Me clicking on this video: oh he's just gonna do it over the existing helmet Me 13 min in: This dude made his own helmet.....

@jaxsullivan2117

3 жыл бұрын

Yes now take my sub

@baglingpom9091

3 жыл бұрын

and then sat in his living room using it...

The whole time im watching I'm like. "That's cool but it's not a legally approved helmet anymore." Then he's just useing it to sim race🤣 can't complain 👍

@Maykay1312

3 жыл бұрын

Think its beter than the original lmao harder and better than the original one

@barnsnoble7066

3 жыл бұрын

@@Maykay1312 the purpose of a helmet is to absorb the energy from an impact so your brain doesn't. A harder helmet shell will transfer more of that energy to your head

@Maykay1312

3 жыл бұрын

@@barnsnoble7066 still it bends and cracks due to a hard impact and has foam inside

@neamanja

3 жыл бұрын

@@Maykay1312 yes but up on what kind of impact my man there is a science behind making helmets thats why those are so expensive

@Maykay1312

3 жыл бұрын

@@neamanja if ur realy making a carbonfiber helment for road use diy u shoud just get s helment like in this video and cover it with a layer of carbonfiber and ur set no need for making it how its done in this video especialy if ur going to use it in ur gaming setup

Crazy amount of effort for an awesome helmet. I'll be trying this but with the 2 sheets of full carbon fiber cloth and then painting the seam where each have meets! Thanks for the inspiration

Genius!! Same principle as a carbon fibre mono cockpit shell in F1. Protects against collapse and critically, whiplash due to unnecessary mass.

this is so satisfying to watch, never skiped a single frame.

no ones gonna mention how he tore apart a $600 Helmer's to do this....

@hanswurstusbrachialus5213

3 жыл бұрын

really? thought this is a 50 bucks helmet xD

@hindsite275

3 жыл бұрын

Andree H. Arai GP 6S. Once he took it apart he couldn’t give up. Big money those helmets

@hanswurstusbrachialus5213

3 жыл бұрын

@@hindsite275 indeed.. searched for it... in my regions not below 800.. phew

@Ors180717

3 жыл бұрын

600 is actually a good deal for that helmet haha i can only find them around 700 or 800

@DCportraits

3 жыл бұрын

@Chris Childers He spent $600 to build a $4000 GP-6RC. Spend money to make money.

This is insanely well done! And yes, I did not expect such an end 😁👍

That really did escalate quickly. Classic case of a small(ish) job turning into a huge one :') The end product was well worth the time and effort. Hats off to you sir :)

Definitely laughed at the end! Thanks for the great content.

@rstezza

3 жыл бұрын

Agreed was a funny ending 👍

@micthakiddz2001

3 жыл бұрын

So funny man

@marianobarone

3 жыл бұрын

🤦🏻‍♂️🙋🏻‍♂️🙍🏻‍♂️👏🏼👏🏼👏🏼👏🏼

@JOKERs2709

3 жыл бұрын

100% agree 😂

@neamanja

3 жыл бұрын

Actually thats only thing he could use it for it is too hard for use in real life becouse helmets are made to absorb impact and his helmet is equivalent in hardness to steel helmet if not even harder so thats why he uses it in sim

At the Start of the Video: „yes! Now i can make my own Carbon helmet“ At the End: „ok i dont 😅“

Wow! What patience and determination, you left me speechless. Thanks for sharing 👍

Woah... you actually made a carbon fiber helmet shell. I'm not sure it's quite SNELL approved but this is incredibly impressive.

By far, the best DIY project I've watched on KZread!

im scared that this men will end up being like how to basic

@signo89

3 жыл бұрын

Hahahhaha every video is getting more angry 🤣

@kidkny

3 жыл бұрын

Pasteleir 😂😂

@fzrfl

3 жыл бұрын

@@kidkny i think that's him too 😂

@dailydrivensvt8724

3 жыл бұрын

instead of eggs its carbon lmao

@deadinside7600

3 жыл бұрын

Quarantine really got a lot of us going crazy 😂

와 대단하십니다 ㅎㅎ 저런 용액들 구매부터 쉽지않았을것 같네요. 잘봤습니다~

정말 멋진 영상입니다. 그리고 마지막 부분은 재치가 넘칩니다. ^^

Thats quite a process, the result is amazing

Super Sick helmet!! Great job. And I’m so glad your being safe and using a HANS device and carbon helmet to play video games. Your a good role model👍 I had to edit this comment because I noticed to drive your car on a circuit and I’m sure the sim helps your technique. And building a carbon helmet is fun and gets views on your KZread channel and gives you a cool helmet for the sim. Sorry for being sarcastic in my first comment.

Admirable!!!!!! Muy bien hecho el video, bien explicado, muy divertido, genial el trabajo de la fabricación del casco. Genial el trabajo de edicion. Perfecto. Saludos desde Chile!!!

아.., ㅋㅋㅋㅋㅋㅋㅋㅋ 엄청난 분이시네요 👍👍👍👍👍👍👍👍

This guy's perseverance is something to admire

That ending was hilarious, cracking job.

@aleksandrlukas2945

3 жыл бұрын

hueta polnaja!

This looks insane! I would definitely buy a helmet like this, but without the sticker and a fully mat black cover

The way he uses those carbon fibres is AWESOME. Great result.

Thats crazy expressive. I would not have thought that high of quality to be done diy. You definitely open the door to lots of possibilities. Also your gaming (simulator) is a really nice setup.

@ibrahimchewel9539

2 жыл бұрын

My 3rd time watching your video. You are marvelous.. simply marvelous. I thought the end was hilarious !

@briguitte18

9 ай бұрын

Te quedo genial

The ending was soo freakin hilarious...!!!🤣🤣🤣🤣

@jaxsullivan2117

3 жыл бұрын

Yep

와 끝에 완전 반전 이네요 항상 재밋게 보고 있어요 ^^

진짜 금손이시네...

C’est incroyablement satisfaisant à regarder, quelle maîtrise 👌

This was in style of one KZreadr, that makes knifes of everything you can't imagine. Brilliant!

@tuerkben

3 жыл бұрын

Kivami Japanase knife guy😂

@partnerplayer

3 жыл бұрын

All we need is the cow water thing.

@tuerkben

3 жыл бұрын

@@partnerplayer yeah. It is not creepy or weird enough.

@kurniawanachmad3471

3 жыл бұрын

Are U talking abour russian guy named shurap?

@partnerplayer

3 жыл бұрын

@@kurniawanachmad3471 kiwami japan is his channels name.

Parece facil, fantástico trabajo👏👏👏

bu çalışma kesinlikle amatör değil. Bravo çok güzel iş çıkarmışsın. Birçok emek sonunda güzel bir final olmuş

those hand gestures made me expect you to throw eggs on that helmet.

@safwaanelex5781

3 жыл бұрын

How to basic🤣🤣

에코랩님 영상보다가 따라해보고있는 1인입니다. 에어스쿱복제영상만 몇번을봣는지 기억도안나네요 ㅎㅎ 직접해보니 얼마나 짜증나고 오랜시간걸렷을지 영상으론 짧으네요 ㅎㅎ 냄새도 아휴 ㅠㅠa 레진냄새 정말 견디기힘들어서 작업끝나면 바로바로 내다버려야하더라구요 몰드 건조때는 바깥에다가 건조시키고잇습니다 ㅋ 집에서는 견딜수가없어요 냄새가 ㅋ 전 작은걸 도전하는중이지만 몰드제작에는 3번만에 성공햇는데 카본씌우고 필름이랑 브리더 덮고 진공하고낫더니 진공하면서 생긴 주름이 카본에 그대로생겨 버려서 재도전해야하는 단계네요 언젠가 성공하겟죠뭐 ㅎㅎ 화이팅입니다. 아참 저처럼 에코랩님쓰시는 제품 어디서 구입하는지 궁금하셧던분들 화이바맨 이라고 네이버 검색하면되더라구요 저도 다른 영상보다가 에코랩님이 웬만한건 화이바맨 사이트 이용한다하신다는 글보고 글루가니 전부는아니지만 거의다 있드라구요

epic work, love DIY junkies:D

Lo tuyo un trabajo increible de mucha paciencia y esmero, un final inesperado y sorprendente.

I love this, i laught when i see that i play in that track too

Magnificent work , Perfect is it possible to tell me the brand and references of anti UV CLEAR SPRAY ?? Regards

that's excellent man! watching all these steps is almost therapeutic

amazingly well done! With a plot twist at the end that had me loling

If he have kids ,he would wrap them with carbon 😂😂😂 lmfao

@jonathanchen4109

3 жыл бұрын

i thought he's gonna do so. and he distroyed one good helmet...

@ericbarber3420

3 жыл бұрын

Safer then bubble wrap 🧐

@jesusandresgonzaleztorres9592

3 жыл бұрын

you bet on that jajajaja

완벽한 내용... 제대로 만들지만 안전을 증명할 수 없기에 게임으로 마무리.. 또한 넘치는 유머까지 감동임다

The second you suited up for sim racing killed me lauphing! Great job 👏 🤣🤣🤣

Very thoughtful of you to create this video 😊. I love it!

Thts so fuking awesome, great job man, glad u didn't give up

Didn’t expect the ending, lol...

The most amazing thing I ever see in my entire life

this looks amazing, i think i might just have to wrap my gp6s with forged carbon fiber

いつも楽しく拝見させております 使用している材料の詳細などお伺いできますか？

I would love to see how it stands up to SNELL/FIA Standards, amazing craftsmanship, just not exactly sure on if it’ll hold up to doing its job as an FIA advanced helmet like my Authentic GP-6RC. Cool video!

@der_kanadier

2 жыл бұрын

I am horrified to see this project. I've been riding for decades and had several spills. I would never play games with my head. Suitable for video gaming roleplay only.

@aamaraamar157

2 жыл бұрын

@@der_kanadier It is probaly safe for Driving on the Motorbike, because the filling Material is from Arai and that takes most of the Impact from a Crash but dont quote me :)

@JamesJones-tu4pq

2 жыл бұрын

Because the plastic skin that's not even 1 mil thick really helps absorb the shock not the padding on the inside.

@kasperkjrsgaard1447

2 жыл бұрын

The filling material was made for the inside of the original helmet. Not the outside. No matter what is done, the carbon fiber “whatsit” is way bigger than the original helmet.

@dougsrosen

Жыл бұрын

Helmets are designed and then the sticker is slapped on. Who knows if yours would even pass the asinine Snell test when they ram a metal ball the size of an orange from 10 feet above. Because that's so relevant in motoring applications...

You just extremely rock, dude! Great work!!

외국인 유튜버겠지 하며 보다가 라이언 물티슈에서 한국인임을 직감!ㅋㅋ

It’s amazing just how much stuff you need to do this and time waiting. I’m doing skinning and just getting all the stuff cost a lot to hope get it right lol. Any way great job

Absolutely love your work. Having minimal fiberglass experience, a few rookie questions. What is pva? what is the release film step and why do you have to vacuum bag vs just saturate in resin like fiberglass? Thanks again for your videos. Pat.

@kuribuu7876

2 жыл бұрын

I’m not certain on this, but I think the vac bag is to get 100% saturation and maybe to get rid of bubbles? That’s what seems to be the case but if anyone knows please let me know

@TelekineticCow

2 жыл бұрын

@@kuribuu7876 It also helps pull the composite into the hard to reach edges of the mold

15:30 you actually got me to laugh. Hard to do my friend!

This is one of the coolest things ive ever seen. Hats off to you man 🤙

15분간 영상을 시청한 결과 역시 돈을 열심히 벌어야 겠다 라는 생각의 결론이 났습니다 감사합니다 열심히 일해서 돈벌게요~♡

Hello! Congratulations on the result obtained! Wonderful service! I would like, if possible to pass on, the list of materials you used, because I intend to make one for myself! I thank you!

すげえ！久しぶり面白く楽しい動画観れました！エクセレント！オチまで最高！笑

Just brilliant! Well done!

ㅋㅋㅋㅋㅋ마지막반전 게임용이었어!!!ㅋㅋㅋㅋ

WTF! u spent time just to have a carbon helmet just for that ....u made my day happy with this video....cool😁🤣😂😍

Oh so glad to see this is for simulator use! Great work. Keep inspiring!

Great twist (gag) at the end. Well done.

I repeated every seconds to learn how and how, seriously this is amazing project at home.

@apophesi

2 жыл бұрын

Agree

I was worried at the end he was gonna take it on the road, laughed out loud when he got in his sim rig....Nice job, lots of perseverance to end up with a cool effect....just don't trust this on the road please! 🤣🤣🤣

Que isso… Ficou incrível!

와…감탄이… 멍하니 보게되네요 ㅋ

YOU ARE BUILD DIFFERENT! CONGRATS FOR THAT KNOLEDGE AND THAT ENDING WAS EPIC I WAS EXPECTING A F1 CAR OR YAMAHA M1 😅 REGARDS FROM MEXICO

This is awesome for sim racing, definitely can't use this on track though.

@CaptainScarlet1961

3 жыл бұрын

I sim race but just make do with a wheel & pedal set-up, I think going to those extremes is a bit sad & pathetic if I'm honest & for the money he's spent on his driving gear & race rig why not just do the real thing!

@dimsuminab0x

3 жыл бұрын

@@CaptainScarlet1961 its 100x more expensive to do the real thing. You literally will need a team. You'll need multiple tires, pay for the fuel, extra car parts, and the license cost money.

@k..............1622

2 жыл бұрын

@@CaptainScarlet1961 these extreme setups are generally useful for practicing to do the real thing. Immensely cheaper than actually driving and almost as good

완전 멋집니다. ~!

It's really interesting to see someone molding without silicon.

節子、それフォージドカーボンちゃう。 フォージドカーボン風ウェットカーボンや

@frshtmrrwfy

3 жыл бұрын

または刻み海苔かもしれない。

@user-bl3hz7vd5t

3 жыл бұрын

@@frshtmrrwfy いやいや、都昆布かも知れませぬ。

@boyjiei7765

3 жыл бұрын

なんかね、 韓国語表記の物が出た時点でね 見るのをやめた・・・、

Próximo vídeo: "Cómo hacer un ser humano en fibra de carbono"

Id love to see you make intake tubes and the mold for your BMW! Great videos you make

ชอบความพยายามขอบคุณแนวทางมากๆคับ

Beautiful job, but a tip for poor people like me. Don't do this to a new Arai helmet, go to a Pawn Shop & get a 2nd hand helmet.

@markbrouwer4901

3 жыл бұрын

Just DON'T buy a 2nd hand helmet. I dont say every 2nd hand helmet is bad but there are a lot of clone's out there with a populair brand sticker on it which will most likely kill you rather than saving your life in case of an accident. Also you dont know the history of that helmet, the previous owner may have dropped it without having much damage on the outside but on the inside there may be damage. Me personally would just save up a few hundreds dollars extra to get new gear than buy it for cheap from some pawn shop

@briankang7019

3 жыл бұрын

@@markbrouwer4901 Literally doesn't matter as the guy used it only to create a mold for his new helmet which he uses for simracing

@markbrouwer4901

3 жыл бұрын

@@briankang7019 that's true. But for riding in real life, i would just rather buy a new one.

@briankang7019

3 жыл бұрын

@@markbrouwer4901 Yea, I would never cheap out in safety gear either. Good advice either way!

@sosgreengaming

3 жыл бұрын

$50 helmet for a $50 head

한참 몰입해 있다 마지막에 빵 터졌다 진심 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ

@user-hn4yt8lu7i

3 жыл бұрын

저도 모르게 한숨이.....

@user-sq5vx9ps8e

3 жыл бұрын

정말 현장 라이더분인가 했다가...., 식스센스&유주얼서스팩트를 능가하는 반전 입니다

@eifjvji

3 жыл бұрын

딱봐도 ddgt때부터 차 타는사람 같은데...

All that work for a sim racing helmet, I was flabbergasted, I did not see that coming. Great job and thanks for the entertainment!

Love it. This person who ever he/she is is awesome!!!!! - Nice glass work too...

This guy is definitely how to basic smarter brother. Its started more and more 'angry' than the other vid, but thanks no egg yolk was harmed. 🤣😂🤣😂🤣

That may just be the coolest thing I’ve ever seen on KZread. Mad respect sir. ✌️

Ur artwork is amazing!!!

absolutely amazing job.... well worth the time and effort. top job buddy

이거 한국분인가요 신기 내눈 진짜인가 으심 ㅎㅎㅎㅎ

Dude I gotta say you something... I looked for "How to make fun" and found this video

으아악! 바이크 타는 분인가 했는데…… 감동 받아 바로 컴패 라구나 세카로 달려갑니다~~~

영롱한 헬멧이네요!!! 갖고싶다~~~ㅋㅋ

Is this FIA certified? lol

@SeamTressGaming

3 жыл бұрын

DIY certified :)

@chris-tg6ki

3 жыл бұрын

@@SeamTressGaming I was thinking wouldn't mind seeing him test this for the road

@Jeffball610

3 жыл бұрын

I'm not sure anyone would argue it, but I don't know if this can technically be certified. Unless you're racing at the higher levels, I doubt anyone would question it. I'm sure it would pass if it was to be certified.

@smoke05s

3 жыл бұрын

@@Jeffball610 No DOT certification, No Snell certification, no Bueno . . . no matter how good of a job he did. They test for more than just impact. Perfect for his application however. And that's the coolest looking helmet ever!

@Cloakedsphere

3 жыл бұрын

@@Jeffball610 It'd never pass any certification with a seam down the middle. Helmets are made seamless for a reason. Many times has a helmet been hit and split down the middle on older tech. Thats why no one makes helmets that have a seam down the center, carbon fiber or not.

Sooo You took a beautiful helmet split up spend God knows how many hours to make a carbon fiber Fake 1 for E racing?

@jaiivanoff

3 жыл бұрын

only good for eracing would not trust it on road

와 이건 정말 놀랍네요 ㄷㄷㄷ

막짤에 빵터짐요.....r 차타러 나가는줄 알았는데....ㅎㅎㅎ 암튼 금 손중 최고봉인정

I thought this guy should be get crush test until didn't see the end of part, it'll be fine.

For everyone questioning the safety, he used tools and processes consistent with what factories do to make this exact same helmet in its carbon version. I know it's not tested and he should never sell it - he probably has no intention of ever doing it as multiple lawsuits would income very quickly - but this is probably even safer than what he started with. There is A LOT of overlay between the carbon fiber sheets, so the helmet would never split in half. Also he used the original padding, which is certified. The engineering is preserved by his moulding technique. He could take this to a track and he would be as protected, if not more, than someone using for instance a cheap SA2020 helmet.

@atsushiishirame4858

2 жыл бұрын

would you honnestly bet your life on it bro ?

@yanava

2 жыл бұрын

@@atsushiishirame4858 if he made me one exactly like the one he did, I'd use it on the Karting track in a heartbeat.

@johnjacob688

2 жыл бұрын

There is real science and engineering behind making a helmet safe. Especially for a company like Arai. This is nothing more than a show piece that should never be used for anything other than sim racing.

@yanava

2 жыл бұрын

@@johnjacob688 science and engineering go into designing the helmet and the build process. The rest is mechanical. You'd be amazed at how little skill is needed to reproduce it once it's done.

@johnjacob688

2 жыл бұрын

@@yanava There's no way this helmet shell was hand laid even close to Arais manufacturing specs.

한국에 이런 능력자가 있었다니.. 구독박고 정주행 합니다..

That's really cool bro... Appreciate ur effort and Patience

This video is God tier. You deserve a lot more subs

Man you deserve a million likes for this!

make carbon fiber helmet for playing a game. . . safety-man of the year

I was coming to find an instructional video on how to make a forged carbon part for my 1299 (Want to make a forged carbon faired bike [it was totaled out due to taking a slide down the good old interstate]) but this was awesome :D