Thanks I wasn’t expecting to find a video and this is gonna help me out so much

Good video tank i needed a refresher lol

@TheTankRC

2 ай бұрын

Lol, anytime, you know I'm there for you LOL

A little tip on the transmitter. Put a little lego wheel on the channel 3 knob. And you can use your thumb to steer the rear wheels. And your other hand on the wheel. It makes driving fantastic.

@TheTankRC

2 жыл бұрын

Good idea I might have to try that

This is the best channel mixing explanation on the web. Great work. 👍🏾 💯

Got to say. Owning one of these controllers. appreciate you doing these videos Tank. Well done man.. :)

great information and video

Very nice 👍😊👍

Another awesome instructional RC video! Love the creativity Tank!

Thanks needed this information 🙏🤘😎

@TheTankRC

2 жыл бұрын

Thanks for stopping by to watch and I am glad it was helpful.

I thought about doing this on my TF2 but more like supercars where it isn't noticeable. and that way id get a little function to fight hills and yet still look like a scale Toyota. just a fun thought. we'll see. Good video RC friend!

Thank you sir.. For sharing this useful information... Very clear and accurate informations... Like and Subscribed....

@TheTankRC

Жыл бұрын

I am glad it was helpful to you. Thanks for watching and supporting

Gta6 is looking sick

Nice video

thanks, the manual is not great and the menu system on RC6GS is crap compared to my old Spektrum DX3R I needed to setup a dual servo for my E-Revo and this helped me a lot

@TheTankRC

3 ай бұрын

Glad I could help. Thanks for taking the time to leave a great comment.

Could u do it the opposite way so u have the normal steerin on big wheel n the 4 wheel steerin on the little wheel m8

@simontromans2748

2 жыл бұрын

Nice one👍 in mix the MST is CH3 (CH3 set to the VR dial) and the SLV is ST (steering)

Precious info here! Quick question, though: is it possible to achieve the dual steering using a single servo?

@TheTankRC

9 ай бұрын

Thank you for the great comment, yes some companies actually do sun a single Servo for dual steering like Tamiya Clodbuster and the HPI Wheely King

@comi9

9 ай бұрын

@TheTankRC great! Thanks for these references, I'll check on them.

hello, thank you for this tutorial, just a question to change the direction mode, we can create a model for the different modes either crab or reverse

I have the 6 channel version of your controller paired with a R4FGMv2.2 receiver with built in gyro. Is it possible have the gyro control two steering servos? My plan is to induce body roll to simulate weight shifting side to side in my drift truck.

@TheTankRC

4 ай бұрын

built in gyro only works on channel 1, and yes you can use a Y splitter to control 2 servos

@HeadBassVTEC

3 ай бұрын

@@TheTankRC if you set your PMIX to Master ST and Slave CHx the gyro should still work with dual servo cars? or not?

Is there anyway of switching between crab and normal 4ws on this handset.

@TheTankRC

2 жыл бұрын

With this remote you have to use the menu to switch between the modes, it does not have a button that enables you to cycle quickly through the modes.

@matthewdorricott4514

2 жыл бұрын

Thanks for the swift reply dude. Awesome video by the way. No messing and all usefully info.

Hey mate can you independently do the rear with the silver knob setup

@TheTankRC

2 жыл бұрын

Yes you can

Can you run two esc this way too?

What about a winch?

@TheTankRC

2 жыл бұрын

You could add a Yeah Racing YA-0528 winch controller and use the momentary switch to control the winch

@AshsRCGarage

2 жыл бұрын

@@TheTankRC what is the momentary switch? I have a Reefs 299LP with built in controller.

@TheTankRC

2 жыл бұрын

@@AshsRCGarage most winch controller needs or require a 3-way switch so you have high Center and low setting. The Yeah Racing controller has a jumper to eliminate the requirements of a 3 way switch and uses a momentary switch that most transmitter has.

@TheTankRC

2 жыл бұрын

@@AshsRCGarage www.yeahracing.com/multi-function-controller-system-for-crawler-winch-ya-0528-00074366