Quick Tips for Installing a DIY Natural Gas Fire Pit

Тәжірибелік нұсқаулар және стиль

Building you own Natural Gas fire feature, whether it be a fire table or a fire pit, can be both a lot of fun and a bit intimidating when starting your project. We strongly recommend having a licensed gas installer make all of your connections as Natural Gas can be more challenging than propane. We are available both online and by phone to support you and your project and ensure you choose the right items for completing your project. On this page we’ve put together a lot of information we believe you should know going into your project. By having a good understanding of the fundamentals and how they apply to constructing a fire feature will help ensure you build a fire feature which not only looks amazing but operates safely.
PRODUCTS SHOWN IN THIS VIDEO:
Round Burner Rings: www.celestialfireglass.com/bu...
Drop In Burner Pans: www.celestialfireglass.com/bu...
Natural Gas Regulator: www.celestialfireglass.com/fi...
90k BTU Natural Gas Connection Kit: www.celestialfireglass.com/fi...
CSA Burner Kits: https: www.celestialfireglass.com/bu...
CONTACT CELESTIAL FIRE GLASS AT:
support.celestialfireglass.co...
Celestial Fire Glass
6423 English Muffin Way, Unit A
Frederick, MD 21703
(301) 245-7755

Пікірлер: 5

  • @SmithSarah-nq8cv
    @SmithSarah-nq8cvАй бұрын

    Very helpful, thank you

  • @KGSWIMMINGPOOLEXPERT
    @KGSWIMMINGPOOLEXPERT2 жыл бұрын

    hello may i ask what gas required for fire feature??

  • @celestialfireglass

    @celestialfireglass

    2 жыл бұрын

    The most commonly used type of gas used for a fire feature are Propane (LP Gas) or Natural Gas

  • @KGSWIMMINGPOOLEXPERT

    @KGSWIMMINGPOOLEXPERT

    2 жыл бұрын

    Ok ty

  • @JustinHallRunningman1

    @JustinHallRunningman1

    Жыл бұрын

    hi I have a burner kit like the one you are using here as an example. I'm trying to build a circular fire pit within an iron 67cm bowl. I have cut and welded the connector to the iron bowl and I am concerned about heat generation from the pit melting or damaging the supplied rubber pipe as it seems the connections and pipe under the pit get very hot.within say 10 mins... Any advise you can offer would be greatly appreciated. I am also finding it hard to find standard gas QCC type 1 bottles here in Bali Indonesia. Seem all the gas bottles have different standard/ type connector to tank with safety value ( inner ball-bearing) that shuts of the gas as yoy turn higher? Question: Do I need a converter or different system. hope you can help.

Келесі