Just like whistlindiesel but with garden tractors

@chud327

4 жыл бұрын

Yes and with matching tires... Thanks for watching.

@jacksongreiner2919

4 жыл бұрын

Lmao I was just about to comment this😂

@datwalmartkid4518

4 жыл бұрын

time to make the monster troy

@farmingtoday2943

Жыл бұрын

Finally someone knows whistlindiesel

Inspired me to go out and buy a craftsman lt2000 and make it a mud mower. Great videos from y’all! Thanks for the awesome content

@chud327

2 жыл бұрын

So cool and thanks for watching

Because who needs duals when you can have triples. Triple the tires triple the fun.

@chud327

3 жыл бұрын

Well said and thanks for watching.

It looks like the wheels was easy to drill holes trough. I would add wheel weights to my lawn tractor and it dont have holes in the wheels for it but thanks to your video it seems like it wont be a problem. 👍😊

@chud327

2 күн бұрын

Should be able to pop all the holes to need. Thanks for watching!!

@BSS22193

Күн бұрын

@@chud327 That sounds great! 👍 I only have a cordless drill but i think it would be fine anyway. I've watched a lot of your videos and i really like everything you do with you lawn tractors and i really love how you make everything to fit no matter what mods you do to them. You're a skilled mechanic and its great to watch your videos!!!

@chud327

Күн бұрын

@@BSS22193 thanks so much!! I love hearing that!! Wait till you see my latest build. Hint: huge John Deere…

@BSS22193

Күн бұрын

@@chud327 That sounds awesome! I'm looking forward to see it! 👍😀

Great video HAPPY THANKSGIVING to you and your family. Can't wait till next video. 🦃🍗🍗🥧

@chud327

4 жыл бұрын

Thanks so much and thanks for watching. I will try to do one real soon for you! Thanks so much and thanks for watching.

Those turf savers....I ran on my racing 3 wheeler for flat track tires....bite like crap...in a great way!!!! GREAT TIRE!!!!

@chud327

4 жыл бұрын

Thanks for watching.

I have just been hitting the like on every video I watch on your channel, even if I don’t watch the whole thing. Idk you are my favorite KZreadr though

@chud327

2 жыл бұрын

I love the like button part and especially the favorite part, that is so cool and thanks for watching.

Looks like a good way to snap a transaxle in half. I hope some reinforcement was added.

@chud327

4 жыл бұрын

We will see, if it breaks, I would love to put a rear rear end under there. thanks for watching.

I am glad you did this. I might have gone my whole life without seeing that. Whew! Thanks for the video.

Alright time to put some floaters on the front and make it land and water mower 😂 great vid! Keep up the good work good sir! and merry Christmas to you and your family! And a happy new year!

@chud327

4 жыл бұрын

I was actually thinking bout that when they were on my Poulan. I could have strapped a 55 gallon drum on the big ol front bumper and went for a cruise. Maybe next summer I can actually do that. thanks for watching.

I have a Murry similar to yours and I have a John Deere LA140. I think you need a lift kit on the rear of about 2-4". Stack a bunch of washers between the axle and the frame maybe.. Also, when you figure out the surge issue with the engine, let us know. My John Deere does that too sometimes... Keep up the good work.

The Troy Bilt is awesome . Maybe wheel weights from old garden tractor or fluid like we did our farm tractors for more traction & no floating . P.S. when are we ever gonna see pontoon #2 ?? the preview was great but I really wanted to watch #2 before starting mine , thanks ,Dan

The problem with the revving will be the thin spring that goes beside the linkage connecting the carb butterfly and the governor arm

Stop it! I can't keep up with the awesomeness of your videos. Have a wonderful Thanksgiving. I'm gonna be working on my tractors after Turkey digests.

@chud327

4 жыл бұрын

One of the best comments of the week!!! Thanks so much and thanks for watching.

Speechless!

@chud327

Жыл бұрын

Thanks for watching

awesome work!

@chud327

4 жыл бұрын

Thanks so much and thanks for watching.

That Troy built is crazy lol. Haven’t seen triples on a mower yet!

@chud327

4 жыл бұрын

Yes, it has been in my head for a while, glad I could make it happen. thanks so much for watching.

Great video

Can’t wait for it

@chud327

4 жыл бұрын

Thanks

Cool. Now I have to do this. Sounds like Triple Troy needs to go see the Surging General, btw!

@chud327

Жыл бұрын

it was very cool, except in water it just wanted to float and took up a lot of space on the trailer... I have since fixed the surging and thanks for watching.

Should change it to doubles in front and back........Looks like fun Thumbs Up

@chud327

4 жыл бұрын

That would be cool and thanks for watching.

Fist bumps 👊👊👊👊👊, high fives/pats on the back ✋✋✋✋✋, extra thumbs up 👍👍👍👍👍 Pets ❤❤❤❤❤, treats and tummy rubs.

@jacobdoesstupidstuff9358

4 жыл бұрын

Wow that’s kinda gay

@mishawakapost2681

4 жыл бұрын

@@jacobdoesstupidstuff9358 You're entitled to your opinion.

I like the property line shack. Man I wish I saved my yurfs that came of my Troybilt. I had no clue that was possible to do. Perfect front rims since theres no key way. Yes I hope you make it to your goal. Gotta see the zero turn lol. Happy Thanksgiving.

@chud327

4 жыл бұрын

Awesome comment and happy Thanksgiving to you too. Thanks so much and thanks for watching.

@HillbillyOffroading

4 жыл бұрын

Thanks and you're welcome

Did you have your driveway redone

You should get a set of black mamba tires for one of your mowers

@chud327

4 жыл бұрын

If I can find a deal on a set, I would like to try some. thanks for watching.

Looks good. And Happy Thanksgiving.

@chud327

4 жыл бұрын

Thanks so much and you too, Thanks for watching.

4 жыл бұрын

@@chud327 You're welcome. 😊

What about the craftsman with that 5 hp honda pull start engine

This is going to be good

@chud327

4 жыл бұрын

Thanks

what is that flash light, its so bright lol

yeah your zero turn needs duals. just this past week i fabbed up some band duals on 15" rims for the front wheels on a 730case tractor. round baling meadow hay on 4" ice the front right broke through up to the axle took me all day to get the tractor out. i have a 6ft wide heavy sheet metal brake used 10 gauge x 10" wide for bands & shitload of 1/2" all thread

@chud327

4 жыл бұрын

Do you have any videos of that, it sound legit! Thanks for watching.

@jasonmushersee

4 жыл бұрын

@@chud327 no. i was so pissed off that day in fact my neighbor thought i was hurt they called my brother he came i punched him right in the face

Man where du you get your tires so killer

Great video! Ive got a few of those rims id like to drill out, now i know what size drill to buy, thanks!

@chud327

4 жыл бұрын

You got it now get to drilling. thanks so much for watching.

Nice 👍🏽

@chud327

4 жыл бұрын

Thanks so much and thanks for watching.

Can put windshield washer fluid in your rear tires so they don't float

@chud327

4 жыл бұрын

That is true, but it would be a bunch of fluid... thanks for watching.

25$ kit with fuel lines carburetor and filter will fix the surging @t This worked for mine yours may be different

@chud327

3 жыл бұрын

cool and thanks for watching.

He should put four tires on each side of troy 6

@danmcdonough8514

4 жыл бұрын

HOW DOES THE AXLE & TRANS TAKE ALL THAT FORCE, Deere 455 Diesel With Dual BAR Tires, I Break Axles & (2) Cases Split

@chud327

4 жыл бұрын

I need two more super crosses and I would sure do it! Thanks so much and thanks for watching.

@chud327

4 жыл бұрын

This one will probably break too with a little more time. thanks for watching.

@RockeyDAproductions

4 жыл бұрын

@@danmcdonough8514 because his belt slip saves is rear, it stops him from putting to much torqe to the wheels.

@joshmatthiesen4552

4 жыл бұрын

Carson Snyder he should make it run correctly first lol. And this idea looks goofy. Maybe use four threaded rods. Lots of play in the tires.

I wonder if you can add more wheels front and back and have an amphibious mower

@Blacksmith52

7 ай бұрын

like a 6x6?

I think it looks cool, but I also think that three tires are too much for that kind of setup, if you had a better way to put them on ,right now the all thread is too week, and if it was chain driven instead of belt drive

@chud327

2 жыл бұрын

Never had an issue with the all-thread, but tires did try to twist a bit. Biggest issues was the rear end wanted to float causing no traction in water. Was a fun experiment, thanks for watching

I new you would put triples on the Troy in one of your other videos triple Troy is the new name

@chud327

4 жыл бұрын

It is a good sounding name too... Thanks so much and thanks for watching.

Flashlight is cool. How about fixing the surge in that engine? That drives me nuts. Or as my boss would say, “Drive, it’s just a short putt. “

I’d be worried that 3/8 diameter all thread would break. Have you experienced any issues since the install? That’s a really cool idea brother! I like it.

@chud327

4 жыл бұрын

Never a probably with it breaking, it did bend a little. thanks for watching.

Next up 4x4 with all quads

Super cool! Maybe fish triple Troy out with dually zero turn? I have been hunting for some of those super cross tires can't find em. Does any body know where to get em?

@chud327

4 жыл бұрын

That is exactly what we did the next day. It had a dead battery, I don't know why... Charging battery right now. I looked online, I don't see Super Crosses either...

I have a Scott’s John Deere mower in has 4 actual not drilled holes on it and I had 26 inch tall dual treaded tires on it

@chud327

4 жыл бұрын

That sounds like a beast and thanks for watching.

Looks Cool How long will the transaxle hold out.

@chud327

4 жыл бұрын

Thanks and we will have to wait and see... thanks for watching.

Hey Chud can make a four wheel drive mud mower

Sould put weight on the end so the 2 end tries touch the ground and more traction and if you connect the tries 2 at a time they don't flop around as much how I didn't mine with weights

@chud327

4 жыл бұрын

Weights would help out and thanks for watching.

@dakotak8437

4 жыл бұрын

@@chud327 very welcome love to watch great videos

How did you put the bigger tires on front, if you can do a video ,I would greatly appreciate it

@chud327

Жыл бұрын

I have several videos already. Take the back tires and wheels off of a troy bilt or other fnr and drill out with 3/4 inch drill bit. Put more aggressive tires if you have them and done. Good luck and thanks for watching.

@nickdavis9512

Жыл бұрын

Thank you so much, I thought I looked threw your playlist, but maybe I wasn't looking good enough, if you don't mind can you post me a link, Thanks buddy

When are the duals going back on The Poulan and Are you going to put duals on both mowers

@chud327

4 жыл бұрын

I should put them on soon. which both mowers? thanks for watching.

@zacharygromak1910

4 жыл бұрын

Poulan and The John Deere

Fill the tyers with water

Where did you get those tires from?

@chud327

4 жыл бұрын

I found these on Facebook Marketplace, thanks for watching.

@braedenfuller6786

4 жыл бұрын

Chud327 thanks

Looks like they have a bit of a flex to them. Maybe a thicker threaded rod next time?

@chud327

4 жыл бұрын

Maybe thicker and I think I need to tighten the nuts again. thanks for watching.

@bighoss7603

4 жыл бұрын

@@chud327 you know now that you have to put triple tires on the front! Always great content chud!👍🏼

That is really neat but the front tires need to have bearings in them

@chud327

4 жыл бұрын

Bearings would be nice, but most mowers these days only have bushings. It should be fine as long as I grease them often. thanks so much for watching.

How many tires are you going to go up to? :)

@chud327

4 жыл бұрын

I don't have more that 6 that match, this may be my limit... thanks for watching.

@wiblesgarage2016

4 жыл бұрын

chud327 ahh, gotcha.

Welcome to chud,s mud monster mower.s happy turkey to you & your family 😀😀😄👍 if you want to.put led,s on your mud monster,s that would look 👁️👁️cool

@chud327

4 жыл бұрын

That would be cool! Thanks so much and thanks for watching.

@robertmailhos8159

4 жыл бұрын

@@chud327 you are welcome my floridia .brother

Good golly..not in my wildest dreams...

@chud327

4 жыл бұрын

Thanks so much and thanks for watching.

What could possibly go wrong LOL

@chud327

4 жыл бұрын

We will see and thanks for watching.

I don't think this one was that good of an idea belt was slipping and the wheels bending up from being so wide

@chud327

2 жыл бұрын

Yep, that was just a fun experiment just to say I tried it. Also, the rear floats in water making you stuck... thanks for watching.

That’s sad you have all these bad ass mowers then you have to use a car to pull it out , you need a cool truck

Why do all of your mower engines surge? You do know that is not normal!?

@chud327

4 жыл бұрын

The only one that surges right now is Troy #6. Did I miss one, can you think of another? thanks for watching.

kzread.info/dash/bejne/maGCtpuOotzVlKw.html i see a dinky steering wheel in that scrap pile.

@chud327

4 жыл бұрын

I think you are right and thanks for watching.

It sounds like your mower is running rough

@chud327

Жыл бұрын

That is common and thanks for watching!!

I'm pretty sure Troy 6 shouldn't be pulsing. You should fix It. It's gets really annoying

@chud327

3 жыл бұрын

I call it surging and yes it is annoying, I plan to fix it before the next ride. thanks for watching.

@jaydenlongstreet9451

3 жыл бұрын

@@chud327 that's good 😊 love the videos

funny

@chud327

4 жыл бұрын

Thanks and thanks for watching.

Make a 4x4 mud mower

@chud327

4 жыл бұрын

That is on my list and thanks for watching.

@jaydondeas1540

4 жыл бұрын

@@chud327 Np man I love watching projects like you do and you inspired me to one day build my own mud mower and do the same thing that you do bud :) Keep up the good work 👌👍🔥💪👏🇺🇸

🤦‍♂️

@chud327

4 жыл бұрын

Thanks so much and thanks for watching.

That won’t last

@chud327

4 жыл бұрын

You were right, I put them on a different mower. thanks for watching.