Putting Disc Brake Kit on My Mud Mower
Автокөліктер мен көлік құралдары
In this episode, the Poulan get rear disc brakes from GoPowerSports.com
www.gopowersports.com/?...
Item # Description Qty
KDSPHUB Sprocket and Drum Mounting Hub 1
KDBRKC Brake Cable Heavy Duty 1
BRAPBRAPSHIRT - L GoPowerSports Brap Brap Shirt 1
3/4-LAH 3/4" All Way Thru Live Axle Hub 2
TH1000 Manual Brake Caliper Bracket 1
9597-9598 Manual Brake Caliper 1
MB8D Mini Bike Brake Disc 1
Please consider supporting my work with Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching.
Пікірлер: 86
Like they all say, Chad. “It’s gonna get worse before it gets better”. Those breaks just need to be like on both sides and maybe that’ll help. I might buy you one for the channel
Why don’t you put a v twin on there
I'm planning on installing hydraulic disc brakes on my mower and this really helped, seeing how you mounted your brake has given me so great ideas. Interesting idea with the deck high adjuster and your brake handle, on my mower I was planning on using the blade engagement as my handbrake and the hydraulic brake lever somewhere else.
I think that was smart the way you use the deck riser as a break
@chud327
3 жыл бұрын
That is what I was thinking too. On my John Deere, it became the shifter. I wonder what it will become next time... Thanks for watching.
@zakaikamdyn2172
2 жыл бұрын
You probably dont care at all but does anybody know a method to log back into an Instagram account? I was stupid lost my account password. I appreciate any tips you can give me.
@travisjude3230
2 жыл бұрын
@Zakai Kamdyn instablaster :)
@zakaikamdyn2172
2 жыл бұрын
@Travis Jude i really appreciate your reply. I found the site thru google and Im trying it out atm. I see it takes quite some time so I will get back to you later with my results.
@zakaikamdyn2172
2 жыл бұрын
@Travis Jude it worked and I now got access to my account again. I'm so happy:D Thanks so much, you saved my account !
Great idea with those brakes. Once I start work on my kubota t1760 I'll keep you posted on how it goes.
That break works really good I got to see it I’m action I feel spoiled over here great job chud that’s some great fab work bud
I think it needs one for the other side to get the stopping power you want, great video, thanks for sharing.
Very clever use of the deck height adjuster I'll have to keep that in mind
@chud327
3 жыл бұрын
yes, it wasn't being used for anything else... thanks for watching.
Great video man thanks for sharing I love all your videos. Hopefully if I can find a free mower I'm going to make my first mud mower. You have given me some great ideas thanks again for sharing God Bless yall stay safe 👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Me and my dad made some Hobbes for my lawn mower and it's like tractor type style tires but they're tall and skinny and while on lawn mower goes about 15 miles an hour he used to go 12 and I have a 3 inch pulley on the back
I just stumbled onto this video. I was thinking of doing the same thing on my build eventually. Now I know, discs on both sides lol.
@chud327
Жыл бұрын
Yes, I recommend discs for both sides. Thanks for watching
*Thought you where going to cut the box open with the table saw LOL!!!*
@jennyeisenga7866
3 жыл бұрын
Same
@rickems8863
3 жыл бұрын
I third the notion
Could try a bigger piston or similar for more brakepad area on the disc.
You can turn that black lever on the brake around.
Why did you not weld the brake hub right to the wheel hub? Not worried that the weld will weaken the harden shaft?
@chud327
3 жыл бұрын
I didn't think of that and I only did tack welds, hopefully it will be ok and thanks for watching.
You making me nervous with that saw blade poking up on that table... 😳
@coganwatts7054
3 жыл бұрын
Same😂
Good engineering to get that to adapt. Would be interested in seeing if clearance would allow that disc to be mounted to the pinion pulley to serve as a pinion brake to both rear wheels.
@chud327
3 жыл бұрын
That would be cool, would probably have to extend the shaft. Would be a good idea for a lift in the rear mower... thanks for watching.
Im trying that disc brake eventually👍. You need to bring the Colonel Craftsman on the next ride👍
@chud327
3 жыл бұрын
That would be cool! I will plan on it. If I get my truck going, I will try to bring 4 mowers.
@PartsPieces
3 жыл бұрын
Heck yeah👍. That would be cool too, it would be a mud mower extravaganza! Wait until you see my new project. Im bringing it to the river on the next trip. Heck, thats one of the reason's why im building it, lol👍
Good job.
I don't suppose you could send me a 5 or 6 speed axle. I need one to swap out the FNR axle on my Troy Bilt.
@chud327
2 жыл бұрын
Sorry, I have none to spare, but thanks so much for watching!
nice video
Need to move that brake bracket further out so that caliper dont slide off the bracket.
I quit using the little clips just drill a hole in the slot and cotter pin it. I put hydraulic foot brake from Chinese quad mounter rotor on the original little disc just flipped it around for clearance thought it might snap the shaft but sofar so good been running 26s off of Polaris ranger.
@chud327
Жыл бұрын
Good tips and thanks for watching
why didn't you just weld the disk brake hub to the wheel hub . it would have been 100 percent serviceable. Disks on both sides would be great. prevent it from diving to the left on hard braking , unless you weld up the diff.
That's awesome!! What size of welding wire?
@chud327
3 жыл бұрын
I think .035, but that is from memory and I am new to the art of wire welding. thanks for watching.
I think you need dual disc and make it on a foot pedal..
AWESOME VW. 😅😅😅
@chud327
15 күн бұрын
Thanks so much and thanks for watching and for multiple comments!!
What is the adapter that you used from the shaft to put on atv tires
@chud327
Жыл бұрын
I have used to different types for mower. These came from gopowersports.com and I also did some homemade ones. Gopowersports.com may give you a discount if you use "chud327" when you buy them. Thanks for watching.
I think I may do this with independent controls instead of locking the diff.
@chud327
Жыл бұрын
Good plan and thanks for watching
Hey chud what kit did u get because i cant find it on go power sports
@chud327
Жыл бұрын
If you call them they should be able to help. It is for a 3/4 inch axle with a keyway. Be sure to tell them chud327 sent you, they may give a discount. Thanks for watching!!
Nice would love to see you install a atv winch.
@chud327
3 жыл бұрын
I installed one on my John Deere about a year ago. Do you mean on the Poulan? Thanks for watching.
@Nfitz04
3 жыл бұрын
One on the poulan would be cool
@that_crankytf9571
3 жыл бұрын
@@chud327 Yeah the poulan.
Not to keep bothering you but I have 3/4 axle I don’t know what one to get, and where and how much were your tires size too
@chud327
Жыл бұрын
Gopowersport.com should be able to help with the hubs. I think the tires are 26 or 27 inch tall, found them on marketplace.
What’s the exact hub you got off of go power sports, what front wheels you get
@chud327
Жыл бұрын
I don't know the part number, but they are for 3/4 inch shafts with key ways. Sales man could probably help you with a part number. Say the one "chud327" used. For front wheels I like troy bilt rear wheels drilled out with a 3/4 inch bit. Thanks for watching!!
Wow Ok thinkin ya Got this But I wood put on Both sides just sayin so things Don't Break that's Just me The Hand Break is cooool Idea Thanks For Sharin is it Still working ? it's 2022 so Just askin ? P.s what did the Kit Cost yA ?
@chud327
2 жыл бұрын
You would have to check the website, they gave it to me to try out. It would be much better with 2 and thanks for watching.
Look at my profile picture the white wheels and the Chrome stack is what I put on it and I still have to do some more work on it
@chud327
3 жыл бұрын
Hard to see the little picture, but looks good
@jam8380
3 жыл бұрын
@@chud327 I wish I could send you the full picture if you know how to do it let me know
@jam8380
3 жыл бұрын
@@chud327 I wish I can do a river ride with you but I live in Pipestone Minnesota and that's like how many hours away
@rickems8863
3 жыл бұрын
@@chud327 chud , I love your take on the mud mower world , my profile pic reflects on my take . Similarly, my power wheels use riding mowers as a base. So much fun. keep making mowers great again and again.
There is no way this is already 2 years old
@chud327
Жыл бұрын
Time sure flies, thanks for watching.
why didn't you weld it to the hub insead of the axle shaft?, good work anyway..
@chud327
3 жыл бұрын
I didn't even think of that... next time and thanks for watching.
@jaypeerobot3745
3 жыл бұрын
@@chud327 You could also mark where your allan set screws are and drill the shaft. Go in about 1/8th to 1/4 inch, and when you tighten them your brake won't slip on the shaft.
You could probably make one of those hubs out of a old mower wheel
@chud327
3 жыл бұрын
You could and thanks for watching.
@chud327
3 жыл бұрын
@@cartermiller9284 I will keep my eye open for a deal on one.
How much did it all cost
@chud327
Жыл бұрын
you would have to check their website at gopowersports.com, they actually sent if to me to make the video. thanks for watching.
I’ll bet is faster with the larger wheels, the only other issue is that you just sacrificed the turning speed & torque of smaller tires.
@chud327
3 жыл бұрын
It is faster, I hit 28 mph! It still has good torque in first gear and thanks for watching.
Hey
@chud327
3 жыл бұрын
HI and thanks for watching.
1
@chud327
3 жыл бұрын
Good job and thanks for watching.
,
@chud327
Жыл бұрын
Thanks for watching