Putting Hubs and Tall Tires in the Poulan and Getting Muddy and Hit New Top Speed!
Автокөліктер мен көлік құралдары
In this episode, I picked up some hubs for GoPowerSports.com and put on some tall mud tires. Also hit a new top speed!
The link for GoPowerSports.com:
www.gopowersports.com/?...
link for the hubs: www.gopowersports.com/3-4-all...
Please consider supporting my work with Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching.
Пікірлер: 171
I can't believe the added speed and seemingly power you can add with just a 50.00$
This looks sick, it’s unbelievable the places these mowers will go, I haven’t even put new tires on mine yet and it’ll go damn near anywhere I want it to
Thank you.....I was wondering how to get just hubs not the whole atv set up ....this is awesome
@chud327
Жыл бұрын
These hubs came from gopowersports.com. thanks for watching
@bleepers3
Жыл бұрын
@@chud327 ya ...I'm Canadian and currently waiting on my unemployment insurance to kick in then I'm actually ordering a few things from that site I have it saved lol. And they have amazingly cheap prices, I was expecting to see 80$ plus for one but not they have hubs from 20$ and up. I truly am happy that I seen this video and if I can leave a note to the company when ordering ill make sure they know I seen your video
Yes! I've been waiting for this for so long
Great job brother,looks tough,great idea.
I can see your boy's point- the Murrays do have clean classic lines. Agreed. But for me, in your growing arsenal of mud machines, it always comes down to basics, the look of power, strength and authority... and how everything came together perfectly. I'm talkin' about Colonel Craftsman of course! What a tough, tough machine :)
Nice build the poulon looks really good and great video as always
I watched this video again. It's so cool. Chud you are super smart. You can fix anything. And make anything. I wish you live closer to me we'd hang out all the time. Rideing in mud holes. Building mud mowers. We'd be the cool guys. Love your content.
Love the way the rear tires turned out!
@chud327
3 жыл бұрын
Me too, look good, more clearance, higher top speed... I should have done this sooner. Thanks for watching.
I though the mud was going to get the best of you, but then you prevailed .👍 Looking good. Stay safe, Joe Z
It’s like the craftsman now 12in wheel in the back, looks cool man keep em coming!I just posted a video of my buddies mower that we’re doing
@chud327
3 жыл бұрын
Will do and thanks for watching.
Hey Chad. I would like to see a 4x4 mower build or a 4 wheel steer one that would be awesome 😊
@chud327
Ай бұрын
Me too, as soon as I find a rear steer rear end..m thanks for watching!!
You should check out Offroad Mudmowers video on how to modify a transaxle to go 50+ mph. Thanks for uploading!
That mower has taller tires that my 4 wheeler now😂
@chud327
3 жыл бұрын
Fun and thanks for watching.
Imagine what that thing would look I like with duallys on the back 😮😏
@Lukeluzier86
2 жыл бұрын
@Samuel Wilson I think he meant with the new wheels and tires
I know it’s a old video but putting taller tires on the front will benefit you more than you know
Ever thought of raising a mower quite high and putting massive wheels on it
@chud327
Жыл бұрын
I have and thanks for watching
I love gopowersports, they should sponser you. im about to buy a bunch of parts from them. they never cease to amaze.
@chud327
3 жыл бұрын
Be sure you tell them I sent you, maybe someday they will sponsor me:) Thanks for watching.
@quadshopcustoms1228
3 жыл бұрын
@@chud327 its their loss if they dont sponsor you.
Nice!
@chud327
Ай бұрын
Thanks for the multiple watches and for the comments! Love that!!
Now you just need to lock it and make some fenders for it and it's perfect. I would make sure you run high air pressure in those back tires or that transmission isnt gonna last very long (because the tires grab so good) I had 25x12-9 mud tires on my mud mower and I ran them flat because they leaked, and they grabbed awesome and I never got stuck, but let's say it's no longer a 6 speed any more😂
I get what you are trying to do with putting lug nut backwards. But the reason the nuts are smaller or cone shape is to self center the wheel on the bolt pattern. you are not going fast enough to cause harm. Love channel!!!! great info just thought you want to expand your Knowledge.Keep Up the Great Cool info.
That is A Bad- Ass RIGG!!!!!
@chud327
3 жыл бұрын
Thanks and thanks for watching.
You should get a old Ford lawn mower and put John Deere rims on it there wider and can’t get a bigger tire on it
Good lookin mower I’m gonna build mine simular to thst ( just an idea but what if you lowered the front lift kit a tiny bit and but the big tires off the rear on the front
Can you find a way to upgrade that rear diff to a chain drive or something similar? It seemed to struggle move that heavy wheel under stress. Great video as always thats my favorite mud mower for sure
Signal 12!😂
@chud327
3 жыл бұрын
Are you calling me a reckless driver? Funny and thanks for watching.
I wonder if he will say hi . Btw love the video been here for a bit
@chud327
3 жыл бұрын
HI and thanks for being a round for a bit. Thanks for watching.
@mud_man_craftsmen3458
3 жыл бұрын
@@chud327 np
I gotta get me some of those wheel hubs!
@chud327
5 ай бұрын
They work good, I could probably use some more myself… thanks for watching!!
@chud327
5 ай бұрын
There may even be a discount code in the description or maybe tell them chud327 sent you…
@ussdiscovery6912
5 ай бұрын
@@chud327 The website you put the link up for is gone. Or moved I can’t remember what it said. But I found some on Amazon for like 55 bucks.
I have to bring her up to Michigan and play with the big boys 😁
@chud327
3 жыл бұрын
That would be so cool, but it is super long ways for me. Thanks for watching.
Lock the rear and turn the old rear tires into the new front tires to match those 26’s
i'm curious to know how long the spicer you put in that is going to last with those large tires, most experienced mud mower builders don't recommend running anything bigger than a 22 on a spicer or mst transaxle
@chud327
3 жыл бұрын
I am wondering too, it is already worn out... I figure I will just use it until it breaks and then replace it. thanks for watching.
The link for the hub is dead but I think the Powersports part # is KD8LAH-3/4 .$27.95 ea.It is 4 lug on 4" bolt circle. Be careful to get the version with 3/4" all the way thru for the bore (on most riding mowers).
@chud327
Жыл бұрын
Thanks for the tips and thanks for watching!!
Hey bro you should steal a shock off a car not the spring just the shock and use it to stabilize your steering so rocks and bumps don't jerk your wheel around 👍🤙
@chud327
3 жыл бұрын
I am planning a steering redo soon, I like the stabilizer idea. Thanks for watching.
What size pulleys do you have on front and back? I Love the new BIG wheels..
@spudstudios3342
2 жыл бұрын
Stock front pulleys, and 3.5 rear
How do you keep the hub from moving backwards do you have to weld it
@chud327
3 жыл бұрын
I put on the e-clips and put spacers behind the hubs. There are also to allen bolts you can tighten to the axle. You could weld if you like. Thanks for watching.
Cool
What are those adapter for the wheels. Don't know what to look for on the go power web site
@dchadh47
3 жыл бұрын
I couldn’t find them either waiting for a reply
You should make it so both tires spin at all times
@chud327
Жыл бұрын
That would help a bunch, thanks for watching
I got 23x10x12 on my rear and 20x10x8 on my front ag tires
@chud327
3 жыл бұрын
That sounds nice! Thanks for watching.
Do the hubs work on Honda bolt pattern and will the fenders not fit with the wheels ?
@chud327
2 жыл бұрын
I don't think the fenders would work. thanks for watching.
Well don’t those new rears get a good spinning and trench diggin
Hey would a Craftsman LTX1000 good for mudding mower project?
@chud327
3 жыл бұрын
I would give it a shot. Thanks for watching.
26 inch Dooley
@chud327
3 жыл бұрын
That would be sick, thanks for watching.
Where did you get the wheels and tires from could you send a link cause I want to build a mud mower too
@chud327
2 жыл бұрын
I get 95% of my tires off of the Marketplace. These were marketplace and picked up some more last night off marketplace. Good luck and thanks for watching.
Btw I forgot what pulley sizes are you running on the poulan and do you remember what top speed was before tires? Curious how much the tires themselves gave you? Right under 30mph that’s impressive!
@chud327
3 жыл бұрын
I have a 3.5 inch rear pulley. The speed was 17 with 20 inch tires, 23 with 22 inch tires, and 28 with 26 inch tall tires. I am impressed too and thanks for watching.
what size pulleys are on the poulan?
@chud327
3 жыл бұрын
Stock in front and 3.5 inch in rear. Thanks for watching.
Is there an updated link for the hubs?
Chud snorkel a mower and see how deep you can go in the water on one
@chud327
Жыл бұрын
That would be cool and thanks for watching!!
Can thoses hubs fit 4x110 bolt pattern?
@chud327
2 жыл бұрын
I am not 100% sure, I know that is around 4 inches, but not exactly. GoPowerSports.com might be able to tell you. Good luck and thanks for watching.
How do you do a drit steering on a John Deere riding lawnmower 145 automatic I just don’t like my steering set up factory want to make it off road but steering is a little loose so how would you go about doing that could you please make a video on something thanks
@chud327
Жыл бұрын
There may be some old bushings that could be replaced. Good luck and thanks for watching
Whats the size of the new rear tires put on? TIA
@chud327
Жыл бұрын
26x11x14 maxxus zillaa, thanks for watching!!
Hey Chud will the same size wheel adapters fit my Troy bilt pony like yours?
@chud327
3 жыл бұрын
I don't think so, my Troy Bilts don't use keys and keyways. They have flat spot on both sides of the axle and oval wheel holes... Unless yours is different and thanks for watching.
@Fast85CamaroLSX
3 жыл бұрын
@@chud327 so I have Poulan as well do you think the rear will work in the Troybilt pony
@Fast85CamaroLSX
3 жыл бұрын
Basically what I'm trying to do is I have a set of 26 inch ATV wheels and tires tires that are 4 lug that I want to put on the Troy-bilt..any suggestion?
the pullon and chains need to have a pull off
@chud327
3 жыл бұрын
I just did a pull off yesterday with a bigger mud mower, it was a tie... Video coming soon and thanks for watching.
@RockeyDAproductions
3 жыл бұрын
@Mick Mack i have had no issues with it, and i have blown up about 5 trans.
what kind of rear end is on it
@chud327
Жыл бұрын
Stock manual that was swapped in. Thanks for watching
How wide is this rim? 7" is required for 26x10 tire as I understand.
@chud327
6 ай бұрын
These were probably 5-6 inches wide. They are doing great, but were a super pain to put on. Thanks for watching!!
Hey could you do a top speed video
@chud327
3 жыл бұрын
That was at the end of this one, but I am sure I will be doing it again, probably tomorrow. thanks for watching.
How do you get it to go so fast?!
@chud327
3 жыл бұрын
Small rear pulley and tall rear tires. Thanks for watching.
What are the rims off of for the hubs
@chud327
3 жыл бұрын
These were off of a Nissan Sentra 1998. Thanks for watching.
@mitchelllawrentz766
3 жыл бұрын
Thank you
Do smaller Pullies make it faster or do bigger pullies make it faster?
@chud327
3 жыл бұрын
Both depending on where you put them. Smaller in the back makes faster and bigger in the front also makes faster. Thanks for watching.
Building a new one, 160, wh auto matic
Where can I buy the hubs?
@chud327
2 жыл бұрын
These came from gopowersports.com, say chud327, they might give a discount… thanks for watching
Is 4x4 the same as honda atv wheels 🤔
@chud327
Жыл бұрын
Good to know and thanks for watching!
What happened to the nissan
@chud327
3 жыл бұрын
Clutch started slipping so I sold it... thanks for watching
Lock the diff
@chud327
Жыл бұрын
Good idea, planning to lock major Dan Murray's rear end first. Thanks for watching
The rims are 14's right??
@chud327
3 жыл бұрын
Yes they are, and thanks for watching
@COWGIRLMOTORSPORTS
3 жыл бұрын
@Mick Mack Nissan (53) 200SX AD Almera Be-1 Bluebird Sylphy Clipper Clipper Rio Cube Cube Cubic Dayz Dayz Roox Figaro Kicks Kubistar Latio Lucino Magnite March March Active March Box Micra Micra Active Micra C+C Moco NP200 NT100 Clipper NV100 Clipper NV100 Clipper Rio NV150 AD NX Note Otti Pao Pino Pixo Presea Pulsar Rasheen Roox Sentra Sunny Sunny Box Sunny California Sunny RZ-1 Sunny Traveller Sylphy Classic Tiida Tiida Latio Tsuru V16 Versa Versa Note Wingroad
Where did poulan go?
@chud327
2 жыл бұрын
I still have it, will try to fire up soon. Thanks for watching.
Hey chud the your my hero guy love the vid I'm building a mower with a vtwin but I need some tires plz comment back
@chud327
3 жыл бұрын
Hope you build is going well and I love the hero part. thanks for watching.
I have 27 in talls on mine
@chud327
3 жыл бұрын
very nice, how fast and thanks for watching.
@radfab7775
3 жыл бұрын
@@chud327 its not pulley swapped so only like 8 mph, love your video's
@shawndavis4035
3 жыл бұрын
I gotta buddy on 40s 🤣
@radfab7775
3 жыл бұрын
@Mick Mack Yes they are true 27s
What kind of rims and tires?
@chud327
Жыл бұрын
I don't remember the name on the tires, but they are 26 or 27 inches tall. The wheels are from a Nissan Sentra. They are 4 lugs. Thanks for watching!!
@chefjamesjk
Жыл бұрын
@@chud327 thanks man appreciate it I've got a mower build going and I was trying to figure out how to get bigger wheels on the back love this idea and the disc brakes video too really helpful
@chud327
Жыл бұрын
@@chefjamesjk very cool, thanks!
Needs high Rev kz 900 engine
@chud327
Күн бұрын
Would be cool!! Thanks for watching!!
Can I have your husky lawn mower because my brother needs one
@chud327
Жыл бұрын
Sorry, I gave it to the son-in-law... thanks for watching.
Where are you from I have a lawn mower I'm making a pulling lawn mower
@chud327
Жыл бұрын
I am in NE Florida. Thanks for watching
link to those rims? and it looks great!!
@chud327
3 жыл бұрын
The wheels are off of a 90's NIssan Sentra, the hubs link is in the description. thanks for watching.
Get spacers
Tomorrow is my birthday the 19th I am going to be 14 years old
@junkhondas481
3 жыл бұрын
Happy early birthday
@nathanh3975
3 жыл бұрын
Happy early birthday 🎉
@chud327
3 жыл бұрын
Sweet, happy birthday and thanks for watching.
@datwalmartkid4518
3 жыл бұрын
Happy early birthday
@jam8380
3 жыл бұрын
@@chud327 thanks
I found this amazing Murray with a snow plow and a pulley swamp and I what it SO BAD and I have the money for it but my mom won’t let me 🙁🙁🙁🙁🙁🙁🙁🙁🙁 AND I NEED IT I are ready have a name for it ☹️☹️
@chud327
3 жыл бұрын
Sorry to hear that, maybe she will change her mind...
@levigallagher8197
3 жыл бұрын
@@chud327 ya hopefully
👍👍♥️♥️
@chud327
6 ай бұрын
Thanks so much and thanks for watching!!
2:04
@chud327
Жыл бұрын
Thanks for watching
Them tires eat...can you please check out my newest video and tell me what you think thanks
Small pulley big tires = 👎🏽
@chud327
3 жыл бұрын
I have to disagree, I love it and thanks for watching.