Choose the Right Pad for the Job! - Hex-Logic Polishing Pads: bit.ly/3N2ze7O

@trumanhw

11 ай бұрын

You guys should think of providing amazon links to each product by both color & time ...

TLDR compound + polish combos (descending order of aggressiveness): Cut: Orange Hex: V32, V34, V36 Green Hex: V36, V38 Finish: White Hex: V38, P40 Blue Hex: glazes (Blacklight, EZ Creme, etc) Black Hex: wax (Carnuba Creme, Butter Wet Wax, etc) Red Hex: sealants (Jet Seal, Top Coat, etc)

@TheCincyViking

7 жыл бұрын

Thanks!!!

@lowriderfever

5 жыл бұрын

Would orange be used with rubbing compound?

@lumpyrex007

4 жыл бұрын

what about yellow. WHAT ABOUT YELOOWWWWW!?

@crazybicboy

4 жыл бұрын

@@lumpyrex007 yellow is the heaviest cutting pad like if your paint has scratches that are deep and you cant get them out with the orange

@streetboyz1096

4 жыл бұрын

If polishing is used to bring out shine and remove scratches, and there are harder pads that u can use, why do u use “compound”? Also... is green and orange pads for compounding and the ones on the bottom for polishing?

Great vid. Thanks for the explanation. It's nice to see the breakdown on all the pads. Thanks again!

Thank you guys so much! I have all the hex logic pads, but I've been using them wrong and getting frustrated. This video has shown me exactly which pad I should be using. Thanks again for taking the time to make the video. Reminds me, I need to order a few new pads!

9:25 LOL "Now you know which pad DO'S WUTCH!" Very informative!

@adamyoung9777

7 жыл бұрын

jhchapman5150 lmfao

@TheRzarectah

7 жыл бұрын

im cryin

@enthusiastsigaming8426

3 жыл бұрын

bro that had me rolling

Please balance your volume. Good stuff though, love the video.

Than You. Enjoyed this because I learned something important about the quality, selection to use the right pads for the right resulting in an excellent car polish job. Using the right pad is important as you do not want the incorrectly use a pad not suitable for a particular and demanding job and ruin a car's paint worth several thousands of dollars. Its illuminating and enjoyed it very much.

Very informative, well put together video. "AWESOME!"

Just what I was looking for, as a beginner this is invaluable. Thanks Greg!!!

Thanks Greg! Just got my 7424 XP today! I can't wait it to experiment with your guys products

Well explain thank u..pink for cutting removing swirl mark and scratches, White for polishing Black for waxing and Red for coating

@ChemicalGuys

6 жыл бұрын

Hi! Check out the chart below to see all the color pads and their uses. It's a really useful thing to have around the garage. Thanks for watching and make sure to check back tomorrow for a new video upload! www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

@MrBobbystu

5 жыл бұрын

Chemical Guys so is this universal?

Thanks for the video! Very helpful!

3:32 "Every peen is different" Sorry, I just had to. Appreciate the video, it's helped me a lot!

I appreciate your honesty on educating us!!

@ChemicalGuys

Жыл бұрын

Happy detailing!

Thanks! exactly the explanation I was looking for

@ChemicalGuys

4 жыл бұрын

Happy detailing!!

Great video, this really helped me.

Great video what would you recommend for a single stage paint found on old beetles? Thanks for your help I'm fortunate to have a Chemical Guys in my city !!

Great informational video. Looking to do my e46 soon.

@ChemicalGuys

5 жыл бұрын

Hi StanceTv! We always love awesome feedback. Stay tuned for more videos coming your way. Thanks for watching and thanks for being part of the Chemical Guys family!

I'm a big Chemical guy fan here. Their products, along with the videos have educated me a good bit and I'm thankful for that so Cheer's!!

@ChemicalGuys

3 жыл бұрын

Thanks for the amazing feedback!

I was wondering if I was using my microfiber correctly. Glad I'm using for final polish. I thought it was maybe cutting like wool. Turns out I need wool for an agro cutting pad. My pads are cheaper and different via Amazon, but this was helpful. I definitely see the value in chem guys pads also, which might make me purchase in future once I learn basics with my vehicles

Best video I have seen that actually explains the pads. What do you recommend for older nissan frontier paint?

I couldn't really find anywhere that explained what each pad did. Thank you for the video now I know which pads to buy.

@ChemicalGuys

5 жыл бұрын

Hi Derek! Thanks for the awesome feedback, we are glad that you liked our Polishing and Buffing video. Happy detailing!

Thank will do! I apply 50/50 by hand but I am new to the Carnuba and Liquid Carnuba....

Thank you

Hi, I really don't understand at full about Paint types (Hard, medium, soft or something). So what paint type would my Audi A3 2010 would be? it's a dark grey, almost black. Besides, what type of pad should I use for cutting / polishing / finishing) thanks

Very cool information! Thanks for sharing!

@ChemicalGuys

5 жыл бұрын

Thanks for your awesome feedback and thanks for watching. Happy detailing!

Cool, thanks. I'll have to try that out.

Great video, any specific combo recommendations for VW/Audi paint?

Foam color chart for dummies (beginers) Thanks, the video was helpful!

@ChemicalGuys

2 жыл бұрын

Glad it was helpful!

Thanks for explaining the wool pad.

@ChemicalGuys

5 жыл бұрын

Happy detailing!

Thank you for all information!

@ChemicalGuys

7 жыл бұрын

You're welcome David! Glad you found this video useful. I think this video is a little bit better in terms of explanation. kzread.info/dash/bejne/qKKLmbJwirK6ZJc.html

The Most wonderful video I ever seen Love your videos brother

@ChemicalGuys

11 ай бұрын

Happy detailing!

Thanks for the tips

Every Paintwork is Unique. Even in a specific manufacturer, the paint can differ from model to model. Every paintwork requires a "Test Spot" to ensure you have a proper combination. I would recommend to start with V36 and an orange pad as a baseline then adjust the pad or polish accordingly to achieve the desired results. -Greg@CG

@makendysainger1481

Жыл бұрын

Great vid I wish I can see the vid for each one of them

Been waiting for this video!

Awesome video! What pad/polish would you recommend to remove light-to-moderate swirls on a WHITE Mercedes GLK? (would be using a Porter Cable 7424XP)

Thanks for this video. What pads would you suggest I use on an 05 Navigator. It has been neglected through the years and has plenty of small scratchs. I want it to look good, I dont think I want to go through cuting, polishing and then wax. Can i go straight to polish and wax or would that be a waste of time?

I'm glad you guys started using a separate mic to pick up your voice, I can actually hear what's being said now. Great videos, I plan on buying a bunch of stuff once spring rolls around

Need to remove swirl on my Black Denali Yukon. I'm going to use Porter 7424XP what would be the pads you use from your polishing pads

hi the video is perfect for the beginners who wants to get their cars polished.question: I have a bmw x5 2008, does it have a hard paint or soft paint?

very helpful video....thanks!

@ChemicalGuys

8 жыл бұрын

Thanks for watching and for sharing your feedback!

great explanation, thanks a lot, I just bought a new car and it does not have many swirls, still I want to correct the most as possible before coating, sadly in my garage I can't use my polish machine, but since it does not have many deep swirls I will do it by hand. which pad would you recommend me to do this job? thanks in advance.

Very comprehensive explanation of the various types of pad. Thank you.Ps: Ignore those who accuse you of "stalling and repeating". Sadly, these days, many people have the attention span of a gnat.

@TheEgg185

6 жыл бұрын

Yeah. They have no patience. I wonder what they're like in the bedroom.

@fircombehall7495

6 жыл бұрын

Very 'handy'.

@leocrossfield

5 жыл бұрын

I agree - good call.

Great info I like lake countrys pads personally

@ChemicalGuys

6 жыл бұрын

Hi James, Lake Country pads are excellent pads! Thanks for being part of the Chemical Guys family! -CG Javier

Thanks for the video; do you have a video on care and maintenance of the pads? Are they one and done pads or reusable?

@ChemicalGuys

8 жыл бұрын

Check out these videos for great pad cleaning tips, tricks, and tools! kzread.info/dash/bejne/dG2gp6ZqgLPbfLw.html kzread.info/dash/bejne/Zqqa2LJqipW4ZLg.html

What kind of pad would you use for a fiberglass rv with a gel coat? I’ve heard wool is best

Need advice on what pads to use for a 15 WRX with very minor defects. I've got V36+V38 and a HF DA with a CG 5" backing plate on. I know that subaru paint is relatively soft...my goal is to polish-seal-wax.. My lineup: 5" CG Backing Plate V36 V38 Jetseal CG Butter Wet Wax

I bought your Vss one step to use on my Vette .which pad would you recommend and how many pads will I need. (First time using da) Thanks

What would you recommend on a 2000 explorer pearl white finish. Thanks

Hey CG, which pads work best with 2007 BMWs? Polishing and removing some scratches.

Great video!

@ChemicalGuys

3 ай бұрын

Glad you enjoyed it!!

Do you have any recommendations for alumigrip found on aircraft?

I want to do a two step process(polish pad & finish pad) on a '07 Altima. It has light oxidation and light scratches. What two pads, polish, & wax do you recommend?

I have some 7075 aluminum I want to polish and have all hexlogic pads including the compound pack that's often sold with it. After rough sanding with 80 to remove machining marks, which pad and compound would be recommended?

What if I use the black pad for a finishing polish like Menzerna SF4500? It would still have the amount of cut the polish offers right? And if I jump up to a white pad with the same polish, this just offers more cut?

Thanks for info learn alot

what combination of pad and polish do you recommend for applying a light swirls remover and sealant \ wax on a 2004 nissan 350z?

what pad do you recommend for a 2014 Jeep Grand Cherokee. I was thinking the orange hex

Does the green have any cut at all? Could i substitute the orange for the green if i have soft paint?

Is there like a diagram I can print out

@craigs.8231

7 жыл бұрын

Yes there is and all their training can be found here - www.chemicalguys.com/HOW_TO_ARTICLES_s/338.htm

Excellent video. How about which pads for epoxy resin?

@ChemicalGuys

4 ай бұрын

Hey! Use a Yellow or Orange Hex-Logic Pad for cutting then refine with a White Hex-Logic Pad.

thanks for this info!

@ChemicalGuys

2 жыл бұрын

Glad it was helpful!

Very informative, thank you. Can you point me to a video that demonstrates what stage to either clean, replace, or disgard the pads?

@ChemicalGuys

7 жыл бұрын

We have two other videos showing you how to clean your polishing and buffing pads. Check it out! kzread.info/dash/bejne/dG2gp6ZqgLPbfLw.html kzread.info/dash/bejne/Zqqa2LJqipW4ZLg.html

Im looking to buff resin. I start out at 200 grit sand paper and work my way up to 2,000. after Im using a novus 3 step polishing comound. Then I hit it with a 3M 35928 Finesse-it II Marine Glaze to remove the very fine swirls. What polishing pads would you reccomend for to achieve a clean polish without any scratches?

Those pads look like they were sized by a guy who drives a lifted truck with 40" tires 😂 No, but seriously. Thank you for the product knowledge!

help.. I have an 07 C6 Corvette with black paint. what pads do you recommend? I don't have swirl marks. I am going to clay the car and then proceed from there.

Hey everyone! I just bought my first rotary polisher today am i'm extremely excited to move up from a random orbital. Anyways, I did have one quick question that wasn't in the video. What about waffle cone pads? are they any better? Can someone plz explain, thanks.

How to I know whether my paint is (Hard, medium, soft or something)? I did a ground up restoration on a 1988 Alfa Spider, but I'm not sure of the paint.

Hey guys, Love the videos! I just got myself a Porter Cable DA, and I'm excited to get started detailing! I'm currently working on a 2001 Subaru, and the Orange, Green then White is working really well! But I'm moving onto a 2013 Hyundai Veloster, and its simply just swirls and mildew. I don't know which cutting pad to select, as this paint is thinner than the subie and from my knowledge a soft paint and I don't want to cut too much out/cut down to paint. Have any tips or recommendations?

@soundlesssundew

Жыл бұрын

Did you figure it out?

What PAD is recommended for a 2007 Honda Ridgeline? Hard/Soft/etc.? About my project, the clear coat has swirls and other similar scratches (imperfections). I want to correct the swirls, polish and then apply some coating (most like ceramic--no pad necessary there).

I have a 6" backing plate on my DA, biggest hex pad I can find is 5.5inches, currently have a dodojuice 150mm pad, backing fits fine but the sponge overhangs a little. Will a 5.5" fit my DA? Cheers.

HI. The issue is in 4" I can not get a Blue pad (finest polishing one). It does come with a black pad however. Can this pad still work with polishing as I imagine it's the polish that's doing the work even if it's on a soft pad?

Super nice. Thank you.

I need 2 pads. One to removes fine little swirls. Another one to apply ceramic sealer and make it shine.. I owen a 18 black silverado. Any suggestions on what pads to use for black paint

Thanks

Any Tips for polishing my 2010 BMW F800GS windscreen? Weathered with light scratches from all the off-road riding and dirty water drying on it.Mike.

dude if I wanted to compound and polish chrome with pad do you suggest I use.

Hey, great videos :-) Silly question then... Whats the best order to completely correct the paint and get it looking good? Cut, Polish, Wax and then Seal? Thanks Karl

@larrybealer5998

7 жыл бұрын

Dude I'm color blind what pad should I use?

hello I accidentally ordered the vss instead of the v36 for my blue Subaru and I got the green one is it OK to use the vss product or do I have to buy the v36 I have light swirls and little to rare scratches

What pad would you use for fixing new clear runs? Great video!

@norwoodaerialimaging9795

4 жыл бұрын

funridersusa sandpaper

is my first time doing polish on my 2008 white f250 the paint show small particle of rust. what pad should i use and what product should i apply

After using a paint correction product is it correct to then apply sealant and then finishing wax... ?

Very informative, thankyiu

@ChemicalGuys

2 жыл бұрын

Glad it was helpful!

hello guys when i polish i used yelow or orange,white,black,red pads. Please tell me on wich speed must i polish with DA polish maschine .

Do you have to dry the car after your wash the Mr Pink foam off with water?

Thanks for explaining the polishes... now it makes sense...

@ChemicalGuys

5 жыл бұрын

You're welcome, Julio. Check out the article below, too. It clearly lays out which pad and chemical you should start off with and where you should go from there. Thanks for watching, Julio, and thanks for being a part of the Chemical Guys family! www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm

If time is not a problem and I have all the products, should I do a 2-3 step polish and finish with V38? I am asking because sometimes I see that you stop at V36 and was wondering if you stop there because the V38 would be overkill? Also I have a white 2013 volkswagen jetta and was wondering if that paint is considered ''hard'' or ''soft''? I tried V36 with an orange hex pad and it removed about 20% of the swirls. Should I try V34 or even V32 with an orange pad? I am affraid to go to aggresive. I have the torq 10FX and use it on speed 5

@brandonkapana2453

7 жыл бұрын

try sticking with the V36/VSS but switch over to the mircofiber pad. If that doesnt work u can switch over to a 34 with a yellow pad, and if that doesnt work then switch back over to a microfiber pad again and so forth. Just work your way down from least aggressive in pads and compounds. You'll see that there are many different combinations that could get the job done! hope this helps.

What's a good pad for removing water spots on paint and glass?

My order of blacklight car wash and glaze arrived yesterday. I'm going to get the harbor freight polisher today. I plan on washing the truck claying it putting the blacklight glaze on then using the wet butter wax. Can I use just the orange white and black pads for that whole process? Or would it be better for me to purchase the blue pad for the glaze? I'm new to this so any information will help.

@ChemicalGuys

6 жыл бұрын

Hey Jason, sounds like you have a great plan of action! Yes, you can use the orange and white pads for the polishing process, then use the black pad for the glaze and wax. Check out the link below for more information and tips to use while polishing! Thanks for watching Jason and happy detailing! www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

Hi I have a 2010 toyota camry with light scratches what pad and polish do you recommend? V36 and orange pad?

So is this same color coding an industry wide standard?

@coreybenson3122

8 жыл бұрын

in general, yes. But always double check.

I'm in the process of polishing a 1946 Teardrop trailer that's made out of aircraft aluminum that has oxidized, and I've done one side of the trailer by using Blue Magic metal cleaner which came out okay but was a lot of work I'm not going to try with pads on side but was wondering which pad I should use to apply the Blue Magic metal cleaner with? The wool pad or one of the foam pads? Thanks for any help you can give .

@ChemicalGuys

4 жыл бұрын

Hi there! Using a microfiber pad will easily cut through oxidation and stains using metal polish.

Can I jump straight from a yellow to white pad or do I need to use an orange one? Will be using on a c6 Corvette

what type of pad should I use to remove overspray paint. neighbor was painting his home.

Is there such thing as a list as far as names of cars that have harder paint and softer paint like you mention F-150 Corvette has a hard paint how about a Honda or GM product. How would you go about finding out if it's hard or soft paint on the vehicle you're working on?

what color pads should i use for BMW e39 M5 paint? what compounds should i use? thanks

Question from your experience what kind of pad does Toyota paint respond to well ?

How about Scholl S20 ? I have managed to remove pretty heavy swirl marks from careless washings in 3 passes. Used wool pad but with wool been as human straight thin hairs. Pad went dry in seconds. Every half of the pass had to reapply S20 and moisture pad with spray water. Loved the results but process and amount of product made me cry. Tried medium firm thick none flexi pad but for noob me it was jumping in my hands and i could not get to hard to reach , places and bends .... Could you please recommend some flexi pad for Scholl S20 1 step compound. I need flexy so can press on the edge and get it flexing over bends. Please Kind Sir

What do you recommend to yuse one BMW i heard the paint is also really hard you van start Shit Orange pad and v34 than switch to v36 and finish whit v38 or v40 on white pad ?? I polished nu dat a while ago but i have some small swirls again how can i get them adat whitout harming my paint ?? i want to Clay my car again and iron X + finish whit sealant wax and reload spray Can you help me out the best way is to get the swirlls out and get a smoot paint again sten i have tuis probleem again .. Regards kenny

Do orange pad can be used for removing small scratches on windshield?