Building Wheel Hubs for Sick Paddle Tires
Автокөліктер мен көлік құралдары
In this episode, I homemade some wheel hubs so I could test a pair of sick sand paddle tires.
Please consider supporting my work with Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching.
Пікірлер: 77
He always sounds so laid back, regardless, of the situation. LoL 👍🏻👍🏻
@darrenfinnerty3872
2 жыл бұрын
Just got my arm stuck in bear trap but thats ok
You inspired me to get a mower and turn it into mud mower
@sirspenslawncare7665
2 жыл бұрын
It's a 2003 murray
@sirspenslawncare7665
2 жыл бұрын
I made channel for the mower too! it"s call Murray Mudder
Love the use of the word sick... bro
At the beginning of summer I was in Florida! And it was great
@chud327
2 жыл бұрын
Yes, I love it even though so days are too hot and some are too rainy. Overall, I dig it. thanks for watching.
Chud327 you should make a turbo mud mower
That looks so cool!!!
Man that's badass I love it
You should do a video of your fans mowers say what you like and what could be done better
@acrobatic_beef
2 жыл бұрын
I agree. Can't wait to finish mine
Dude that's awesome. I want a mower haha. Kinda needing one my yards getting out of control with all this rain.
@chud327
2 жыл бұрын
I know what you mean, mine too. Thanks for watching.
How well will that thin of plate hold up, should I do something thicker?
@chud327
2 жыл бұрын
So far, mine is great. However, thicker would not hurt anything... thanks for watching.
Would like to see it on the softer sand further away from the water. That wet sand near the water is a little more "solid."
@chud327
Ай бұрын
Me too, that wet sand rode way too rough. I ride it in soft sand at the river, be sure to check that out... It was doing wheelies even in the soft stuff. Thanks for watching!!
How's she goin'? Those tires look pretty mean!!! Nice job making those hubs. They worked out pretty good. A rough ride, but that just makes it more fun!!! Take care!!!
@chud327
Жыл бұрын
Was a very rough ride. But loved them in the sand thanks for watching
To deal with the key issue I put the little bump out on the middle of the c clip on the key way stops it from falling out
@chud327
Жыл бұрын
Good tip , they should make them like that, thanks for watching
Life a ditch, can ya dig it? Yep- with a mud mower👍👍👍🛠️🚜🔨🔧❤️
@chud327
Жыл бұрын
Funny and thanks for watching
Sorry i meant to say cooooolll
@chud327
2 жыл бұрын
All good, and thanks for watching.
@sirspenslawncare7665
2 жыл бұрын
@@chud327 Thank you
Just waiting for a waterboy moment H20 is better! Thanks and more please
@chud327
Жыл бұрын
Funny and thanks for watching
SIC paddles mate!
@chud327
Жыл бұрын
Thanks so much and thanks for watching
Starting my build tonight after work but I gotta get it running first
@chud327
2 жыл бұрын
Love it and let me know how it goes. thanks for watching.
@Murraymudder
2 жыл бұрын
Same
Did you see the movie about the man in his 80s who lost his license so he used his lawn tractor to go on a road trip to visit his brother for the last time. It starred the wonderful late actor Richard Farnsworth.
@chud327
Жыл бұрын
I think I have heard of it . Thanks for watching
do you accept letters?
What size and brand tire do you have on the front of the silver bullet to go along with the dirt devils?
@chud327
Жыл бұрын
I don't remember the name, but I believe they are 27x9x8's from gopowersports com. Sorry for the delayed response, just seeing the comment. Thanks for watching.
cooo
@chud327
2 жыл бұрын
Funny
@sirspenslawncare7665
2 жыл бұрын
@@chud327 yeah
How about muddin with those paddles on?
@chud327
Жыл бұрын
Never got around to it, but I still have them. Maybe someday and thanks for watching
I was going to buy some tall grip lawn mower tires but they’re 134$ a tire😐😐😐
I dont know if its the camera angle but the right axle looks bent
@chud327
Жыл бұрын
I will stare at it next time I mess with it and thanks for watching
Those wheels are a 4 on 110mm bolt pattern which is 4 3/8" approximately... Honda atvs,some yamahahahas,some Canned Hams use that pattern... That's a good price for that setup which is about 350-400 bux new these days..
@chud327
2 жыл бұрын
Thanks, that sounds right. Dang, I might need to put them up for sale. Thanks for watching. Lol canned hams!
Hey chud I noticed u live around the same area as me and I’m trying to pulley swap my mower I didn’t know if u had any advice or would be willing to help
@chud327
2 жыл бұрын
Where are you and what kind of mower? Let me know and thanks for watching.
Have a question when you swap a pulley on a troy bilt pony how do you get the brakes on it
@chud327
2 жыл бұрын
If you pulley swap the front, the brakes should still be on, right? Thanks for watching.
Traveling lite aren't ya?, where's Wyatt and Doc at nowadays, lol, (I don't have a name for ur oldest, so I'm just calling him Doc), great video, thanks for sharing.
@chud327
2 жыл бұрын
Yes they both have jobs. Wyatt's does not start until 2PM, but I did not know if I would be home in time for him to get there. Thanks so much for watching. BTW, the oldest is Ethan.
I didnt notice much difference in either muffler.. those paddles might do better in mud.. that was a cool bridge.. where is it?
@chud327
Жыл бұрын
That is the George Crady bridge south end of Amelia Island crossing the Nassau Sound. Thanks for watching and sorry for the delayed response.
What's your belt set up like on the silver bullet? you seem to get pretty good belt grip, can you show it in your next vid
@chud327
2 жыл бұрын
I actually have a video of changing pulleys and putting the belt on. It is a 6 inch in front and a 5 inch in the back, but I don't remember the belt size... It is a great combo and thanks for watching.
@droptheblades895
2 жыл бұрын
@@chud327 thanks, I've probably watched it but don't remember sizes, I also meant the clutch setup but ill look for the vid instead :)
Need some help with wireing a 18.5 briggs and stratton wireing to the key switch
@chud327
2 жыл бұрын
I did a wiring video on my poulan about a year ago, it may help you, but I don't know. thanks for watching.
@robertnewland4695
2 жыл бұрын
@@chud327 do you have a link to it
I have never been tempted to write this here before , so here goes. THAT stock exhaust is ultra rowdy after hearing the big bore you had on before. And a caution that I have no ulterior interest in how much noise such a machine should make. A Supertrapp is what you need tho! then you can be safe and tune to best performance.
@chud327
Жыл бұрын
Supertrapp would be very cool and thanks for watching
ARE THOUGHTS WHEEL STRONG ENOUGH TO CARRY DEAN SMITH
@chud327
2 жыл бұрын
I don't know Dean Smith, but I hope so. thanks for watching.
You should have just took your fishing pole and drive it on the bridge
@chud327
Жыл бұрын
That would have been an interesting video... Thanks for watching
16.99-10.99=6 not 12 :)
@chud327
2 жыл бұрын
You are right on your math, but I had to buy 2. 6X2 is where the 12 came from. thanks for watching.
He think hes really doing something putting tires and changing the oil on a LAWN MOWER 😂😂😂😂😂😂
@chud327
2 жыл бұрын
Doing good stuff, that you do not have to watch or comment on, but thanks so much for watching.
@jerryb1234
2 жыл бұрын
What's funny, is that you think you're pathetic comment is actually funny.