possible. However, shaping takes a lot of time. I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.
@goldhandrenthal
4 жыл бұрын
@@ECOLAPStudio Thank you so much ! One more thing tho.. is there an excel or something for the calculations of how much resin, etc do you have to mix for a project ? If you have something, can ypu please share it ? Thank you once again :) Love your channel !
How long does the 3D printing take please
마지막 작업때 광 낼때 폴리싱컴파운드 몇 방째리에요?? 1000방 2000방 3000방 이렇게 있더라구요~
@ECOLAPStudio
4 жыл бұрын
안녕하세요! 저는 보통 멘제르나 400 원스텝 컴파운드를 사용합니다. 한가지 컴파운드로 초벌부터 마무리까지 사용할 수 있기에 매우 수월합니다. 필요한 경우에는 1000방으로 초벌 광택을 내기도 합니다.
Humble countries and humble people only deserve cheap goods