Just in case it hasn't been mentioned, Crysis required a card with at least 256MB of VRAM and 1GB minimum. Recommended is 512MB/2GB respectively.

@Synthematix

6 ай бұрын

It also required very high clockspeeds

@dshadow01

4 ай бұрын

The issue wasn't VRAM specifically The cards probably didn't have the required instruction sets. I'm guessing Crysis needs pixel shader 3.0

@bigsnyder01

4 ай бұрын

@@dshadow01 You might be on to something. Crysis requires shader model 2.0, but recommends 3.0. The Geforce4 Ti supports version 1.3. The Radeon 9200 LE tops out at 1.4

@devaraft

3 ай бұрын

LTT video from back then shows that to push the best graphic it consume 3GB VRAM

@Interesting-pfp_I_Have

Күн бұрын

@@devaraft Did you snorted something? You got the good stuff innit?

Collin, you have no idea how this video made me feel tonight. Back in the 1997-2005 era I used to have my own custom PC shop and these parts were my day to day thing and I just felt like I was there, 25+ years ago doing a custom built for a client. Love it. You just made me feel young again by looking at old stuff haha. You are the best. Love the content. I might start my own retro build. Thanks again.

@sennthemanwin98

11 ай бұрын

Happy to keep older stuff alive, great to see them awaking from a long time.

@slvclw

5 ай бұрын

I hear ya. I built at 486 and now I’m building 6 more haaa

I love this period of building, this is abotu where I got on the PC bus. Really brings back memories. One of my cable management tricks for this era was to put the optical drive in the second slot down from the top and use that space above it to store the "extra" power leads off the PSU. Helped keep the clutter down. I love the knockoff platinum and candy plastic aesthetic of this era, it really did have some character. And that light mod? Perfect. Needs a neat case badge now too.

@IvanIvanov-ni4rs

Жыл бұрын

And the DVD drive really does fit nicely with the case.

Love the little light mod at the end, look forward to seeing more of this machine.

@SteveMaves

Жыл бұрын

Glad I stayed to the end!

An alternative to cutting the 3 pin power LED header is using a pin to release the pin from the plastic header, and then move it to the 2nd position. Or you could remove both of them, and use a 2 pin header instead.

@fluffycritter

Жыл бұрын

Came here to post the same thing. It’s way safer and easier IMO.

@psilimit

Жыл бұрын

I came to the comments to say just this.

@kelvinstokes996

Жыл бұрын

Truth told, cutting the connector was an extremely common of-the-era technique. I did the same thing literally hundreds of times while working at a small computer shop in 2000-2001. You had to bash together a PC in about ten minutes: there was no time for fooling around re-pinning connectors!

@judenihal

Жыл бұрын

It's also a waste of a retro case to modify the cables that came with it!

@tobias1170

Ай бұрын

Came here to write the same. Cutting the plug while you could just move the contact to the middle pin is pretty barbaric.

I love watching videos of how to build PC's from "way back when". All I'm remembering fromy my days of doing, it are ripping my fingers to shreds taking out the breakaway expansion slot covers, and for the fingers that I didn't destroy, I'd get those cut up by putting the expansion audio, and graphic, cards into place! Ah those were the days. Brilliant to see this video, and the components have stood the test of time.

“Swoosh..” is a great forgotten word I’ll be using in casual conversation from now on…

Try adding a 100-330uF capacitor in parallel to the fan power pins to see if it will spin up - it's a trick the 3d printing community uses for Noctua fans.

@JamieBainbridge

Жыл бұрын

That's genius. I need to remember this.

@JamieBainbridge

Жыл бұрын

@Timothy Hoogland I'm DEFINITELY not an electronics expert, but I think it works like this: The low voltage supplied is not enough to start the fan, so the fan has large resistance and the capacitor charges. The cap then discharges and starts the fan. The fan then falls to much lower resistance and so most future current goes to the fan. Maybe the cap occasionally charges and discharges, but one is able to run the fan lower than 100%. If you know more than me, feel free to explain. I'm hopeless at circuits and components.

5:37 the DOF zoom changing the focus on each connector as you progress from right to left across the ports... brilliant. I'm subscribing just for the cinematography of that one sequence.

I heard and read horror stories about the IBM hdd manufacturing plant here in Hungary. Because of the low wages the really low-end of the working class wanted to work there. I heard that some of them were smoking (!) in the clean rooms, and putting the cig butts off in the still opened drives. Crazy times...

@skieinc

Жыл бұрын

Wow, I did not know these IBM drives were manufactured in Hungary. This comes as a surprise. I remember having an IBM drive back in the early 2000's and it was actually smoking. But as far as I can remember, it still worked. 😅😅

@talos86

Жыл бұрын

@@skieinc HP machines and printers are made too in Hungary till' 2005.

@kebab_hill

Жыл бұрын

@@skieinc it's also said on the Hard Drive itself 11:43

@brostenen

Жыл бұрын

20gb IBM are solid. 40gb and 80gb are crap. And then IBM sold to someone. Hitachi or something. And their first 80gb's were good, yet noisy. They just solved stability and toughness before looking at noise.

I miss when it briefly fashionable to just stick translucent turquoise on every computer thing, even otherwise typical beige boxes. Turquoise is one of my favourite colours, and I have to wonder if that would be the case had I grown up a few years earlier or later than I did. I think Windows 98 and various vintages of Linux would be pretty interesting! I also have a hunch that the driver program might work just fine the second time round, though of course it could be even worse! Those re-usable knockouts are nice though, especially since it doesn't really cost them anything else in production to slightly alter the shape they punch out - but it helps the end user dramatically.

@tommynobaka

Ай бұрын

It reminds me of the fish bowl aesthethic of literally everything. From hand soap bottles to shower curtain lmfao. Some type of pastel fish bowl aquatic vibes

love your videos. Found and started with your first minidisc video last month during a tough time and it got me through it. please dont ever stop!

I also worked in a small computer shop at the turn of the century, and this is almost exactly the kind of PC we would build for the customer, or they would build for themselves, with parts from us. XP, despite its lousy WiFi support, was a very solid OS, which made most tasks a breeze. They didn't call XP the 'F1sher Price' OS for nothing! :D

I love the light on the front of the case. Beautiful build.

The ATI 9200 was the first PC component I ever purchased when I was first learning PC hardware in the early 2000s. I recently picked one up on ebay to put in a shadowbox (non-destructively). Really takes me back. Thanks for the walk down memory lane!

@DioBrando-qr6ye

11 ай бұрын

Me too. It was the GPU of my first custom built PC (although mine was the low profile version). Isn't it funny how he went out of his way to put a Nvidia card in this PC? KZreadrs can't help themselves, it's as if they allergic to ATI/AMD or something. Maybe they think that using an ATI/AMD card will make them look poor.

I had that exact same case for my main PC back in the day and I've been looking for one now for YEARS to do a retro build in. Nice work building that thing!

@matrixcodex

Жыл бұрын

And that was my same EXACT processor, P4 2.4c wow you literally built my PC haha

@MaxHarrison

8 ай бұрын

Same here, I had a PC with this case back in 2000. Did you ever locate one?

Great video! It's so nice how clean your case is. I love the light mod you did too... I'll have to borrow the same idea for mine. And thanks for the tip on the TDK drive, I think I need to grab one too.

I LOVE this video. I remember fondly when computers had this aesthetic, and I can't believe you got such a beautiful new case. I 100% would've gone for W98, though. Everything in this system screams it: socket 478, AGP, CRT monitor, the case... I wish I had such nice hardware for my W98 machine. Greetings from Mexico, from a fellow retro machine enthusiast.

I miss those cases😢. Thank you for such amazing videos❤

Thanks, I enjoyed this blast from the past. I'd forgotten about those rounded IDE cables, they really improved the look of my builds.

So satisfying to see! I worked in a computer store in the early 2000s and built many P4 systems. Exciting time with all the changes and developments. 20 years later I'm still into computers and testing new components on a regular basis.

I love this build. I love the aesthetic you went with. Right up my vaporwave loving alley

Congratulations on a decent retro-thingie build. Subed & upvoted. Looking forward to more with this rig.

Man, this video hit all the nostalgia buttons for my life right after college. Cases with a ton of fans, side panel window and interior lighting mods, such a fun time. I think I spent more time over clocking and Tweaking then I did playing sometimes.

Nice build! This era is my favorite of the entire history of PCs.

@SeeJayPlayGames

Жыл бұрын

me too, although I was busy with AMD Athlon XP chips and not P4's...

I simply love your voice. And I'm a huge geek. Cannot get enough of your channel, Colin. 💙

I never was a fan of the Apple colours, even when every other manufacturer copied them. I was firmly entrenched in the "being black makes it faster" camp. Although that CD drive would look sick with LED illumination (I don't think it would screw with reading the disc since the laser is IR)

@volvo09

Жыл бұрын

Yeah, I wasn't a fan of that design either. Especially in consumer products where everything had to look "melty" or like it was designed in a wind tunnel. Like an mp3 player? Can't just make it a rectangle, have to make it all curvy and weird. I was actually thrilled with the iPod because it looked normal to me.

@DioBrando-qr6ye

11 ай бұрын

If I'm not mistaken the black PCs came after the Apple colored ones, before that it was all beige.

That disc drive and case combo... I'm drooling over here.

@frstwhsprs

Жыл бұрын

Maybe it was just me, but the shade of blue on the disc drive doesn't fit, but alas, it does look so good.

I built so many systems exactly like this, also working in PC places in 99 to 05. This was like watching a video replay of my own old memories. Quite a strange experience.

I love it. Nostalgic, I was doing this on a daily basis in Mombasa from about 96 - 2002. The small square in the front was meant for custom 'branding'. Good times.

Nice build! Very cool mods&additions!

Having built several retro PC's, finding a period correct case has always been the most challenging, since most got tossed because they take up a lot more space than the rest of the hardware.

@nalinux

Жыл бұрын

I used some to fix car body :)

I used to have one of those TDK drives and I LOVED it! I was so sad when it started to malfunction.

We had this case growing up. it was my favorite "family pc" from the 90's. I still have the case, tho its pretty beat up now, I'm pretty sure we purchased it from MicroCenter in Saint Louis Park the summer of 1999, during the launch of the Athlon 1GHz cpu's. I remember that pc's specs well, even though I was only 12 at the time. I really wish I had seen free geek had a new (old stock). I've actually been searching for a few years to find a better condition case than our old one. That is a super special find you have there, I really hope you take great care of it.

brings back memories. Thanks for the vid. I worked a e waste day for a affluent city in the early 2000s and I had a field day. Still have a Antec case that I need to see I I can do a build similar

What a great video! Well done, sir!

Omg i have this computer case too and I love it so much! Glad to see another person out there with the same one!

Great video, love the look of this. One of my work colleagues gave me a 'Cube' pc which I recently stuck an AMD video card in and a Pentium 4, great for my 'Vintage' games, love your videos Dude, always informative, instructional and entertaining. And its thanks to you that I now have no fear of taking laptops apart and repairing and upgrading them.

Such a good build. I had that same TDK drive with my translucent blue Antec ATX case. I wish I had that still.

Love it. You are spot on about using a driver to get those standoffs installed. Also, missing the IO plate is the worst! 😄

Totally forgot I had this case. The added lighting is awesome

Had this case as my first computer build. Thanks for making this video! Looking forward to future updates. Mine had either an EliteGroup or Asus motherboard, AMD Athlon 1800+ cpu, 512mb ram, the Western Digital 80GB hard drive you showed in the video and a Nvidia GeForce 3 Ti200. Wish I still had it to mess around with! Thanks again!

@Hadisabetghadam

11 ай бұрын

asus has better Becuase asus still hosting drivers for old motherboards

As always - the content is awesome. Thank you very much

wonderful video! That Pentium 4 era takes me back to the first pc that I helped build as a kid, kinda wanna build one now haha

What an awesome build bro. I love it! I want to build myself a retro PC as well soon.

OK, just saw the front panel light on the front of the case at the end of the video. That rocks. I have an old Antec case from that era, arguably a better case, but man doesn't have that awesome bling on the front!!

Your videos feel like visiting a zen garden. 21 minutes of raking sand. 10/10

I had Radeon 9250 at some point - shitty card. It was in a new PC my Dad got me. I couldn't wait to change it to something supporting Direct X 9.0c. I upgraded to GeForce 6600GT afterwards. This started the whole GPU craze I still have ongoing. Such a great card and so many great memories with it - pure nostalgia! Cheers for the great video!

Lovely build that mate!

I had that exact same case. Man, that brings me back.

Great vid as usual! You finally have your own vintage PC. With the Intel mobo its so average I'd name it "Not Sure". I have a few 1TB Samsung Spinpoint F1 RAID-class HDDs that have been spinning for over 83,000 hours. This was right before Samsung sold their HDD storage division to Seagate so I guess it was a last hurrah for the engineers. Good thing the 7-year warranty was never necessary.

Good video. First time watching a youtube video from start to finish.

Man this takes me back. I was rocking an Athlon XP1800+ and GeForce 3 Ti 200 back in those days. A very solid combo that powered many late gaming nights. Even had that same Sony Trinitron monitor which was absolutely glorious.

@vvlist

Жыл бұрын

I had the case in this video and that CPU/GPU combo. This video is a crazy flashback for me! I even had that 80GB Western Digital.

This brings out memories! I had my own "PC shop" in the late 2001 and throughout 2002! Most customers back then had no idea what to look for in computers. So, they were running after prices only! Shops were competing to build the cheapest computers running the glorious Pentium 4 and Windows XP! That era saw the wide spread of SW piracy and HW counterfeit! CPUs speed were faked to appeal to the customers. I even heard of some tricks to alter the amount of RAM readout during boot! I refused all those trickeries and chose quality, specially being a computer engineer myself. The market did not go as I hoped and the junk from china kept flooding the market! I closed the shop and switched to real estate business and never looked back to the computer market again!

Oh wow! That takes me back. I had that case back in the late 90s.

@mpettengill1981

Жыл бұрын

I had the smaller version (half the exterior drive bays). I absolutely remember it having that same aqua accent panel and buttons on the front. IIRC I bought it in 2000 or 2001 for a build. I didn't have it for much more than a year or so - probably sold it to get some cash to move on to something better.

Great video! I had that exact same TDK CD burner! I upgraded the one I had in my Compaq Presario 7000.

Awesome video dude!

Nice build, neatly mirrors specs to my own in 2002. But for my money today, I would have to go with a 2004 themed build with a 800mhz fsb P4, 865 chipset board, and dual-channel ddr-400 ram. Getting up to the 9600/9800 ati cards or the much newer nvidia 6600/6800 agp would also be a great move, but I saw prices of those cards today is eye-watering.

@SeeJayPlayGames

Жыл бұрын

not surprised, since few people had those higher-end cards at the time. I had a 9600 but never a 9800/6600/6800. I had a 5600, though. Maybe Crysis will run with 128MB? Or would you need 256?

loved the video man. first pc i ever built was a socket 478 p4 i got from new egg. think i had some cheap lil msi micro atx board also. believe it was red so i of course loved it being gosh like 9 years old i think. thanks for the nostalgia. my papaw taught me how to build pc's so this brought back alot of good memories.

I had that TDK CD burner installed aftermarket in 1999ish HP pavilion. The desktop included a Zip drive, which I loved. I believe I installed it in 2001. It was great! The software was solid also. Good times.

That’s awesome, nice work.

was just digging around on an old XP pc i have in the basement. Brings back a lot of memories, some of those old programs like PSP Converter, Deep Burner, Flock, Yahoo Messenger, AIM, MSN, a saved Myspace html folder, tons of stuff. Did anyone else use Omega drivers for their Radeon card back in the day? Optimized for gaming and always worked better than stock ATI drivers.

That CD-R drive with the peel still on was a great score.

Next time you use Snappy, be sure to use the Origin one, and check every component hovering your mouse while pressing ctrl. So you can compare time and release version between your current driver and the new one, since the system is automatic and sometimes misfires and installs the wrong one (ex. Intel often signs new drivers in the year 1968)

@ss95248

11 ай бұрын

is there a reason for this? 1970 is where most systems seem to have a cutoff so i'm trying to see if there's a connection here

I've got that exact same case. Actually I got four! Some are more yellowed that others, and the teal piece becomes slightly green due to the color mix. I've had one working 24/7 for over 10 years at my work place running XP, and it will now become a retro machine for Windows 98/2000 era games and software 🙂

For missing I/O shields, I use Plastic Canvas or I 3D print a universal one shield. With both these methods, I just cut out the little squares to match the I/O. Plastic Canvas is a grid that is used with yarn to make craft projects.

ah man, the AGP connector, I feel old 🤣 beautiful build, that translucent blue tray in the cd reader is just FANTASTIC

Great build. Looks fantastic and perfectly 2002❤

Beautiful PC, I love it.

Great build!

I Used to have that case as my workhorse up till 2008, I really liked it.

weird enough I have that same motherboard that I just got parts to fix. except mine is slightly older and has 3 ram slots of ddr1 memory. awesome to see someone have a motherboard like mine!

This combination of hardware would make a blazing fast Win98 retro box... You should go more recent for WinXP.

17:40 I like how that "wow" sounds like the one that was given when the bsod happen during the Windows 98 live demonstration with Bill Gates in 1998 (search for "windows 98 bsod presentation" if you want to know more)

@geekehUK

Жыл бұрын

I'm reminded of the South Park movie "f*cking windows 98, get Bill Gates in here!"

I had this case back then and had P1 in it... man those memories

I love this video. Istlll have my old p4 3.0ghz in a Chieftec case with 2gig corsair ram 200gb Seagate sata, liteon cd writer, and a 7800gs such hard nostalgia!

Nice ending with the front case light.

I also owned this exact case. That teal cover pops off. I put some leds in there back in the day

Oh the Memories! I bought a pre-built machine very close to this in 2003! It was from a Mom & Pop computer shop and had been built for another customer that for some reason never came to pick it up... I remember playing DOOM 3 on it beautifully! Later on, I was able to get Guild Wars and World of Warcraft running on it as well. I'm more of a Linux/MacOS kind of guy today, but I do miss Windows XP! It was probably my favorite version!

I also worked at a computer store here in my country that used to ship this case rebranded as Mercury/Kobian and they had a good quality finish and lots of other models👍

I love this video/PC so much, it's so, so similar to the system I had back then! Back in its day, I bought the same CPU 2.4Ghz. I had a very similar motherboard, Intel with the i845 chipset that supported the 533mhz bus. But I also had an nVidia Ti 4400, one step up from the 4200 you used. It was an absolute beast back in the day. I had to sell it for finacial reasons, but when I bought my next PC (AMD Sempron 3000+) I had an ATI 9200 in that! The Ti 4400 was around $550 AUD at the time, and the 9200 was about $120 AUD when I bought them. I remember this early period of the 2000's so well because I had so much fun buying and building PC hardware.

I LOVED the 4200Ti and that Microsoft mouse! This brings back good memories.

My first self-built PC was an Athlon 900 system built in the full tower version of that case, it really brings back memories. You were very diplomatic though, the case had some of the worst airflow I'd ever seen. I recall removing that front cutout as you did, but I also drilled a 120mm fan hole in the side panel over the CPU. This was years before they'd become standard with the cone setup.

Ooof now this is a serious flashback. I had both that case and the VeloCD back then.

Nice build. The only thing I probably would've changed is that I would've cut out that fan grill first and filed down the sharp edges before installing the mainboard. But I'm not sure what they thought back then not stamping a bigger hole in the metal and were the fan should pull air in anyway. For upgrading I would suggest an Geforce FX 5900 XT. A very popular card at the time, more reliable than high end Radeon 9000 cards (they need a bit of maintenance from time to time and most people didn't give a thought to that so getting a working Radeon 9000 card can be a real struggle at that price point) and could be found for quiet cheap in retro terms these days at least.

Very nice video. Thank you

WOOO this case was top notch, with AT shield, thats amazing.

That first boot with the cpu thermal warning was an ominous warning since I've had boards from that era with failed thermal diodes that would read at 100c at first boot so it made entering the bios to turn its cooling protection off almost impossible.

So weird seeing that "swoosh" case again. That was the case on the PC I used for years, from 2002 to 2009.

my man! i have this exact same build - even with a curvy designed beige case (mine looks like a nokia phone hah)! The intel d845 is a pretty stable board, the 2.4ghz P4 is solid as you mentioned and a geforce 4 ti4200 is the icing on the cake. I am using an SSD instead of spinning and went for Winows 98 instead of XP, just because I wanted something that could play any 1998 to 2001 Win9x game with ease. love that light on the front! thanks for the great video.

Rounded IDE cables! I had completely forgotten until now that back in the day, i separated the lines in the IDE ribbon cables by hand and duct taped them together to simulate the air flow of the rounded ones. I probably read about it on slashdot or something.

The combination of Pentium 4 and beige/blue case is just perfect. So iconic!

genial ese final. gracias!!!!

I had the same case I my very first computer back in 2001, it was a Pentium III 600mhz with 128mb of ram. What memories

I liked the invisible speakers you hooked up to your Soundblaster Live! the best. They really complement your setup! ;-)

Yeah, that's a pretty case, clean design... - turns on the light - I WANT IT!!!

Love it - great video as always 🎉 I remember building in those cases and having numerous cuts on the fingers with that sharp aluminium everywhere lol One trick is to sand/file down particularly where you tin snip. You will thank yourself later if you revisit and forget how sharp it is :-)

That’s a cool computer build, I wish you put a DVD drive since you put a floppy drive and a Zip drive! That’s a great machine to play those games that were on CD rom and floppy disks!

Nice PC! It remembers me of my first PC build, a P4 4.0 gHz with hypertreading, 4gigs ram and a nvidia FX5500, that machine was a blast to use, being able to push 60 fps on the original Doom 3

My first 3d accelerator was in that exact case so this invoked much nostalgia.