Pulley Restoration | Is That Poop??
Ғылым және технология
The old rusty pulley from an old barn does not have many parts, so disassembly was straightforward. In this project I have had to make several bolts new on the lathe, welding, paint spreading, sandblasting, grinding and then some. Please also note that this video is not just to quickly show someone how something works, but also to relax and unwind from the daily grind!
------------------------------------------------------------
▶ What did I do ?! ◀
To disassemble the antique idler pulley it was enough to pull two bolts and disassemble the plain bearing to hold all the parts in my hand. After washing them off in water, I sandblasted all the parts in the sandblasting cabinet. After removing burrs and imperfections, the major components could be painted with rust preventative paint. The bolt, on the old pulley had to be replaced because the old one had too much play in the fit. The bracket, including the bolt that holds the idler pulley, also had to be rebuilt. After all parts were reassembled, the bolt could be filled with grease. As a small detail, the letters were colored to match the pulley.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Water pump pliers, pin punch, hammer, dishwasher liquid, brush, screwdriver, wire brush, compressor, sandblasting cabinet, abrasive corundum, key file, metal rust preventive paint, paint brush, lathe, lathe chisel, center drill, drill, cordless screwdriver, saw, tap, center punch, caliper, countersink, polishing machine, polishing paste, multifunctional tool, scriber, parallel scriber, stop angle, angle grinder, welding machine, welding helmet, adhesive tape, lubricating grease
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!
Пікірлер: 264
Turtle's digusted face while looking at the old grease was just classic! The pulley came out wonderfully, and now i am thinking of Hogan's Heroes (Hochstetter). 😊 Such a wonderful job on the old pulley. I hope it has many good years left.
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 😁🐢
@Fruity_lexia
Жыл бұрын
My mind went to Major Hochstetter too!
@davesmith5656
Жыл бұрын
I like the way he bring the turtle's unique talents into the process. That's the way to treat a valued employee. I just hope he's paying into the social security plan and medicare and is providing for the turtle's old age.
@TheGelasiaBlythe
Жыл бұрын
@@davesmith5656 yes, Turtle deserves care in her old age. I think she will never have to worry, though.
Not poop, but it may have been a pulley wheel with either a leather or rubber bedding to make the wheel less noisey.
@Dave_en
Жыл бұрын
I think its leather or rubber gasket for smooth noise free operation. It's purpose may be to prevent wearing off the pulley and its replaceable component. The leather rotted and appeared to be poop.😂😂😂
I really admire your professionalism, care and persistence. I especially like your humorous style.
@ForgottenShineRestoration
Жыл бұрын
Thank you very much for your great comment! 🤩 🐢
I love the camera filter you used to show the welding! It was neat being able to see more of the welding process up close.
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
It’s not really a restoration, it’s more a rebuild. Loved the workmanship as usual.
@piperatthegatesofdawn
10 ай бұрын
Who cares? Bet you're a blast at parties
I always loved when turtle popped up here and there, but I wasn't much of a fan of his new face in the newer videos until he saw that old grease. You've won me over. Great restoration as always.
@ForgottenShineRestoration
Жыл бұрын
🤣👍🐢
Nice save of that pulley system. And the colors look good too. One suggest, if you have the space, install a backup washer before installing the cotter pins. That way if, or when, the cotter pins spin, it won't scratch up the finish. Thumbs Up!
@ForgottenShineRestoration
Жыл бұрын
That's right, thanks for the tip! 🐢
I tried alot but didn't found any other restoration youtube channel better than this. You are great
@ForgottenShineRestoration
Жыл бұрын
😳🤩 Thank you so much! 🐢
Love the restoration. Ever thought of giving the Lil Turtle a "Spa" day?. He works hard and deserves a shell buff no? Especially after cleaning that S#!T LMAO Great job!
@ForgottenShineRestoration
Жыл бұрын
🤣🤣👍 Thank you! 🐢
So glad you gave turtle a welding helmet looks good on him.😊
@ForgottenShineRestoration
10 ай бұрын
🤣🤣🐢
Those colors together… WOW!!! Congrats!
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
I love the turtle so much 🥺
@ForgottenShineRestoration
Жыл бұрын
😍🐢
that turtle has literally seen everything after this video 😂😂😂
So beautiful indeed! Thank you 🙏🏼
@ForgottenShineRestoration
Жыл бұрын
Thank you so much! 🐢
I’m glad Mr. Turtle understood the importance of wearing PPE.
@ForgottenShineRestoration
Жыл бұрын
🤣🤣👍🐢
What a Gifted Person!!
Thanks for the updated content. 🙂👍🇹🇷
Excellent job sir, like the color combinations you picked out, haven’t seen a greasing application like that in years. Thanks for the video.
@ForgottenShineRestoration
4 ай бұрын
Thanks! 🐢
the professionalism of the unreal guy, congratulations on your work, I admire you a lot ❤❤🎉
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤗🐢
Always love watching your videos. Especially after a long day of work ill just watch vid after vid cuz i find them so relaxing ill even doze off.
@ForgottenShineRestoration
11 ай бұрын
Thank you 🤩💪🐢
Amazing restoration, you always put so much effort in and it results in a great end product!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
Amazing job. It looks so good after renovation. 👍👍
@ForgottenShineRestoration
Жыл бұрын
Thanks a lot! 🐢
The welding part was lovely edited! congrats!!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
Should have had a demonstration of using the pulley.
I can't believe how well it came apart, sure there were a few times a punch was needed hut for the most part it seemed relatively easy compared to it's condition and how it looked. Great restoration :)
@Spicii9896
Жыл бұрын
By the way, I think you should post longer format videos, you obviously work very hard at this and I think more of your work and time should be included, I'd happily watch a 30 minute video of this, you're so skilled
@ForgottenShineRestoration
Жыл бұрын
wow, thank you for your great Feedback! 🤩 🐢
Brilliant video.
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
I have two theories as to what that stuff caked in the pulley was: 1. It's manure/dirt from lying on a barn floor for many years 2. It's the disintegrated remains of the rope that use to go around it
@ForgottenShineRestoration
Жыл бұрын
I suspect the rope was pulled on the floor (full of poo) and then transported into the pulley...🐢
@vathraq2727
Жыл бұрын
I see a similar effect in my work. The pulley starts making noise. They put a lubricant. In this case probably grease. The grease, because it's wet, gathers dirt and dust particles causing it to cake up and dry. Then you have scrape it off to clean the pulley.
Nicely done! 👍
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
Bardzo świetna jest zrobiona ta robota pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
@ForgottenShineRestoration
Жыл бұрын
Dziękuję bardzo! 🐢
Hi, I'm just curious as to why you hand paint the items as opposed to using spray paint? It is an environmental consideration? You know, because of the aerosol emissions from spray paint? Thanks for your answer in advance. 🙂
Nicely done
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
Excellent restoration!!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
Great video! I recommend everyone to watch and enjoy the spectacle!!! Good luck, bro!!!
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
Beautiful work! And I love turtles welding helmet!
@ForgottenShineRestoration
7 ай бұрын
Thank you very much! 🐢 🤣👍
Stunning restoration, more like creation, lol, so glad to see turtle again.
@ForgottenShineRestoration
Жыл бұрын
wow, thank you for your great comment! 😁🐢
I loved how you showed us the welds!
That's not a poop IMO. It must be some rubber type thing over a pulley so that the rope is easily pulled without being friction with frame. Rope gets a grip and pull things easily. BDW Amazing work.
@ForgottenShineRestoration
Жыл бұрын
This was not rubber. It was poop or mud with straw...🐢
@kumar_ankit28
Жыл бұрын
@@ForgottenShineRestoration oh, my bad 😬
@mehere8299
Жыл бұрын
@@ForgottenShineRestoration It might have been asbestos.
I love that turtle 😍😍😍
@ForgottenShineRestoration
Жыл бұрын
😍🐢
Lol I love your turtle brush 😂
@ForgottenShineRestoration
3 ай бұрын
🐢👑❤
Good video as always!
@ForgottenShineRestoration
Жыл бұрын
Thanks a lot! 🐢
Great job👌
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
Perfect
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
Vídeo top demais ❤
I would rather you restore items, yes old stuff gets wore out and loose. We love your videos and don't expect every item you do to work even better than it did when it was first made.
Ich als Schweißer musste mir kurz die Augen zu halten 🙈🤭 Kein Phase und falsche Einstellungen bzw zu langsam geschoben beim Schweißen. Trotzallem machst du gute Arbeit. Mach weiter so 👍🏼🙋🏼♂️
Good job. Congratulations 👏👏👏
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
Impresionante!!!😮
@ForgottenShineRestoration
11 ай бұрын
Thank you! 🐢
good
Excellent restoration and a wonderful job restoring it also!!!! Enjoyed your video and I gave it a Thumbs Up
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
@oneshotme
Жыл бұрын
@@ForgottenShineRestoration You're very welcome!!
Lindo trabalho parabéns 🎉❤
@ForgottenShineRestoration
Жыл бұрын
Muito obrigado! 🐢
Great Work Bro well done❤😇
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩 🐢
good job Beautiful Restoration 👍
@ForgottenShineRestoration
Жыл бұрын
Thanks a lot! 🐢
That turned out very nice. I really like the colors
@ForgottenShineRestoration
Жыл бұрын
Thanks a lot! 🐢
Oh come on, all this great workmanship and not showing us this thing doung even a single rotation. Talk about blue balls
keep going you’re the best❤
@ForgottenShineRestoration
Жыл бұрын
Thank you so much! 🐢
We used these in the Army. Lol. Snatch boxes....😂
@ForgottenShineRestoration
4 ай бұрын
😅👍🐢
Thank the lord Turtle was there to help you
Nice restauration
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
I’m glad turtle had more of a part in this video. 🐢😊
@ForgottenShineRestoration
Жыл бұрын
🤩🐢
if you ask that question...the answer is almost always yes
Seus vídeos além de ser interessante é também divertido, me diverti muito com a tartaruga, parabéns
@ForgottenShineRestoration
11 ай бұрын
Muito obrigado pelo seu excelente comentário! 🐢🤗
I found a easy way to paint raised letters a pice of cloth over a cork from a bottle put the cloth over the cork put paint on the cloth and just dab on the letters I used to do head stones for a living painting the letters so much easier. Hope this helps you out.
@ForgottenShineRestoration
Жыл бұрын
Oh thats a helpful tip! thank you very much! 🐢
@Howiehamster
Жыл бұрын
@@ForgottenShineRestoration hay you so very welcome and I love what you do keep up the great work and I am from the uk and your the first person who has got back to me for giving tips thank you so very much
Sensacional 😍
@ForgottenShineRestoration
Жыл бұрын
Muito obrigado! 🐢
So nice as usual🎉
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
3:05 Staufferbüchse 🥰🥰👍🏻👍🏻
That pulley was once covered by a cow patty. This is a beautiful restoration.
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🐢
Hello mister beautiful restoration good job
@ForgottenShineRestoration
Жыл бұрын
Hello 🤗🐢
Супер.❤ Просто шикарно!
@ForgottenShineRestoration
4 ай бұрын
Большое спасибо за ваш приятный комментарий! 🐢
nice welding effect
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🤩👍🐢
When welding taps like that you should bevel the ends so u get a stronger weld connection and penetration
The best
WOW = That is some kind of pulley I would love 2 have = SO COOL👍👍 ❤
I said that it was a bicycle😂😂😂. Turtle always safe!
I loved your welding effect. I don't know if that was a filer, or an after the fact digital edit, but it was the first time I have seen it, and I REALLY liked it! Great job as always!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩🐢
Danke sehr schön das Video! Weil auch eine "Deutsche" Erklärung dabei ist! 😀👍
@ForgottenShineRestoration
4 ай бұрын
Danke für das Lob! 🐢
Turtles face when the lid dropped and made a mess was my reaction too
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🐢
Good very good 👏👏🌹🍀🍀
Aaah! Ne Umlenkrolle war das! Die ist ja schon ganz schön massiv! Und juhu, der Sandstrahler 👍 ich liebe das. Und ohne Schildkröte geht ja mal nix 😉 wie viel Arbeitszeit ist da reingewandert? Das Ergebnis kann sich auf jeden Fall sehen lassen, das steht mal fest!
@ForgottenShineRestoration
Жыл бұрын
Vielen Dank! In dieses Projekt ist nicht sehr viel Zeit reingeflossen, weil ja der Umbau der Werkstatt immer noch mit zu machen ist 😅🐢
Уважаю таких людей в ихних руках из мусора привращается в шедевр што не стидно в руки взять и показать друзьям товарищам воо.ще в ассовое обозрение ,оно стоит того ,можно смело дописать "отресставриравано с любововью!"
I liked this one. Good Job. and I just subbed abd liked.
@ForgottenShineRestoration
Жыл бұрын
Thank you very much and welcome! 🐢
@keithfreeman2139
Жыл бұрын
@@ForgottenShineRestoration I see you also sre able to read bad typing skills. LOL
This is the pre Historic CPU Fan Cooler from a mega Lithic Stone Computer
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🐢
@raginald7mars408
Жыл бұрын
@@ForgottenShineRestoration minimum 4 Million $$$$ never sell it for Future Archaeologists
Bei den Werkzeugen hast du den Schraubstock vergessen, der aus meiner Sicht ein Modell "Baumarkt" zu sein scheint. Vielleicht versuchst du demnächst mal einen alten Schraubstock zu restaurieren. Das Video ist ansonsten super gemacht, ich abonniere.
@ForgottenShineRestoration
8 ай бұрын
Vielen Dank und herzlich Willkommen. Der Schraubstock ist auch schon sehr alt und kommt aus der ehemaligen DDR. Ich habe sogar schon zwei Schraubstöcker restauriert 😅🐢
i completely forgot that turtle was a brush lol. hes also more expressive nowadays!(omg his welding helmet)
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🐢
You have super cool outcomes and always looks fantastic but........the turtle brush thing is one of the creepiest things I've ever seen.
@ForgottenShineRestoration
Жыл бұрын
😱😱🐢
Pes etme. İsviçre My mechanic kanalını geçersin tebrikler. 👍🙂
4 hrs till I need to get up.....pulley restoration it is!
@ForgottenShineRestoration
Жыл бұрын
😅🐢
What on earth did Mr turtle do to you to deserve such harsh treatment??? I demand you return him to his bed of silk sheets and provide snacks of his choice.
@ForgottenShineRestoration
Жыл бұрын
😳😱🐢 You're right, I'll go apologize to turtle
What's the measuring/scribing tool used at 11:29 of the video?
👍👍
👍👍👍
👍👍👍👍
Super Arbeit hast Du da her geschafft! Prima und die Farben...einmalig 🐢👍🏼😃
@ForgottenShineRestoration
Жыл бұрын
Dankeschön! 🤩🐢
Bro Op you are my favorite youtuber❤️🙏. I wish you reply to me.
@ForgottenShineRestoration
11 ай бұрын
Here is my answer 🤪 Thank you very much! 🐢
What compressor you use?
Forgotten Shine Restoration, what paint are you using?
@ForgottenShineRestoration
10 ай бұрын
Hammerite 🐢
Non so se poteva valerne la spesa, trattandosi di un oggetto non certamente di gran valore, ma per fare un lavoro più sicuro avrei messo dei cuscinetti. 😉
If that came out of a barn then yes, it definitely was poop.
@ForgottenShineRestoration
Жыл бұрын
😱😱🐢
The turtle felt so used
@ForgottenShineRestoration
4 ай бұрын
🤣🤣🐢
거북이 얼굴이 마음에 들어요😂
@ForgottenShineRestoration
Жыл бұрын
😍🐢🤩
15:37 I could've sworn that was cheese at first
@ForgottenShineRestoration
Жыл бұрын
😅🐢