Pt 6 Cylinder Head Installation with ARP Studs- Forged 4.6 for 2001 Mustang Cobra
Автокөліктер мен көлік құралдары
In this video I show you how I install cylinder heads onto the short block. On this build I am using ARP heads studs and Fel-Pro multi-layer steel head gaskets.
Please let me know if you have questions or comments below.
Website: JohnSmithRacing.com
Instagram: @JohnSmithRacingLLC
Facebook: @JohnSmithRacingLLC
Parts List (This Video):
ARP Head Studs PN: 156-4101
Fel-Pro Head Gaskets PN: 9790 PT-2 & 9792 PT-2
Ford Performance Block Kit PN: M-6026-A46
Parts List (Previous Videos in the Series):
Comp Cams Xtreme Energy-R (stage 2) Supercharger Cams PN: 106360
Comp Cams Valve Springs PN: 26123-32
Comp Cams Steel Retainers PN: 799-32
Valve Spring Tool: euroexportinc.com/
Ford windage tray/oil pan gasket PN: BR3Z-6710-B
Ford high volume 4.6 oil pump with pickup tube PN: M-6600-D46
Oil pump bolts: M6 x 1.0 x 40mm
Oil Pan PN: 264463
Oil pick up tube bolts: M6x1.0x20mm & M8x1.25x15mm
Oil pan bolts: M8x1.25x25mm
Play Doh
Freeze Plugs PN: 565-028
Oil Gallery Plug PN: 381-2098
3/8 NPT Brass Plug with Sealant
Ultra Black RTV
Пікірлер: 2
I'll never use Felpro head gaskets again. Failed after only 600 miles. Also it is very important to re-torque the studs/bolts after initial install as they do stretch. Good idea to let them set for 24 hours, back off 1/8 turn and re-torque. Can't believe this wasn't mentioned in this video.
Let us know how the Fel Pro gaskets hold up over time. They’ve been failing on me and others quite a bit in the last 2-3 years (pandemic era) and seems that they haven’t made any strides to recover from that issue..