lil advice to anyone that will be doing caliper swaps, compress the brake pedal after caliper is off, it will build a vacuum on the brake fluid and whatever remains in the caliper/line is the only thing that will leak, just take the floorjack extension bar, and prop it against the seat, if you doing it alone
@Luiscabada1966 Жыл бұрын
I liked and subscribed soldier. Ty very much. 27 yr old daughter said her brakes are “starting to make noise” ty for the guidance . Will tackle with confidence 👊🏼
@nonameisthename1382 жыл бұрын
That was a great job.. someone has a nice Q50 👍
@drjimjam11122 жыл бұрын
Nice clean job. Thanks for the vid.
@tonytieu685 ай бұрын
Thanks for making this video im planning to do same for my 2015 Q50 3.7
@Speedycory62 жыл бұрын
Marz looking swoooole 💪🏽💪🏽
@anthonyalfaro2772 жыл бұрын
Great video bro!
@cre8tivegarage1572 жыл бұрын
Yess more brake power to stop the GOAT. aye those flames out the exhaust go hard. I really need that for my miata.
@nopiatl2 жыл бұрын
Great job.
@HomeIdeasYT2 жыл бұрын
Good job :)
@deezq60642 жыл бұрын
Excellent video
@clippers4me Жыл бұрын
Dam exhaust sounds nice! What kind of setup? Also do you need new brake brackets withe these new calipers?
@MAREAL Жыл бұрын
Great vod!!! Question: what was the torque spec (ft ib) for the rear break calipers?
@ryerci9618
Жыл бұрын
ah, good ol german torque spec, goodntite
@JoseHernandez-ou5ez2 жыл бұрын
🔥🔥
@luisgarduno4093 Жыл бұрын
Awesome video!!! I wanted to know what size rims do you need so the BBK can fit I have a 2014 q50 stock non sport at 17 rims
@overdonelasagna5751
Жыл бұрын
You need at least 18 inch rims.
@przemeknikiel55742 жыл бұрын
hi i liked your movie very much. I would also like to replace the entire set. can you send me a website where I can buy the full set for the infiniti q60
@chrisshore9000 Жыл бұрын
Those old stock calipers and brakes look exactly like my 2014 qx60. Your upgrade isn’t listed to fit. I wonder if it’s because behind the stock rear caliper, there isn’t a lot of room because of one of the suspension bars. Where you can’t even get the lower slider pin out. About how much thicker are these calipers from the back side of caliper to the back of rotor. I think there’s
@LuisC2022 жыл бұрын
What color blue is that? They look nice.
@imDnice Жыл бұрын
Did you use your same impact drill on the rears?
@SeanWells-id3uo Жыл бұрын
What order did you bleed the brakes? I did mine last night and they are squishy
@mehkicremona47622 жыл бұрын
What break fluid did you use ?
@ForsytheConstructionsАй бұрын
Cool Video, but do the Swap works with the q50 hybrid too?
@edimaya2951
Ай бұрын
Yes
@luisangeles735 ай бұрын
Yo where you get that 4th brake light for that g37?👀
@Yookiid2 жыл бұрын
How did you install the fog lights
@cantu9167612 жыл бұрын
Have you ever done a G35 with Q50 front end conversion? If not, are familiar with this conversion? Any info would help on what you think you’d need for that conversion, I’ve seen your 35 to 37 conversion. I just like the Q50 front front end, looks more like a Silvia or R34 to me.
@sonnychiba8838
2 жыл бұрын
G35 with a q50 front end 🤔
@charliecole624
Жыл бұрын
Did you ever do it? That’d be cool
@KingKongDill2 жыл бұрын
what spray paint did you use?
@iDkwHatToNaMeThIS122 жыл бұрын
i wish i watched your video before i did mine. lol
@vincentvalentine9417 Жыл бұрын
Something I want to stress to you guys and to learn from my mistakes, DO NOT try to put the new banjo bolts onto the caliper with it on the car. You can and will strip out the threads of the caliper. Attach the banjo bolts very carefully onto the caliper on the bench as he did in this video. Make sure you can finger turn them too
@itswellmade3616
Жыл бұрын
What can you do if you do
@vincentvalentine9417
Жыл бұрын
@@itswellmade3616 it happend to me twice. One was minor and I was able to put an extra copper washer in order for it to not leak. The other one was too stripped and would leak no matter what so was basically a paper weight or something to use as a core charge
@Statik_G36
8 ай бұрын
That’s wat I’m goin thru rn
@eliassanchez9895 Жыл бұрын
Hey bro did you use the same mounting bolts from the old calipers on the new calipers on the back?
@brooksbrooks8060
Жыл бұрын
Yes as he showed in the video
@williamtaylor3576Ай бұрын
Can they fit a 2017 infiniti q60 base 2.0t as well?
@awpickens1 Жыл бұрын
Where can I buy the akebono upgrade 🤔
@souljaboydun Жыл бұрын
Where can I buy rotors and calipers?
@JazekFTW3 ай бұрын
Aren't the rotors the other way around??? They are supposed to be cooled from the inside to outside and how you did put it at min 9:12 the air gets into the rotor diagonally so it cannot expel the air inside... EDIT: okay my bad the rotors have straight blades not curved ones
@samsullivan49018 ай бұрын
What brake fluid did you use??
@edgaralvarez179811 ай бұрын
Kinda dumb question but where do I find those custom Akebono calipers, I’ve looked and looked but I just see the regular ones
@Allcity323
2 ай бұрын
They just buy the spray paint and then buy the akebono stickers and that’s how they get them like that.. I believe Speed Culture studios did a video where he put a link for that exact paint color and the akebono stickers also
@AJ-js4xi Жыл бұрын
What kinda taillights are those?
@clippers4me2 жыл бұрын
How much are they?
@adrianjaimes142 жыл бұрын
The links and/or descriptions of the parts or tools used would be helpful.
Пікірлер: 61
lil advice to anyone that will be doing caliper swaps, compress the brake pedal after caliper is off, it will build a vacuum on the brake fluid and whatever remains in the caliper/line is the only thing that will leak, just take the floorjack extension bar, and prop it against the seat, if you doing it alone
I liked and subscribed soldier. Ty very much. 27 yr old daughter said her brakes are “starting to make noise” ty for the guidance . Will tackle with confidence 👊🏼
That was a great job.. someone has a nice Q50 👍
Nice clean job. Thanks for the vid.
Thanks for making this video im planning to do same for my 2015 Q50 3.7
Marz looking swoooole 💪🏽💪🏽
Great video bro!
Yess more brake power to stop the GOAT. aye those flames out the exhaust go hard. I really need that for my miata.
Great job.
Good job :)
Excellent video
Dam exhaust sounds nice! What kind of setup? Also do you need new brake brackets withe these new calipers?
Great vod!!! Question: what was the torque spec (ft ib) for the rear break calipers?
@ryerci9618
Жыл бұрын
ah, good ol german torque spec, goodntite
🔥🔥
Awesome video!!! I wanted to know what size rims do you need so the BBK can fit I have a 2014 q50 stock non sport at 17 rims
@overdonelasagna5751
Жыл бұрын
You need at least 18 inch rims.
hi i liked your movie very much. I would also like to replace the entire set. can you send me a website where I can buy the full set for the infiniti q60
Those old stock calipers and brakes look exactly like my 2014 qx60. Your upgrade isn’t listed to fit. I wonder if it’s because behind the stock rear caliper, there isn’t a lot of room because of one of the suspension bars. Where you can’t even get the lower slider pin out. About how much thicker are these calipers from the back side of caliper to the back of rotor. I think there’s
What color blue is that? They look nice.
Did you use your same impact drill on the rears?
What order did you bleed the brakes? I did mine last night and they are squishy
What break fluid did you use ?
Cool Video, but do the Swap works with the q50 hybrid too?
@edimaya2951
Ай бұрын
Yes
Yo where you get that 4th brake light for that g37?👀
How did you install the fog lights
Have you ever done a G35 with Q50 front end conversion? If not, are familiar with this conversion? Any info would help on what you think you’d need for that conversion, I’ve seen your 35 to 37 conversion. I just like the Q50 front front end, looks more like a Silvia or R34 to me.
@sonnychiba8838
2 жыл бұрын
G35 with a q50 front end 🤔
@charliecole624
Жыл бұрын
Did you ever do it? That’d be cool
what spray paint did you use?
i wish i watched your video before i did mine. lol
Something I want to stress to you guys and to learn from my mistakes, DO NOT try to put the new banjo bolts onto the caliper with it on the car. You can and will strip out the threads of the caliper. Attach the banjo bolts very carefully onto the caliper on the bench as he did in this video. Make sure you can finger turn them too
@itswellmade3616
Жыл бұрын
What can you do if you do
@vincentvalentine9417
Жыл бұрын
@@itswellmade3616 it happend to me twice. One was minor and I was able to put an extra copper washer in order for it to not leak. The other one was too stripped and would leak no matter what so was basically a paper weight or something to use as a core charge
@Statik_G36
8 ай бұрын
That’s wat I’m goin thru rn
Hey bro did you use the same mounting bolts from the old calipers on the new calipers on the back?
@brooksbrooks8060
Жыл бұрын
Yes as he showed in the video
Can they fit a 2017 infiniti q60 base 2.0t as well?
Where can I buy the akebono upgrade 🤔
Where can I buy rotors and calipers?
Aren't the rotors the other way around??? They are supposed to be cooled from the inside to outside and how you did put it at min 9:12 the air gets into the rotor diagonally so it cannot expel the air inside... EDIT: okay my bad the rotors have straight blades not curved ones
What brake fluid did you use??
Kinda dumb question but where do I find those custom Akebono calipers, I’ve looked and looked but I just see the regular ones
@Allcity323
2 ай бұрын
They just buy the spray paint and then buy the akebono stickers and that’s how they get them like that.. I believe Speed Culture studios did a video where he put a link for that exact paint color and the akebono stickers also
What kinda taillights are those?
How much are they?
The links and/or descriptions of the parts or tools used would be helpful.
@edimaya2951
2 жыл бұрын
www.z1motorsports.com/z1-products/z1-motorsports/z1-q50-q60-akebono-sport-brake-upgrade-kit-front-and-rear-p-9892.html?list_name=SearchResults&oid=9892%3A0%3A7%3A15&qid=af30d43ec676bb6675ca945ba944d442
Where you got the rotors from?
@irfanbutt935
Жыл бұрын
Z1 motorsports
New rotor size ?
I just bought some akebonos and I want to install myself but I’m not familiar with bleeding the brakes any help?
@przemeknikiel5574
2 жыл бұрын
can you send me a website where I can buy the full set for the infiniti q60
This was way easier than my g 😭
Dam that looks like my non mechanic ass can do that job.
What router is that?
Where are you located?
we like your video and want to invite you to review the Infiniti Q50 product. Would you be interested in it?
This should be labeled “Not for a Q60 or Q50 brake upgrade “
@JonathanMartinez320
Жыл бұрын
Why?