Raw Data Flying: Approach, Go Around and ILS Landing | Real 737 Pilot

Ойындар

In this video I'll show you how to fly an approach, go around and landing raw data in the 737NG.
If you like my videos please consider supporting my channel:
www.buymeacoffee.com/737NGDriver
And if you really love the videos, consider becoming a Patron:
/ 737ngdriver
Tools and addons used in this video:
OBS Studio
paint.net
Nvidia Shadowplay
My system specs:
Intel i9-9900k@5,2GHz
RTX3080Ti
32GB RAM
Windows 10 Pro
My hardware:
Thrustmaster Boeing Yoke and Throttle
Thrustmaster HOTAS Warthog
Thrustmaster Pendular Pedals

Пікірлер: 24

  • @splagyetsi3287
    @splagyetsi32873 ай бұрын

    As an experienced B737 pilot I thought your demonstration was realistic. I would suggest to newcomers or less experience pilots to pause the sim. Make the changes which would normally be done by the (Pilot not flying) and then release the pause. This will help to make the flight more like a real simulation. No one can fly raw data perfectly without help from the other pilot.

  • @nicocabres
    @nicocabres Жыл бұрын

    Your videos are amazing!🙏🏽

  • @Barrickade89
    @Barrickade894 ай бұрын

    Thank you for showing what RAW data looks like in the 737!

  • @A330Driver

    @A330Driver

    4 ай бұрын

    You're welcome!

  • @bobhatcher5505
    @bobhatcher55057 ай бұрын

    WOW! Great stuff!

  • @philipplazarou981
    @philipplazarou98110 ай бұрын

    Dear Manuel thank you for your video. Could you possibly make tutorial how to intercept radial from NDB/VOR or make ME arc using MCDU on Fenix A320!?

  • @andyboothy
    @andyboothy Жыл бұрын

    The PAD DME is rather important unlike what you state. Be careful with the DME setup for the missed approach. The PAD DME is used for the missed approach turn, but if unserviceable can be substituted by the DME element of the IPLEasterly not the IPLWesterly which is tuned for the approach part only. Nice attempt but a check ride fail.

  • @Peter_M
    @Peter_M Жыл бұрын

    19:32 you have tuned IPLW and MISS approach has DME for IPLE or PAD

  • @Ronald9540
    @Ronald95407 ай бұрын

    Great video! Yesterday I flew the LOC Y approach into BGSF RWY 9. I messed up my FMC outbound leg from the NDB and wanted to continue by raw data. However, the outbound leg doesn’t give a distance, only extend the holding leg by 2.5 minutes. But 3 minutes at 250 kts (max allowed hold speed) will give quite a difference from let’s say 160 kts approach speed. How would you fly this outbound leg? At approach speed (eliminate the need to slow down on the inbound leg, and reduce distance for terrain clearance), 250kts as max speed giving most distance, or 17nm as that is the distance specified in the inbound leg?

  • @kevinnayis3399
    @kevinnayis3399 Жыл бұрын

    Great video! One question, why did the adf needle not show up on your VOR rose? Or do you have to use the analog one?

  • @A330Driver

    @A330Driver

    Жыл бұрын

    Hi Kevin, it did show up during the later stages of the approach when I've been closer. We can thank Navigraph for this behaviour. In real life you'd have gotten it much earlier as well, but Navigraph restricted the reception range of the navaids to the assured range from the AIP. Which is incorrect behaviour. I had written them about this a few times already, but they never changed it. So let's say if the ADF is guranteed to work ie only within 15NM then in real life you'd get an indication further out as well, which may be a bit inaccurate though (often isn't... but it *may* be), in the sim the needle will only come alive at all at 15NM.

  • @ardeleantudor3635
    @ardeleantudor3635 Жыл бұрын

    Just a few hours until i get the thrustmaster boeing yoke, btw great video!

  • @A330Driver

    @A330Driver

    Жыл бұрын

    Let me know how you like it!

  • @ardeleantudor3635

    @ardeleantudor3635

    Жыл бұрын

    @@A330Driver Its amazing!!

  • @fortel7939

    @fortel7939

    Жыл бұрын

    I would love to buy it but it's expensive :O One day haha

  • @ardeleantudor3635

    @ardeleantudor3635

    Жыл бұрын

    @@fortel7939 It might be pricey, but you get A LOT for that money

  • @Rhinozherous
    @Rhinozherous Жыл бұрын

    Thank you for the awesome tutorials! Can you do one about the IAN?

  • @A330Driver

    @A330Driver

    Жыл бұрын

    I think I did already, are you sure there is none? On my mobile right now so I can't really check the channel to make sure.

  • @Rhinozherous

    @Rhinozherous

    Жыл бұрын

    @@A330Driver I could not find it... will look again!

  • @b3njroverr67
    @b3njroverr67 Жыл бұрын

    Please do a single engine go around video. Maybe a v1cut followed by a return for a single engine ILS and a go around from it or an rnav and go around altho i have tried it i think the logic in the SE go around might be slightly skewed, i am not typed on the plane but passing thru acceleration height i assume you bug up to accelerate and clean up the plane, and with no auto throttle FMA left to right should be somthin like (empty field/ lnav or hdg sel/toga) but what i noticed is that when you bug up toga WILL NOT command a lower pitch which i believe it should. It does however in a V1cut scenario, but not in a SE go around it wont do it. U are typed on the plane you know better tho. Cheers

  • @user-lz2mt5nc9e
    @user-lz2mt5nc9e Жыл бұрын

    15:33 Was that gross weight subtracted with 4 to get the approximate thrust setting?? Thanks

  • @A330Driver

    @A330Driver

    Жыл бұрын

    Yes sir! For a Flap 30 landing. Flaps 40 just take the GW. Weights in tons, not in pounds!

  • @1chicoo85
    @1chicoo85 Жыл бұрын

    Hey! How do u turn the course and the minimums fast, mine takes an eternity

  • @A330Driver

    @A330Driver

    Жыл бұрын

    As described in the livestream: Left mouseclick (and hold) while scrolling at the same time.

Келесі