Devin has every tool known to man in that garage ! Oh my goodness

I bought my powder coat set up after I watched you walk through it. The way you explain everything is A1.

I still don’t know how you don’t have 1mil subs yet

Honestly the quality of the videos on this channel is amazing. Thank you Devin for the effort you put into your videos!

this is awesome man! I always run big brake kits in my cars and I was always curious what it's like to reseal/refinish/rebuild them. I always had ideas in my head what happens when they are sent out but this is so cool to see you do it. I've been thinking about getting a powder coating set up in my garage lol. Keep up the good work!

This is the only channel I watch every video from start to finish without skipping. Keep up the great work bro!

Your passion for cars is inspiring!

Hell yeah! Nice bro! I've been wanting to get a set up so I can start powder coating things too

When popping your pistons out with compressed air stick a piece of wood 3 or 4 inch thick in the middle where your disc would be and blow them out if they don’t all pop out just push them back in till the stubborn one gives up

@ddegn

5 жыл бұрын

The screwdriver method sure made me nervous. I don't work much on cars but using a screwdriver to pry something out usually leaves a mark whenever I try it. Do you know if the screwdriver technique is a valid technique? It obviously worked but it made me feel uncomfortable while watching. BTW, Thanks for the video Devin. This reply isn't meant as criticism of the video.

@johnhorler9192

5 жыл бұрын

Duane Degn I don’t work on cars much myself but if you do use the screwdriver technique you do have to be careful because if you do slip and score one of the pistons it can cause brake fluid to leak so doing the compressed air technique is probably the better way just might take longer

Interesting process and the editing is good. Subbed.

Great tutorial bro! you make it look so easy! The calipers on my EVO IX are faded to hell! I need to learn your ways bro! Thank you for teaching us!

Man I wanna work on my E46 🚘, but school, finals, learning German and graduation exams don't leave me with any time to earn money 😤, not to mention work on my car! So Devin you are the only thing that gives me my fix!

That color gets me everytime😎👌🏻

Sick vid man! That’s cool you live in Spokane I’m pretty close to there

very nice work, Devin.

It’s gonna look sick with gold wheels 🥵🔥🔥

This should be named complete rebuild of brembos! Looks like professionals have done it

Good job man! You killed it! Come hungry leave happy!!

Hi great videos as always really nice content interesting to watch but did you miss some powder on the back of the calipers looks great now

Perfect - just about to do the same on my MY05 obsidian black pearl STi too - thanks for the video references! But where is the final job !

Thank you for a awesome video!

underrated channel tbh

Quality Job. Inspirstiom for me t do a DIY refurb on my evo wheels and brakes

Great tutorial!! Doing the same myself currently - I see you reused the original bolts to hold the halves together .... I’m struggling to find the torque values for the bolts - what did you do them up too? 70nM front and 30nM rear ? Anyone ? Thanks

Nice video would have been good if you included the brembo decal install and where you got them from.

Devin, with regards to the small crossover O ring inside the Caliper halves, did you remove this before baking and powder coating? Did you replace it with a new one? Also the bolts that hold the Caliper halves together, did you replace these bolts and what did you retourque them to?

Wow, great job love the vid..

Where do you get the new brembo stickers? Would like to do this to my black brembo's, probably not gold though.

I need a workshop like that.

Very nice ! Amazing!!!

Flawless victory.

Devin- any way you would know where I can pick up some of those bolts that hold the front caliper halves together?? Also, what’s the torque specs for for them as well? Any help would be much appreciated

Might be a dumb question. But asking because the video doesn't specify... Do you bake each coat individually? You bake the 1st coat, add the stickers, and then go back over the whole thing with clear powder? And what if you are doing multible different powder colors?

@brembo , sponsor this guy !

The legacy wagon 😍😍

i wish i had an oven in my garage

Powder coat them things man 💪

I need that sand blast media

What is the red thing u use for the o rings? And make u the o rings new or put the old one in?

Did you say what was the torque on the caliper halves? For front and rear.

What do you use for a torque spec for the bolts that mate the two halves together? Any thread locker on it?

Did you learn all this yourself or do you do any mechanical training?

Where do you Jack your car up at? It looks like somewhere in the middle of each side?

After watching this I'd be surprised if the pads don't stick. There are small metal pads that I believe are bare stainless. They were left on the caliper and then powdercoated. The tabs on the outer edges of the pads ride on them and the coating might make them stick.

how does the centric rebuild kit work vs original brembo? the brembo kit is a hell lot more expensive

what was the name of the gold color you did on the first caliper but didnt like?

Awesome

How did you get the brembo logo in red on the side? Is that just a sticker?

Awesome 👍. Where did you get the new brembo stickers?

@Dinzdale40

5 жыл бұрын

i'd also like to know!

😩 i want my brembo on my ice silver sti powder painted that color 🔥

Hi can I reuse the seals I took off the caliper?? Please an answer thanks

It's crazy that such a small car that comes with from factory around 270hp has brakes big enough to stop a top fuel dragster.

Where u got the little O ring????

And how much torque the 4 big bolts get???

How did you make this red bermbo logo back again?

Hi, what is the caliper brake pad sliding plate torx screw size?

Is that a Trans Am GTA under that car cover?!

Where did u get the seals?

What torque toy use for the screws?

mint

@Dvniemela

5 жыл бұрын

Bobbi Wallace you’re mint.

@ivanbueno5010

5 жыл бұрын

Bobbi Wallace can I be the son?☹️

❤️

Genesis coupe❤️ brembo brake

Is that Cameron’s garage

Would you ever do a give away and give away does Subaru sti

The Brembos now LOOK BRAND SPANKING NEW MAN😳😎. However that is a TON of work for that end result🙄.

very curious how you got the "Brembo" in red? since we didnt see you do it... other wise seriously impressive being able to do everything yourself hahah but also expensive equipment to be able to do everything ahha

@siddhuravichandran8872

5 жыл бұрын

They're stickers

@ddegn

5 жыл бұрын

@@siddhuravichandran8872 *Edit: Never mind. You are right! Thanks for the info.* Are you sure they're stickers? I couldn't see any lines around the text at the closeup at 18:50. I would have guessed he used a stencil and red paint.

@ddegn

5 жыл бұрын

@@siddhuravichandran8872 Those are cool stickers. I found a video titled *Guide: Installing Caliper Decals* which shows how they work.

That's not redline assembly lube is that?...

Ohhhhhh

17:56 who’s car is that ?!!!

hey devin i would recommend a go pro head strap so you can get pov view of cleaning the sand blasting etc......

Drilled and slotted rotors

@Ripkallen

5 жыл бұрын

Slotted? Yes Drilled? NO

18:36 😂😂😂

Is that Kapton tape?

@ddegn

5 жыл бұрын

There's a link to the tape in the description. It's made with polyester. Kapton tape is made with polyimide.

Okay so this comment isn't for this particular video but one of your videos in the past you were talking about tuning your Evo through this website www.apexpoweredtuned.com/ I'm currently doing the Evo X build where the Stroker motor and it's fully done I had a friend of mine do a break in tune for it but now it's broken in and I need a solid tune I looked on the website and they said it was cheaper for a local tune so I was wondering if you knew where they were based out of thank you I love your videos I love your builds especially the evos keep the videos coming man I appreciate it

this job is beauty but never forget where those brake pad are seated...dont paint on that........from a friend of b-quiet commandite...peace bros

Bro I didn’t get the notification 🤦🏼‍♂️

you don't paint or powder coat rotors. maybe a resurface hmmm

Yooo

This guy looks like matt damon

I wanna see the orange car back on fire

How many lbs would you say for this powder coat? GangGang. Yeeee.

説明がうるせー 何言ってっかわかんねぇし