RadioLink Using ID SEED to control 2 different car independently
Ғылым және технология
RadioLink Using ID SEED to control 2 different car independently
Want to send something to The Tank RC to review and see it on the channel? Contact us via the link on the 'about' page
If you would like to help out with my special builds click links below.
paypal.me/TheTankRC?locale.x=...
My Facebook
/ thetankrc
My Twitter
/ thetankrc
My KZread
Subscribe here goo.gl/1W4CZ7
My Instagram
/ thetankrc
Hope to see you on the trails soon.
Thanks for watching.
Like, Comment, Share and Subscribe.
Keep the batteries full and the throttle to the max.
RC Evolution where will it take us next?
#thetankrc #RadioLink # IDSEED
Пікірлер: 51
This may be an older video but you just answered every question I had that brought me here. Thanks
@TheTankRC
13 күн бұрын
I am glad this video could help you. Thank you for stopping by to leave a comment and to watch
Thanks, you explain better than the manual, haven't really understood the aim of the ID Seed until now ... now it opens lots of possibilities ...
you have answered my question on how to bind with multiple cars. thank you very much
Wow thanks man, the blinking and rebinding afterwards is where I was stuck thanks so much you have no idea how much this helped!!!!
@TheTankRC
6 ай бұрын
Thanks for watching, I am glad it could help you
Excellent video, congratulations, the video is well explained.
@TheTankRC
2 ай бұрын
Thanks for the kind words, and thanks for leaving your comment
Perfect, thank you!
Amazing Vid , learned something new and so important and frustrating 2 years after owning this remote
This was very helpful, very well explained. Thank you!
@TheTankRC
13 күн бұрын
I am glad it could help you. Thank you for leaving a great comment
Thanks for ID SEED instructional video!!!
@TheTankRC
3 жыл бұрын
Tell me a problem, thanks for watching.
You are a life saver!
@TheTankRC
Жыл бұрын
I am happy this help
@tbnice9999
Жыл бұрын
@@TheTankRC I was struggling trying to separate the two
Well Done
That’s the video I needed 😮
@TheTankRC
10 ай бұрын
I am glad that is useful to you thank you for watching and commenting
AWESOME video man great job going through thise steps perfectly!! Cant wait to get my other RadioLink RC6GS v3 reciever.
Great ID SEED instructional video brother!
Man this really helped me out......THANKS👍🏽👍🏽
thank you soooooooo much ,
Thanks for taking the time to make this video! I have had this controller for ~2yrs & didn't know this lol. I have 4 cars that I control with it. But I never have more than 1 car with me, I never noticed this before. Now I need to see if this controller has the ability to control the steering such that when I begin to turn the wheels, it starts very slowly but as progress to turn the wheels, it starts to turn quicker.
Exactly what I was looking for, thanks for the video. I was hopping to do that on my 3 RC since a recently get rid of crystal remote and convert to 2.4ghz remote, bought the RC4GS v2 with 3 receivers. Now I do not need to rebind and re adjust all setting all the time. Now got some set up to do. Thanks again.
I need to rebind all my models now :)
Grate n us full hint thanks m8👍👍
great explanation, thans alot
Great explained, it helped me a lot. Thanks for sharing! 😸✌️
A HA.... That's how that works. I got 4 rigs and counting on mine. I was wondering how this works and this explained it well. Thank you Francois. For sharing. Thumbs up from me.. :)
@RcNickster709
3 жыл бұрын
Thanks again Francois. Forgot again.. 6 Rigs and counting
@TheTankRC
3 жыл бұрын
Lol 😂 Looks like your memory is just as good as mine
@RcNickster709
3 жыл бұрын
@@TheTankRC Yup pretty much.. LMAO
@thatoneguy2756
Жыл бұрын
@@TheTankRC if I have already setup 4 cars on the radio, without using the ID seed feature. Can I go back and turn ID seed on, rebind those 4 cars without losing any of the settings? Can I name the model in the ID seed so it matches name in Model list? Subscribed!
@TheTankRC
Жыл бұрын
Yes you can assign a profile an ID seed at any time, no ID seed are only numbers and cannot be changed
Cheers mate very helpful vid saved me a lot of grey hair from the mannal.
Maybe i missed something, whats the point in adding ID1 to model 1 & id2 to model 2? It looks just the same as binding 1 reciver to 1 channel These vids are helping me understand my controller i have the 6ch & Maybe able to do 4ws & switch to 2ws & crab without disabling as you did in other video
So cool! I have 2 crawlers one is a RedCat Everest 10 and the other one i built, its a 313mm crawler i habemt given her a name yet 😊. Im using the RadioLink RC6GS v3 for one crawler and the other crawler im using the redcat RCR-2CE transmitter and reciever. I have the reverse steering kit installed on my RedCat. I ordered the RadioLink RC6GS v3 transmitter qith dual antenna. In order to just use my Radiolink transmitter i just follow your steps?
Thanks for the video ! Very useful ! Quick question : did you try binding the same receiver to 2 Radiolink radios using the same Seed ID. Will that work ? I am thinking to buy a 2nd radiolink radio for my son and equip all my cars with Radiolink receivers. If it is possible to bind 2 radios to the same car, it will be useful as each one of us will have his radio with his settings and can choose any car to drive. Thanks !
@TheTankRC
2 жыл бұрын
I am not sure but I will try it, I do have two radios here. Once I do I will post the video, thanks for the question.
Does flysky has similar Seed ID function?
Can you assign a switch, so a quick flick from one car to the other?
@TheTankRC
Жыл бұрын
no you cannot, you have to go into the menu select model and scroll to the model of your want.
Dos this only work on the radio link v2 not the v1 m8
Well.. easiest way would be just Turn On one car at a time. I don't understand why you would wanna leave one car ON while driving another car. I guess maybe for different situations?
@getonitnow
9 ай бұрын
Because some might have a boat that's upside down, this way you could send out another boat to rescue it, without the motor going flat out on the upside down boat and such. Also if sailing more than one, you can leave one in the water still powered up while running another boat round
@yinghaotan5884
5 ай бұрын
That's right, ID seed function is really good for more than boat. Any idea does flysky GT3C has ID seed function?