Really good 4ws with gyro feature Get your new Radiolink RC6GS on Amazon!! www.amazon.com/gp/product/B07...
Жүктеу.....
Пікірлер: 40
@jeffv2074 Жыл бұрын
Very cool truck bro 👍
@edmundjohnson11985 жыл бұрын
cool,nice work the TX.
@Bawla1875 жыл бұрын
Dude that truck set up is great.
@ExocagedRC
5 жыл бұрын
P8ntballa thank you
@familyman8314 жыл бұрын
Such a good radio. I love it
@stevemoon21365 жыл бұрын
Awesome Truck! 👍😎👍
@byknmikerc71535 жыл бұрын
ready for solid axle racing!!! nice rig
@jimmorton36783 жыл бұрын
Thank you! Very helpful 👍
@krashkingrc97154 жыл бұрын
Awesome truck definitely wicked
@bespincustompropsbombarta83003 жыл бұрын
Great truck lands so great from jumps. Would crawl if you had locking diffs
@jamesswift46415 жыл бұрын
Cool car crushers👍👍
@gheorgheoltean44675 жыл бұрын
Nice!
@silinalexandr2 жыл бұрын
5th or Steering channel should be on revers mode to show such behavior. If both will be in normal or both on revers it will be Crab.
@tomhigley680 Жыл бұрын
Someone needs to make a video on this transmitter for an MOA RC 2 motors and dual dig. Like the Bully 2. Just a thought
@familyman8314 жыл бұрын
My steering is going the opposite way where I turn right it goes left but when i steer left it goes right. Do you know how to change it ? Would really appreciate feedback. Kind regards
@stormboiiii2 жыл бұрын
Hey dude I'm looking into getting a transmitter that can run 4ws well I'm new to the 4ws ( I'm used to 2ws ) do you have any recommendations that are under £100
@Jumpman3233 жыл бұрын
I just put 4ws on my losi lmt. What does the gyro do?
@azazasiswoyo18105 жыл бұрын
Niceeee...
@motojoe54215 жыл бұрын
Just a wee bit wide for crawling. Lol I need 4WS for the Gen 7 .
@ExocagedRC
5 жыл бұрын
Moto Joe LoL yeah a bit wide. I’m hoping to have the parts for 4ws gen7 portal soon.
@kendesign36225 жыл бұрын
That's one bad rig!
@RedRoxRc5 жыл бұрын
That thing is sweet! Too bad it doesn’t want to crawl lol.
@RandomRichZ2 жыл бұрын
where can i get them wheels n tires?
@db_motorjoy76783 жыл бұрын
How do you switch from 4ws to crab on that remote? Is it a button or do you have to go into the Menu?
@ExocagedRC
3 жыл бұрын
yeah gotta get in the menu
@db_motorjoy7678
3 жыл бұрын
@@ExocagedRC thanks. It's annoying this one and the Flysky fsgt5 require menus. The Futaba and the Spektrum you can just click a button to toggle between modes.
@cwthemachinist5 жыл бұрын
Dude, that truck is badass! Some of the turns were so tight it almost looked like a skid steer. Did you build it from extra parts and pieces you had on hand? Very Cool man. I always like your vids!
@Shauntipson4 жыл бұрын
Can you turn off the back servo so it just front servo works
@ExocagedRC
4 жыл бұрын
Yeah I sure can.
@Shauntipson
4 жыл бұрын
Can you make a video of how to Please I’m pulling my hair out
@Shauntipson
4 жыл бұрын
Hi
@Stevewasere
3 жыл бұрын
@@Shauntipson ever have any luck with this? Seems like there is no info online
@tokin42072 жыл бұрын
Change the tires it will crawl better
@stephenchun68255 жыл бұрын
Nice review sir but I think this transmitters are not so good for setting a 4ws then the other transmitters like the fsgt3C.. It's hard to settings 4ws it's like a permanent switch..if I wanna use crab steering or else styles.. I'm gonna go to the transmitters setting to turn it off or on it.. There is no single switch like the fsgt3c if we want a crabby steering we just push the button left or right, On and off the back steering like i always watch people doing in the other channels of rc.. And this transmitters receiver are not waterproof even he got a gyro system.. I've buy a wrong transmitter for my Rc crawlers 😔..i guess I wanna buy a new transmitter for my Rc crawlers again and it suited be a fsgt3c because its cheaper than the other transmitters but sadness is they have 3channels only 😔
@ExocagedRC
5 жыл бұрын
stephen chun you are correct, this will work 4ws but it’s just not the best way to go. I hack and sell the gt3c radios and as you already know they operate 4ws better than anything else on the market.
@stephenchun6825
5 жыл бұрын
@@ExocagedRC yep.. The gt3c is the best and a little cheap transmitter.. But if I wanna hack into 8channels what kind of receiver will i buy and how to setting it sir? Need Help sir😁
@ExocagedRC
5 жыл бұрын
stephen chun Flysky has 6ch and 8ch receivers that bind right up. Also hobbyking and turnigy also have receivers that work.
@ExocagedRC
5 жыл бұрын
To hack one you’ll need the firmware and a way to install it. I’m not sure what the current new method is but I have a hack kit and firmware I use on all mine. I have programming videos on it on the channel, setting end points and epa and all kind of things including 4ws.
Пікірлер: 40
Very cool truck bro 👍
cool,nice work the TX.
Dude that truck set up is great.
@ExocagedRC
5 жыл бұрын
P8ntballa thank you
Such a good radio. I love it
Awesome Truck! 👍😎👍
ready for solid axle racing!!! nice rig
Thank you! Very helpful 👍
Awesome truck definitely wicked
Great truck lands so great from jumps. Would crawl if you had locking diffs
Cool car crushers👍👍
Nice!
5th or Steering channel should be on revers mode to show such behavior. If both will be in normal or both on revers it will be Crab.
Someone needs to make a video on this transmitter for an MOA RC 2 motors and dual dig. Like the Bully 2. Just a thought
My steering is going the opposite way where I turn right it goes left but when i steer left it goes right. Do you know how to change it ? Would really appreciate feedback. Kind regards
Hey dude I'm looking into getting a transmitter that can run 4ws well I'm new to the 4ws ( I'm used to 2ws ) do you have any recommendations that are under £100
I just put 4ws on my losi lmt. What does the gyro do?
Niceeee...
Just a wee bit wide for crawling. Lol I need 4WS for the Gen 7 .
@ExocagedRC
5 жыл бұрын
Moto Joe LoL yeah a bit wide. I’m hoping to have the parts for 4ws gen7 portal soon.
That's one bad rig!
That thing is sweet! Too bad it doesn’t want to crawl lol.
where can i get them wheels n tires?
How do you switch from 4ws to crab on that remote? Is it a button or do you have to go into the Menu?
@ExocagedRC
3 жыл бұрын
yeah gotta get in the menu
@db_motorjoy7678
3 жыл бұрын
@@ExocagedRC thanks. It's annoying this one and the Flysky fsgt5 require menus. The Futaba and the Spektrum you can just click a button to toggle between modes.
Dude, that truck is badass! Some of the turns were so tight it almost looked like a skid steer. Did you build it from extra parts and pieces you had on hand? Very Cool man. I always like your vids!
Can you turn off the back servo so it just front servo works
@ExocagedRC
4 жыл бұрын
Yeah I sure can.
@Shauntipson
4 жыл бұрын
Can you make a video of how to Please I’m pulling my hair out
@Shauntipson
4 жыл бұрын
Hi
@Stevewasere
3 жыл бұрын
@@Shauntipson ever have any luck with this? Seems like there is no info online
Change the tires it will crawl better
Nice review sir but I think this transmitters are not so good for setting a 4ws then the other transmitters like the fsgt3C.. It's hard to settings 4ws it's like a permanent switch..if I wanna use crab steering or else styles.. I'm gonna go to the transmitters setting to turn it off or on it.. There is no single switch like the fsgt3c if we want a crabby steering we just push the button left or right, On and off the back steering like i always watch people doing in the other channels of rc.. And this transmitters receiver are not waterproof even he got a gyro system.. I've buy a wrong transmitter for my Rc crawlers 😔..i guess I wanna buy a new transmitter for my Rc crawlers again and it suited be a fsgt3c because its cheaper than the other transmitters but sadness is they have 3channels only 😔
@ExocagedRC
5 жыл бұрын
stephen chun you are correct, this will work 4ws but it’s just not the best way to go. I hack and sell the gt3c radios and as you already know they operate 4ws better than anything else on the market.
@stephenchun6825
5 жыл бұрын
@@ExocagedRC yep.. The gt3c is the best and a little cheap transmitter.. But if I wanna hack into 8channels what kind of receiver will i buy and how to setting it sir? Need Help sir😁
@ExocagedRC
5 жыл бұрын
stephen chun Flysky has 6ch and 8ch receivers that bind right up. Also hobbyking and turnigy also have receivers that work.
@ExocagedRC
5 жыл бұрын
To hack one you’ll need the firmware and a way to install it. I’m not sure what the current new method is but I have a hack kit and firmware I use on all mine. I have programming videos on it on the channel, setting end points and epa and all kind of things including 4ws.
@stephenchun6825
5 жыл бұрын
@@ExocagedRC OK thank you very much sir