Hey Guys, As you have probably noticed already i have updated the channel name and logo. The channel is no longer Really Random Channel it is now RRC Restoration. Just incase you were wondering why the water marks in the video still say Really Random Channel. Enjoy.

@sagedarwin3024

2 жыл бұрын

instaBlaster

@antoniosuarez2171

2 жыл бұрын

@@sagedarwin3024 aaqqqññ

@antoniosuarez2171

2 жыл бұрын

@@sagedarwin3024 q

@antoniosuarez2171

2 жыл бұрын

Qqq

@antoniosuarez2171

2 жыл бұрын

@@sagedarwin3024 qqqq

Perfection. I see others try this, and fail to protect machined parts from sand blasting. They use the wrong fluids in the wrong places. Your efforts to prevent cross contamination are second to none, in the KZreadverse.

@RRCRestoration

4 жыл бұрын

Thank you so much for your kind comment :)

@game4alaughman

3 жыл бұрын

Yeah, but just a shame most people watching doesn’t have a Scooby what the F the fluids are pal

@byloyuripka9624

Жыл бұрын

for the smaller passages i think ear plugs would be a great fit, just roll them up like youre putting them in your ear and then pop them in to the threadi g

This is the most rewarding video I have watched. There's just something about being able to fully restore something, and the process that comes with it is so satisfying.

@RRCRestoration

3 жыл бұрын

Thank you, Glad you enjoyed it :)

George had his mask on and was social distancing lol. Once again, a perfect restoration!

I have done this exact restoration on my Subaru 4/2 pot callipers. I purchased new bolts and clips because they were so cheap. I polished up the pistons and installed the rebuild kit, repainted the callipers and 4 years later they still look as new. Was such a worthwhile process considering how super expensive these callipers are to buy new.

@salacommander2674

2 жыл бұрын

I'm thinking upgrading my '04 WRX to these calipers, at least for the front wheels. Would you say they're worth the cost?

@bluewffl8472

9 ай бұрын

​@@salacommander26741000%.....02 wrx here blasting off daily with 305hp/304tq...stopping is definitely worth it...good pads too...brembo makes decent pads/rotors for these too that aren't too expensive imo.

You should definitely do a how to ‘re-plate’ at home video👍.

@ro63rto

4 жыл бұрын

Been hoping for one. Want to learn so I can try to replate some vintage watches.

@typgamer

3 жыл бұрын

@@ro63rto Go to Cameron Niemelas KZread channel he did a very specific guide how to plate bolts.

I cant explain the satisfaction of seeing old this new again. Great job!

You really went above and beyond with those. If I had found those calipers at the junk yard I would have put them straight on my car pads and all.

I definitely prefer the Subaru livery, they came out perfectly. Ill never tire of watching you plate parts, always so satisfying :)

Good to see George is safe and well - and wearing his PPE 😀

Beautifully done. I've never seen someone take so much pride in making sure all the details were done correctly. Thanks for sharing.

@RRCRestoration

3 жыл бұрын

Thank you so much for your kind comment :)

Anything in shiny red gets my attention immediately so I appreciate all of your attention to detail.

Why would someone give thumbs down to a video like this? There's no complacency...

@BillClay88

3 жыл бұрын

Subaru owners who don't have the BBK. Fk em.

@game4alaughman

3 жыл бұрын

FOCUSST cause mibbies most folk don’t have a Scooby what bloody fluids he used ?

@vojvoda9060

3 жыл бұрын

Only idiots....

@shippo72

3 жыл бұрын

I can only think of a couple reasons, mostly because the brakes were perfectly fine before "restoration", although they were dirty and a little ugly. And some people don't like painted calipers because the brake pads can get so hot that cheap paints flake off like dry skin.

@BillClay88

3 жыл бұрын

@@shippo72 what about powder coated?

So amazing!!!!! Perfect job man! You have tons of patience!!!

Great job as always dude. Hard to choose between the brembo and Subaru calipers as they are both absolutely perfect 👌

The attention to detail was extraordinary, reflected in the finished product.

Best resto channel on the tube, Squire. No fake rusted up shite, just good old no nonsense, real life work.

@RRCRestoration

4 жыл бұрын

Thank you so much :)

Perhaps this video can be used to teach how perfection is achieved. Great job.

Your videos never fail to amaze, keep up the good work!

Nice to see George wearing his mask! Nice work 👍🏻

@RRCRestoration

4 жыл бұрын

Thanks! 👍

Stunning restoration of those calipers. It seems a simple process but very exacting. You definitely have to know what you are doing. 👍🇦🇺

Just tore the 4/2 pots of my WRX this morning to rebuild. This helps a lot!

@kendalja78

10 ай бұрын

What torque specs did you use for both?

Wow! You've done an absolutely marvellous job restoring those Sumitomo WRX calipers. Two thumbs up!

@RRCRestoration

4 жыл бұрын

Thank you :)

Superb restoration, perfect paint job 👍

Pintura impecável! 👏👏

Absolutely beautiful 👌🏻

@felixschellenberger3480

4 жыл бұрын

holy shit my two favourite youtube channels and one just commented on the other ones video

@RRCRestoration

4 жыл бұрын

Thank you very much , Always a pleasure to see you in the comment section :) I see that your Fiero project is coming along nicely 👍

Simplest things always look good when you restore them....Oh, and it's always about having the right tools to do the job. Nice video, very therapeutic to watch!

@RRCRestoration

4 жыл бұрын

Thank you very much for leaving a comment, very glad you enjoyed watching it :)

the patience you have is phenomenal great work mate 👍

@RRCRestoration

4 жыл бұрын

Thank you :)

If those aren't the CLEANEST brake calipers... Man... Also the detail this man puts into the calipers... Insane 🤯

@RRCRestoration

3 жыл бұрын

Glad you liked the final product :)

Great content!! As an Evo X owner (Although, I very much appreciate & respect WRXs/STIs), you did an outstanding job on those calipers & bolts!! I wish my calipers looked as good as those do!!!

Wow, those came out really well!

Beautiful restoration. Makes me realize I should just buy a new set!

The Brembo brakes came out great but the Suburu's have more style! Great job on both though!

@RRCRestoration

4 жыл бұрын

I totally agree! :)

Well done Mr. Random. It’s also interesting to see your editing skills evolve over time. 👍

@RRCRestoration

4 жыл бұрын

Thank you very much :)

Amazing work , i have a jdm wrx myself and am thinking of restoring it

Pleasure to watch ! Clean job ! BRAVO ! Thanks !

@RRCRestoration

4 жыл бұрын

Thank you! Cheers!

Awesome workmanship done right!!!

Very impressive lad, as always excellent work, looking forward to seeing more

@RRCRestoration

4 жыл бұрын

Nice to see you, Glad you enjoyed the restoration :)

Great camera work lots of close up details thank you

Awesome job again mate .i honestly couldn't choose between the 2 Would have to eye them up on the car 🤷‍♂️

@RRCRestoration

4 жыл бұрын

Thank you :) Yeah they are quite difficult to choose between

Did this myself about 2 months ago, rear 2 pots too, didn’t sandblast or etch primer them but they Turned out pretty good imo

Such an awesome video… loved watching it . Gunna try my own now

Look better then new...very nice job.

@RRCRestoration

4 жыл бұрын

Thank you :)

Master of your craft sir. The amount of work that goes into restoration, then the filming and editing. I'd buy you a few pints.

Fantastic video again! Thanks for posting, mate! 😁

@RRCRestoration

4 жыл бұрын

Thank you for watching :)

You really brought them back 👌😎 support from Las Vegas

@RRCRestoration

4 жыл бұрын

Thank you very much :)

these look bloody great... what a piece of work... awesome...

@RRCRestoration

4 жыл бұрын

Thank you! Cheers! :)

Once again, lovely work, top job mate, always look forward to your videos, 👍👍👍👍

@RRCRestoration

4 жыл бұрын

Thank you! Cheers!

You are a one man factory sir!

Damn, those are better than from the factory! I'm a Brembo fan, but the Subaru logo looks very nice. Excellent work.

@RRCRestoration

4 жыл бұрын

Thank you very much :)

Excellent job mate, they look great. Thanks for sharing. Cheers

@RRCRestoration

3 жыл бұрын

Thank you! Cheers!

amazing work!!

Nice... I am inspired... I will be doing this to my 4Runner brakes...

perfect restoration, keep uploading videos of the subaru

@RRCRestoration

4 жыл бұрын

Thank you ,Plenty more to come ;)

Nice job. Anyone doing this at home you should use stainless pistons. The nickel whatever coated ones will stuck in a year. Also neat trick you can do is instal those pad pins backwards and do a cool aviation style locking wire setup on the outside.

Another amazing video! Love from India 🤘🏻💕

@RRCRestoration

4 жыл бұрын

Nice to see you again, Glad you enjoyed it :)

I would like to see more please lol. Both Subaru and Brembo looks amazing but would prefer the brembo on my subie as i have tested them both and got great stopping power with it. Love the vids, keep em coming ama keep on liking em cheers..

What’s the torquing specs for the bolts? Beautiful job by the way came out looking better than before!

Brembo, this is beautiful

Nicely done they look amazing

@RRCRestoration

4 жыл бұрын

Thank you! Cheers!

You have some serious tools at your disposal. The machine for cutting the sticker out haha! Love it. I have alot of kit myself but in a 1 car garage Ive got no room to moving making any task under the car a damn nightmare. Amazing channel mate. You have a new subscriber! Keep them coming.

It’s crazy how well electrolysis works. I did this on a bigger scale with some rotors to experiment and boy were the results just crazy. Rust be gone!

They turned out really great - as usual I must say! 👍👍👍

@RRCRestoration

4 жыл бұрын

Always a pleasure to see you, Glad you liked the restoration :)

@jrand2631

4 жыл бұрын

@@RRCRestoration Thank you very much, and I'm here although I've been somewhat absent lately - you know Covid-19 and such. :)

Wow those look great!

I had a 1999 GC8 that I bought new here in the US that I had to import a complete STI drivetrain to make it a WRX. Now I have a 2020 STi and I still miss that GC8. Super jealous of your build and really appreciate you doing all of this to keep her on the road.

@RRCRestoration

4 жыл бұрын

Nice :) Glad to have you along for the ride.

You’re a very talented guy....

Fantastic work! Nothing like a Sand blasting machine to clean old parts..

@RRCRestoration

3 жыл бұрын

Yeah i would be lost without it now

Beautiful job 👍

now i regret selling my top to toe V4 Type R restoration now...that said, Ive just bought a pair of knackered calipers and plan to restore them for my R53 big brake kit mini cooper project! thanks for the inspiration.

Very nice work.

Excellent viewing. Nice job.

@RRCRestoration

4 жыл бұрын

Thank you :)

You did an excellent job!!

@RRCRestoration

3 жыл бұрын

Thank you :)

Good to see george being safe! Haha I havent watched all of it yet but I already know these are going to look gorgeous. I stayed motivated from the last Subaru video and gutted my forester interior the other night and deep cleaned all my carpets, removed the seats and shampooed them etc. So thanks for the motivation mate :)

@RRCRestoration

4 жыл бұрын

Nice, I cant wait o finish the mechanical work and give the GC8 interior a good deep clean aswell its absolutely filthy haha

@samcoote9653

4 жыл бұрын

@@RRCRestoration its so satisfying!

They look great! Go with the Subaru calipers 🙂🚗

Looking fresh!

Now that’s sympathetically restored

Looks amazing! 👌🏽

Fekkin brilliant! I need to do this with mine which are identical except they have "WRX Pro" embossed onto them. Thumbs up.

Nice quality work as always

@RRCRestoration

4 жыл бұрын

Thank you very much :)

Loved the plating in particular, but the whole video was so satisfying. Personally I prefer the sumitomo (subaru) calipers, since they fit under 15s.

@RRCRestoration

3 жыл бұрын

Thanks for leaving a comment :)

Hi my friend 👋👋👋 your clear and impeccable restoration work always inspires me, respect to you 🤝👍👍👍🔥✌🏻🇷🇺

@RRCRestoration

4 жыл бұрын

Thank you so much :)

Very nice job! I appreciate your work! PS: i have no SUBARU, I will go with BREMBO 😉

Looking great!

Beautiful job, and they look much better with "Subaru" vs "Brembo"

@DennisKarlsson

4 жыл бұрын

"They" are two different brake calipers.

Beautiful job!

@RRCRestoration

3 жыл бұрын

Thank you!

Great video. If you release the spring clip first, the pins can be easily removed without a punch normally.

Subaru brakes cuz you fixed it all up nice and dandy. Wasnt aware that you could get a brake caliper repair kit. Awesome work as always.

Wow both are stunning but i do prefer the Subaru's. Great watch.

I had front and rear wrx brakes on my Legacy wagon. Machined both down, to a smooth finish, and placed "LEGACY" on the front ones (similar as original) and the jdm "L" from the Legacy's of the time. Miss that car.

Great job mate

Beautiful. I would display them on the mantle piece.

Beautiful resto of those grubby ole calipers, now look out of the box brand new!

Sos un artistazo!!. 👍

So jealous. If only I had the equipment and space you have at your disposal

Subaru calipers, because I have them. Nice video Bro, great job.

Amazing job 👏🙌👏👏👏

Essa cara é o melhor!

Amazing job! If I could do this type of work for a living I’d sign up immediately. 🍻

@RRCRestoration

Жыл бұрын

Thank you :)

Great job. Want to put some on my subaru forester so bad

Look OEM, outstanding job

@RRCRestoration

4 жыл бұрын

Thank you :)