I love the texture of "Forged" carbon fiber. It gives me an idea to do kitchen counter-tops using this method. It has a "Black Granite" quality about it. Looks cool!

This is the type of creation I needed in My Life!!!🙌🏽🙌🏽🙌🏽

Pro tip for ya: When working with MDF, use a sanding sealer on all the surfaces. It’s cheap, and it doesn’t change its shape or properties, but it does “seal” it when pouring resins or epoxies or even painting it. It’s very easy to use, dries fast, and once keyed, provides the same adhesion as the raw MDF in my opinion. Love the channel!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you very much for your advice. I'll try it the next time I work with MDF. I'm will make a fun and informative video. Stay tuned to my channel. Thank you.

@albertozampierin3036

4 жыл бұрын

@@ECOLAPStudio hi where i can buy the bags for make vacuum the pieces?. The same that you use. Thanks

@ErtsenPlayGames

4 жыл бұрын

@@albertozampierin3036 look online for travel vacuum bag (you put clothes inside)

@ErtsenPlayGames

4 жыл бұрын

@@ECOLAPStudio this "sealer" is just PVA ....in my opinion its waste of time if you aply thick resin / gelcoat and in the same time it is used as release agent for resin etc so.......

@penguinstalker1238

4 жыл бұрын

@@ECOLAPStudio hey bro u should make carbon fiber mirror housing

묘한 중독성이 있어어 계속 보게 돼네요~~^^ 저도 한번 도전해 보고 싶은 욕심이 나네요.

Guys ! The best channel about carbon fiber on KZread is here!

Eres un fenómeno! Yo estoy empezando con la fibra de vidrio ✌️

For anyone trying this, you can buy chopped carbon to save yourself a little bit of time. Very cool video.

@agungwidjaya3778

4 жыл бұрын

Should i use the 12k carbon or 3k carbon?

@RodrigoNascimentoMattos

4 жыл бұрын

@@agungwidjaya3778 12k is better

@warrenleak5706

3 жыл бұрын

Wxaxrngg.

@warrenleak5706

3 жыл бұрын

Engins engl ish english 3

@WereAllThatBored

3 жыл бұрын

@@agungwidjaya3778 Sorry for the late response. 5 months later and KZread sends this alert. With forged carbon use whatever the cloth you want. If you want wide go wide. If you want narrow weave go narrow. With forged carbon its not the same as continuous weave. Its cosmetic not structural. Pick the cloth that has the look that you are trying to achieve. It will be light and look great, but dont count on it being any stronger than the epoxy bound with

Exactly the video i've been lookin for. Tank you very much. Nice work !

That is absolutely gorgeous! Great video as always. I am going to make these someday. I would like to make kitchen counter tops like this.

알사장님 추천으로 왔습니다. 영상 퀄러티 좋아요~ 재미있게 보고갑니다

형 레전드네... 개멋있어 (형 유튜브 더 대박나면 좋겠어요~~)

Muy profesional el trabajo todo limpio, ordenado y de mucha delicadeza

This was exactly wat i needed to see for my new project! Tanks!

your channel is gonna blow soon! great content all around!!!!

I like the way you kick away the old table!

You should start using foam cores on some of your projects. In this case a foam wrapped table would weigh WAY less. Love your channel!

@Lolatyou332

3 жыл бұрын

This is what I've been planning on doing. Only problem is that it limits where you can screw it and you will also need to apply carbon fiber to the bottom of the table. You will have to create a mechanical lock or use glue to allow screws to be used.

@vocks85

3 жыл бұрын

@@Lolatyou332 could you drill holes in the bottom, fill with epoxy or carbon epoxy mix, and tap it? Or you could just drill holes and install rivnuts?

@Lolatyou332

3 жыл бұрын

@@vocks85 best case, you would install a metal nut that would be mechanically locked when the carbon fiber is hardened. Most feasible case is just to use rivet nuts as it would make a mechanical lock. The rivet nut becomes a potential failure point, but in reality, furniture really doesn't need that level of strength.

@vocks85

3 жыл бұрын

@@Lolatyou332 good points! Can’t wait for the next video!

와 이런거 배우는 공방이 따로 있나요??!!! 구독 좋아요 알람설정까지 하고 갑니다~♡

I just watched this video for a second time and still that forged carbon fiber looks real good! One question regarding the finishing, on this video I see you sanded and then used a cutting compound to get the high gloss shine but I have seen in other videos after sanding people apply 2k clear lacquer. Question is which more durable and better for car interior pieces, sanding and then cutting and buffing the epoxy resin or sanding the then applying the 2k lacquer?

Una pasada de trabajo!!

Please make video making Forged Carbon dash trim! Love all the videos!

That came out sweet, I swear when you was putting down the fibers it looked just like the bottom of a very nasty chicken coup...;) What a fantastic use of leftover carbon fiber!

I hope you can help me, is it necessary to use peel ply? Or could it be made without it, even if the finish was different? And if the epoxy gel coat is the same that people use when working fiberglass

혹시 오븐 이나 열에 구우셨나요 아니면 상온에서 12시간 동안 놔두셨놔요

동영상 재미있게 잘 보고있습니다. 혹시 동영상을 보고 해보고싶은게 있는데요. 본을떠서 개인이 따라 할수있을까요?

Oh yeaaah une nouvelle vidéo 💪🏻💪🏻💪🏻

yoooo this the one i was waiting fo! it turned out amazing man! what length chopped stand did you end up going with?

이번 영상도 잘 봤습니다! 전에 만드신 카본 테이블보다 카본이 덜 들어가나요? 카본 소비량이 궁금하네요! 아 그리고 7분 7초에 나오는 흰색빝같은거 구매처좀 알수있을까요?

Please make a forged CF remote holder. Also you could have used thick glass sheet with some weights on top to make the surface perfectly smooth.

Jeeeez this looks amazing! Amazing video once again! (Also funny too!!) Keep up the amazing work!! Be safe during this COVID-19 as well :)

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you so much. I hope you and your family are healthy.

Encore une superbe vidéo 😉 continue comme ça 👍

What do you spray on the board right before sanding/leveling the board? At these times, 5:58 and 6:35? I am assuming first one is water and second one is acetone? Please help.

Just discovered the channel and love the content! You should consider selling miscellaneous items as i know many people as well as myself would be interested! Keep up the great work!

@lukaszsikora849

2 жыл бұрын

How much that cost you?

you really do an exceptional job. You have taught me and I am going to start lining parts of my car. Congratulations on your work and dedication.

@blackoutz4765

2 жыл бұрын

Ikr . Ima do everything i can as forged carbon

NICE AND FUNNY JOB, PLS MORE CARBONS FOR M4, I LOVE THIS CAR

@pewtopiousjohnstone3546

4 жыл бұрын

amen

잼있으셔요~^^ 잘보고 있어요

That would look even more awesome with gold flakes in it but wow looks amazing

do more interior pieces please! like side panels etc

Imma make myself one of these🔥

Hey bro youre inspiration

YOU ARE AMAZING

毎回思いますけど、凄いですね！

nice process!

Iam from indonesia,, i like this art

super vidéo , bravo !

Brilliant 👌

do you have to use blow torch or can you use a heat gun?

드디어 떡상...bb 축하드립니다^-*

Insane !!!

오 이 테이블이 훨씬 멋지네요!

Приветствую! Очень шикарно, впечатлительно, и не обычно! Подскажите пожалуйста, что за материя которую Вы потом отрываете? Заранее спасибо!

なるほど。余った物を再生する為に使用した訳ね？いいアイデアです👍

@donxmidori

4 жыл бұрын

元々カーボンコンポジット、チョップドカーボン、などの名前でこーゆー柄ありますよね

And that is a masterpiece! (Not joking)

Hi !! it's amazing, but I heard MDF is dangerous to human due to its dust. So is it safe to use as an indoor furniture? Is it alright if we coated the exposed mdf board with epoxy resin to prevent its dust come off from the board? thanks for this great video

Very nice!

crazy content thank you

Perfect job, man! Like your videos very much! Can you give us (your subscribers) advice, how to do cylindrical things such as vase, skittle or may be intake manifold pipe by using mold and without damaging original item. I know that we need to use at least 2 part fiberglass mold, but don’t know how to put pieces together.

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Can you make the cylinder into styrofoam? If you can, skin carbon fiber made of styrofoam (requires multiple layers). And styrofoam can be removed with acetone. I hope helpful.

@Super0Phantom

4 жыл бұрын

It’s a good idea to use styrofoam. But what if we need to make complicated item which I can’t make out of styrofoam or may be if we need reusable mold?

혹시 지금까지 해오신 영상들 처럼 도전 해보고싶은데 이거 화학이나 전문적인 지식이 필요한 스킬들인가요? 희석을 어느정도 해야하는것같고 저울도 나오는거보면 어느정도 지식이 있어야하나 싶어서 무작정 덤벼들기가 겁이나서요 그리고 영상 모두 너무 좋습니다 m4도 멋있구요

@Oixmq

4 жыл бұрын

저도 직접 만들어보진 않았지만 진짜 경량화에 신경쓰는 통짜 카본으로 만드는데 아닌이상 이정도의 제품은 전문적인 지식까진 필요하지 않은걸로 압니다. 다만 들어가는 재료와 도구가 일반인이 가지고 있기는 힘든게 많아서 그렇죠...

@user-pf6nb3vn1i

4 жыл бұрын

저정도는 특별한 지식없어도 DIY 가능합니다 ㅎ 희석이라기보단 에폭시 믹싱 비율인데 그런거는 판매처에서 다 제공하는 정보들이구여~

Any alternative for peel ply?

favorite inspire

This is a great video. If I want a skinned bumper, how much carbon fiber do I need to prepare, and how much do I need to deploy the epoxy. If you can give me suggestions, I will be very grateful, thank you!

취미로 수전사,도색을 하다보니 알고리즘이 카본영상을 추천하길래 봤는데 도저히 멈출수가 없네요 영상 다봤습니다 급 카본 땡기네요..장시간 작업일텐데 인내심에 1따봉 드립니다 3M 반면형 방독면 플라스틱부분 카본제작 어떠십니까?ㅎㅎ 6502,7502 추천드립니다

Carbon fiber hood video soon??? Loved this video btw.

중간중간 깨알 개그코드ㅋㅋㅋㅋ.... 영상 잘보고있습니다. 저도 언젠가는 카본파츠를 직접만들어보고 싶네요😃

Слава Рукастым - Glory to handymen!

Amazing. I’m looking to this on some of my interior trim in my car, but I want the forged dry effect. I mean without the gloss. Should I just stop before the polishing part or there is a different procedure?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! If you want matte carbon fiber, you can use matte clear spray after sanding. However, care must be taken to avoid pinholes when using it. because matte cannot be polished.

@maxbyrde6628

4 жыл бұрын

Ok thanks. Pinholes? You mean air bubbles?

It will be great to add the material used in the description

I have a faded carbon fiber hood on my car can this be done over carbon fiber ?

Love your videos! Great job keep it up :D Can you make a list what you need to make the parts?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. Epoxy gelcoat Lamating epoxy resin Top coat epoxy resin Carbon fiber cloth I'm going to show you an online shop in the UK. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk/

Yo hi i have a question, let’s say i want to make a table top of 120cm x70cm how much carbon, gel coat & resin should i use?

Yeeaah, im putting on in the game room

Love from Pakistan 🇵🇰 ❤️❤️❤️❤️

Hey man, love the channel and all the amazing carbon work you do. I found your channel and I loved the videos so much I bought some red reflections carbon fiber for some interior pieces on my car. This is the first carbon fiber work I’ll ever be doing and I was wondering if I can use spray adhesive instead of using epoxy gel coat? And if anyone has any tips for me as a beginner that would be awesome! Thanks!

Bien plus belle! Top

Hay there, what was the material that you put over the epoxy to set ? Am looking at doing a desk top for my boy and it’s the only thing iam stuck on. Cheers Brian

@nik_6081

3 жыл бұрын

Do you mean the cloth he layed over the carbonfiber? If yes its called peel ply. It is used to remove excess air form the cf infusion. Im not sure if it is needed in this case though.

Amazing

At first I thought that looks a mess but when the article was finished....wow! it looks good! One question can you use rubbing alcohol or isopropyl alcohol instead of acetone to the clean the item?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy!! Yes, You can use alcohol or isopropyl alcohol. I hope you helpful.

The black glue that you applie to the wood is normal wood glue ?

Superbe vidéo j'aimerais bien commencer à faire quelques pièces simple carbone mais où se procurer et quoi

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

1:55이때 만드는 검은 액체는 무엇이며 어떤 용도로 쓰이나요?

where do you learn to make this stuff?

what is that cloth you put over the carbon fiber to soak it up called?

Can you make a video making something in colored carbon? How does that work? How do you add color? Thanks. Love your work.

@shady_77

4 жыл бұрын

colored carbon fiber has to be specially order because the color is mixed in the weave

@jadekingofficial

4 жыл бұрын

You can either buy coloured weave or tint the final clear coat

Great work what size trowel did you use

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! What I used is a plastic of about 25cm.

Video perfect! wondering what gelcoat was used. the black one right at the beginning, is it a gelcoat that is used to make molds?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I used an epoxy gel coat. Epoxy gel coats are often used to make molds.

@jakubnovak7975

4 жыл бұрын

@@ECOLAPStudio Thanks for the reply ! Very nice work, I hope I will have the same success: D

LOL funny and educational.

great work. try using half the amount of compound. you'll get a better cut and have less chance of pig tailing the epoxy. seriously awesome videos my man. maybe use foam instead for extra weight reduction?

Do you have to vacuum seal small like interior parts ?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I did not use a vacuum bag when making this table. Pressed using a peel ply.

Can you Do More car stuff like mirrors splitters and that kind stuff

안녕하세요. 궁금한게 있어가지구요. 유명 자동차 브랜드에서도 포지드카본 파츠들을 많이 내어놓잖아요? 그럼, 그 카본 파츠들도 이렇게 영상처럼 카본(파이버)천을 잘게(?) 잘라서 사용해 만드나요?

@ECOLAPStudio

4 жыл бұрын

자동차 메이커에서 이렇게 번거로운 작업을 하지는 않습니다 ^^ 포지드 카본도 우리가 흔히 보는 능직, 평직 카본 원사가 있습니다. 압착된 형태의 카본 원단이라고 생각하시면 됩니다. ^^

@user-in7gl2kl6g

4 жыл бұрын

@@ECOLAPStudio 으흠.. 그렇군요! 알려주셔서 감사합니다. (^○^!)

That would be sickkkkk as a front splitter.

Hi, really loved your work here, with the ease that you've done this project is amazing. I was planning to get the same forged carbon fiber look on my bike, my problem is that I'm afraid that the epoxy will turn yellow within a year or two, due to repeated UV exposure. Is there any way to mitigate such a problem? Thanks in advance.

@ZILLA....

4 жыл бұрын

They make UV cutting clear epoxy, he used it in his CF canards video

Awww man, wish u would do close up shots of the finish on that table top 🙁

궁금한게 있는데요. 이게 강성이 나오나요? 포지드 카본은 금형으로 찍어내서 강한 압력으로 조직의 강성을 높이는 방법으로 알고 있는데요. 그냥 포지드카본 "룩"을 얻으시려고 한거죠? 궁금해서 여쭤봅니다~

@ECOLAPStudio

4 жыл бұрын

안녕하세요. MDF 판재 위에 스키닝이 된 것이라 테이블 자체로의 강성에는 문제가 없습니다. 그러나 MDF 판재가 없다면 그 강성이 테이블로 사용하기에는 조금 부족할거라고 생각합니다. 하지만 실제로는 생각 이상의 카본이 많이 들어가서 롤러와 필플라이에 의해서 압축이 되어있습니다. MDF 없이 테이블을 만들려면 카본으로 내부를 채운다면 그것은 상상 이상의 비용이 들어가고 허니컴코어나, 매트코어 등 내부를 채울 수 있는 코어 재료를 사용하면 강성과 비용 모두 만족시킬 수 있을거라고 생각합니다.(그렇다고 재료가 저렴하진 않습니다) 포지드 카본 룩이라기보다는 얇은 포지드 카본 플레이트라고 보시면 되지 않을까 생각해봅니다.

@desigbohn2595

4 жыл бұрын

@@ECOLAPStudio 감사합니다 ^_^ 작업 너무 멋져요 ㅎㅎㅎ

What bagging materials do you use. I am looking for a cheaper say to hag for my first time. Everywhere I look the materials are expensive.

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I use vacuum bags for clothing and food. It is very cheap and easy to buy. I think you can buy it easily.

браво! это твердое 6 из 5!

Amazing video. Do you think the gas torch to remove air bubble can be replaced with a heatgun? Thx!

@isanmoldonado4587

4 жыл бұрын

Kovacs yes

@kovacs9974

4 жыл бұрын

@@isanmoldonado4587 thx !

What do you use for your epoxy gel coat and hardener?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.

Hello! Very beautiful tutorial for forged carbon fiber. And I have 1 question: how to give color to the carbon fiber? For example the red tinted carbon fiber, from bugatto chrion exposed carbon fiber body pannels. Thank you!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! There are several way of coloring carbon fiber. There are using colored carbon fiber or mixing the epoxy resin with pigment. But I haven't tried it yet. I will try it if I get a chance.

나중에 아이패드 케이스 만들기 같은것도 올려주시면 좋을것 같아요 뭔가 좀더 일상생활에 근접한?....

Cannot find any Gelcoat resolcoat 7060 black, any help please ? What can I use instead ?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! It is not resolcoat. It is resoltech. You do not need to use Resoltech epoxy gel coat. It may use other brands of epoxy gelcoat.

@fredericjamar2522

4 жыл бұрын

ECO-LAP Studio Hi ! Thanks for your answer, my bad, I mean Gelcoat Resoltech (The black one), I cannot find this product online. Did you have a link or something similar to share ? 😕 By the way, nice videos 😁