Walmart’s New $70 Polisher & $7 Polishing Pads! They Are Cheap but Are They Any Good?
Автокөліктер мен көлік құралдары
Walmart just released a $70 Dual Action Polisher and $7 Polishing pads. The question is if they are that cheap can they be any good? We are going to find out in this video.
If you are looking for compounds or polishes for look no further then my website where you can find hundreds of detailing products and supplies at a great price. Here is a link to my website: fabdetailsupplies.com/
Пікірлер: 238
I appreciate you showing some of the cheaper alternatives especially for us DIYers, thanks Brian 👍😁
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Thanks for the in-depth review Brian.
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Appreciate the box swirling method!
@FABAutomotiveDetailing
Ай бұрын
No problem! Been doing that for years
Thank u for a great video/knowledge. I wished u would have shown us u packing grease & running it after, but DID appreciate u taking it apart & showing us that. Sounds great for us DIY'ers. 👍
@FABAutomotiveDetailing
Ай бұрын
You are welcome! It’s a great polisher for DIYers!
@davidfrank2824
22 күн бұрын
That's exactly what I was going to say. I would have at least liked to know if it sounded different.
@number1pappy
7 күн бұрын
@@davidfrank2824same here.
Thanks for the review. Appreciate the honesty.
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Nice thorough test as always! Looks shockingly good for the money.
@FABAutomotiveDetailing
Ай бұрын
Thanks and yes it is!
Great review Brian. That was super helpful. Please provide an update in the future. Thanks.
@FABAutomotiveDetailing
Ай бұрын
Thank you and will do
I just heard about the Walmart polisher yesterday and I'm glad you did the review. I'm sure a normal 5 in backing plate will work. Thanks FAB.
@FABAutomotiveDetailing
Ай бұрын
I out a Griot’s 3 inch backing plate on it and it fit perfectly.
Thanks for the review Brian, also love amsoil products been using for 20 years great stuff.
@FABAutomotiveDetailing
Ай бұрын
You are welcome! Yes Amsoil is all I use.
Good review. Just want to note that the HF Bauer long throw is a few bucks more and a decent proven polisher-especially with a regrease and 5" backing plate.
@1painter4hire
Ай бұрын
💯 Correct, and I totally agree. I use it for daily for car lot vehicles in the city
Very interesting video! I was not aware Walmart would sell anything like this. Might have to go pick one up just to add an addition to my arsenal! Thanks for the video
@FABAutomotiveDetailing
Ай бұрын
Thank you! Definitely worth taking a look at in my opinion.
Thanks Brian for the great and honest review, that looksa great machine for the beginner/enthusiast
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Yes! Love the Platinum Series. Everything they do is 🔥
@FABAutomotiveDetailing
Ай бұрын
So far I really like it!
Looks like a good starter polisher and changing the grease is a great idea!
@FABAutomotiveDetailing
Ай бұрын
It’s actually a very good polisher
Cool video!! Thank you for posting!
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
great review thanks i've been needing one
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Was looking for the results of regrease. But, great video.
THANKS FOR THE REVIEW!! IM STILL USING MY CRAFTSMAN 7'' SANDER/POLISHER FROM SEARS OVER 25 YEARS NOW!!! MIGHT BE TIME TO UPGRADE TO A SMALLER POLISHER!!! THANKS...
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Nice wanted one as DIY guy thank for sharing
@FABAutomotiveDetailing
Ай бұрын
You are welcome
As you and others have mentioned it looks like a good entry level polisher. Use with something like One and Done and top with Flex Wax you could get a nice finish with some protection. Nice review 👍✌️☮️
@FABAutomotiveDetailing
Ай бұрын
Definitely a great entry level polisher. Thanks brother
Thanks for the review.
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Awesome stuff man!! Definitely gets the job done👍🏻 Every year Walmart has clearance on detailing stuff.. I have found some pretty sweet deals..I can't wait 😁👌
@FABAutomotiveDetailing
Ай бұрын
Thanks! Yes it’s a good little machine!
@billbuss7542
2 күн бұрын
Is your Walmart still carrying some of the new Turtle Wax products, Pure Shine etc?
Great video and good info as welI. We have no wallmart here in Japan otherwise I'd buy it! I bought an Artisan DA from Amazon for $45. Doesn't stall cuts and finishes like a beast.
@FABAutomotiveDetailing
Ай бұрын
Thanks!
Great video thanks for the info 👍
@FABAutomotiveDetailing
Ай бұрын
You are welcome!
Wow, that’s surprising. I’ve been thinking about getting a similar type polisher to use for applying for wax. This will definitely be a contender!
@FABAutomotiveDetailing
Ай бұрын
Yes I was surprised also. This would be a great choice
@TonyVainosky
Ай бұрын
Harbor freight is THE place to go if this (in my opinion) over priced item is in contention for you. HF has their bauer 6 inch DA regularly under $60. Crazy imo to have to literally build/put together something like this
@parker12c
Ай бұрын
I'd go for the Vevor polisher personally
@allenpearson9716
Ай бұрын
@@parker12chow come?
@henryreyes8947
16 күн бұрын
@@TonyVainoskyharbor freight has them for 70 and 90 bucks not to mention Walmart has way more stores than harbor freight
I hate soft start. 😂😂😂. Thanks for the demo. Good job.
@FABAutomotiveDetailing
Ай бұрын
I do! 🤣 You are welcome
Thanks for showing us! I need a smaller machine for Pillars, Bumpers and the like. I bought a budget one sometime ago and although it works I've wanted to throw it across the garage more than once. Can you tell us the Thread Diameter and Pitch for Backing Plates?
@FABAutomotiveDetailing
Ай бұрын
You are welcome. I’m not sure of the threads but during the livestream I was on tonight I took it apart and a Griot’s Garage backing plate fit it perfectly.
Interesting and for about half the price of the Maxshine M8S V2. Early in the video, you took a decibel reading with the factory grease. What is the decibel reading with the Amsoil grease?
@FABAutomotiveDetailing
Ай бұрын
Yeah it’s a great deal! I didn’t take a decibel reading with the new grease.
@purdyboi8078
Ай бұрын
Right?? WTH, that's what I was waiting for also!
Awesome review video! This just might be what I'm looking for. Im a DIY'er and Im currently using a palm sander 😅 for correction and polish. I cant justify hundreds of dollars for something that will only get used a few times a year. Solid video, sir! You earned a subscriber today! Cheers!
@FABAutomotiveDetailing
5 күн бұрын
Thank you and welcome to the FAB Family
@Mowthe
5 күн бұрын
This review really must have made an impact, I cant find this DA in any store, and it's out of stock online! Any other budget friendly Diy-er DAs you reccomend?
I’m happy to see Walmart carrying these things. You should review the HF Bauer Pads.
@FABAutomotiveDetailing
Ай бұрын
Me too! I have looked at the HF pads but never have picked 1 up to test.
@WayneLittle1178
Ай бұрын
Also do a video on the HF Bauer polisher. Maybe a comparison video vs platinum?
@daringlisson9353
Ай бұрын
@@FABAutomotiveDetailing the cutting pads feel very aggressive, but I picked up their light cut and polishing pads. Those feel nice. That light cut is close to the Hex logic orange pad
@clint8503
Ай бұрын
I have hf polisher and pads work well
@purdyboi8078
Ай бұрын
@@FABAutomotiveDetailing Well then...what are you waiting for...get on it!! Lol
Great video on a home DIY machine. My only suggestion would be to hear the difference if any after you repacked it with grease and which grease you used.
@FABAutomotiveDetailing
Ай бұрын
Thank you! Didn’t change the noise but did make the machine a little bit smoother. I use Amsoil grease. Part number GLCCR
@FABAutomotiveDetailing
Ай бұрын
If you’re not an amsoil customer you would have to sign up to be a preferred customer and you will save money. If your interested I can get you my code to use when you sign up
I'd be happy to get the hard water lime scale off the porcelain tub....
I just seen those today..and was kinda impressed they had it..did snag a portable Hart pressure washer in discount isle new. Lol
@FABAutomotiveDetailing
Ай бұрын
I love Walmart clearance isles for that reason. You never know what you might find
Those pads look like they would work on my cordless Vevor polisher machine too. Not that I use it much.
How was its performance and sound level after removing the original grease and properly applying the new grease actually on the gears?
Thank you! I use hexlogic pads but I would like to try something a little cheaper. I will look into these pads. I am afraid of Harbor Freight pads.
@FABAutomotiveDetailing
Ай бұрын
You are welcome. These seem to be well made pads!
Hey Fab, I've been getting online that a rotary and 8mm DA pretty much produce the same results. Is this true? Which of the 2 would you say is better for one steps and with what pad? Uro 50/50 pad? Thank you.
I'll have to pick one up and compare it to the Harbor Freight polisher.
@FABAutomotiveDetailing
Ай бұрын
Good idea!
For the DIY car owner its great.
Nice job on the video!
@FABAutomotiveDetailing
Ай бұрын
Thank you!
I just picked up a bargain at harbor freight for 40 bucks(sale) a short throw Bauer was impressed, not bad for a diyer machine
@FABAutomotiveDetailing
Ай бұрын
That sounds like a great deal!
So here’s the kicker, this or harbor freight, either the 8mm or the 20mm. The 8mm is less than 40 right now and the 20mm has gotten down to $50 before. Pads honestly look great though.
My thoughts are it would be good for applying waxes and sealants. Also if you could swap out for a 3 inch plate it looks like it would be a great 3 inch polisher. Thanks FAB just wanted to put my 2 cents in.
@FABAutomotiveDetailing
Ай бұрын
Oh it’s way more machine then just applying a wax or sealant. This thing has plenty of power to correct any paint. I recently took the backing plate off and put the Griot’s 3 inch backing plate on it no problem at all. Worked perfectly
@JhawkerZ
Ай бұрын
I've been looking for a new 3 inch. I may have to give it a try. And as you said a backup is always good to have.
I can't find it on line? Is there a link?
How about the WM pads on a more expensive DA Polisher? I usually use Lake Country, but needed some pads the other day and needed some, so I went and bought the WM versions.
@FABAutomotiveDetailing
Ай бұрын
They would work just fine on other polishers. They are well made pads
What’s the link for this?
Are they louder with a pad on? Just curious cuz you tested the decibels with a pad on one and not the g6
@FABAutomotiveDetailing
Ай бұрын
No the pad wouldn’t change sound of the motor.
Do you have a link?
Wonder how a disassembly next to a bauer will look?
@FABAutomotiveDetailing
Ай бұрын
That would be interesting
I would love to get one of these polishers. I paid way to much for a polisher from Chemical Guys and it bogs down alot.
@FABAutomotiveDetailing
Ай бұрын
It’s a nice machine!
Thank you for the review. I've only used cordless polishers. When using this polisher do you need to use a special extension cord to keep it from disconnecting?? If so how to avoid accidentally unplugging the polisher? Thanks
@FABAutomotiveDetailing
16 күн бұрын
No just a regular extension chord will work
@ang2202
15 күн бұрын
Thanks
@8:03 I'm super stingy with the thumbs ups i give to videos (maybe 1 every 2 years) but you deserve it. i will be picking up one of these soon. thank you. also, you earned a new subscriber.
@FABAutomotiveDetailing
Ай бұрын
Thank you I really appreciate it! Welcome to the FAB Family
@turboboy0
Ай бұрын
@@FABAutomotiveDetailingI did buy it and just like yours they had plenty of grease but none was on the gears. I put the grease on the gears and put it back together. I’d love to see your results with the db meter again after greasing the gears to see if it did quiet it down so there isn’t 3db noise difference.
Solid video
How much better did it run when you changed the grease?
@FABAutomotiveDetailing
Ай бұрын
I haven’t used it on a panel yet but it felt smoother when I ran it for a second.
Brian, have you ever used a Porter Cable? I hear that it vibrates. It's loud and ergonomically uncomfortable. It's not that cheap either. I still see suppliers selling them in a bundle. I'm asking because I'm looking for something to compare it to. I wouldn't buy it because I already have too many polishers. It's borderline insanity. Right along with the polishes, compounds and ceramic sprays. Nice demonstration bud.
@FABAutomotiveDetailing
Ай бұрын
I have not used the porter cable so I can’t answer that. I don’t need another polisher either but couldn’t pass up testing this one.
can you use this to wax your vehicle too? And what would you recommend for the wax to put on it (assuming it is higher viscosity?) Thanks
@FABAutomotiveDetailing
25 күн бұрын
Yes you can and any liquid wax would work fine
Looks and sounds like the Harbor Freight Bauer polisher I paid 39.99 on sale.
@FABAutomotiveDetailing
Ай бұрын
They actually look different from each other and most polishers sound like this. They may very well have the same internals being they are both made in china.
I bought a Milwaukee 21mm cordless polisher not knowing that I would have been better off buying the 15 as I am fairly new to polishing.. Would you recommend selling the 21 and take the loss, or can I get better results replacing the 6 inch with a 5 inch backing plate?
@FABAutomotiveDetailing
3 күн бұрын
I would definitely switch to a 5 inch backing plate. With the long throw you just have to pay close attention to mirrors, door handles and body lines when you get close to them.
what is that vibration like sound? Before you tried to bog it down. Of course it got worse when you put orrsdure on it. Definitely would swap out the Grease for a higher temp better quality grease
@FABAutomotiveDetailing
Ай бұрын
It was the thin metal the hood is made out of it flexes so easy.
I can’t find it on Walmarts website or in my store. Do you have a link for it or item number? Thanks!
@FABAutomotiveDetailing
Ай бұрын
I don’t have a link. It all depends on your surrounding Walmarts. All of mine in Indiana show in stock.
What kind of machine would you use to buff?A diamond plate tool box on a pickup Truck, I am very curious on what you think.Thank you
@FABAutomotiveDetailing
Ай бұрын
This machine would work but a rotary would be faster on diamond plate.
@martinneps9387
Ай бұрын
Where can I get one of those@@FABAutomotiveDetailing
@FABAutomotiveDetailing
Ай бұрын
@@martinneps9387 Harbor Freight sells them. If that’s all your wanting to use it for there is no reason to buy an expensive brand.
How did the new grease affect it? Any change?
@FABAutomotiveDetailing
Ай бұрын
Made it run a little bit smoother but didn’t seem to change the noise level.
Not bad for the price , do you have the link for the product. Not bad price for a diy
@FABAutomotiveDetailing
Ай бұрын
Not bad at all actually. I do not have the link but it should be in every Walmart
Im going to get one based off your reaction. Did the amsoil quiet it down & which exact grease would you recommend ?
@FABAutomotiveDetailing
Ай бұрын
It’s part number GLCCR. If you sign up as a preferred customer you will get 25% off. The first 6 months should be free and then it’s $20/year after that but you will save that money easily throughout the year. They have the absolute best oils on the market. I’ve been a professional mechanic for over 20 years and it’s all I use. If you do make sure you use my dealer number 5597673 and you will be my customer. If you have any questions let me know. You can get ahold of me on IG or Facebook.
@marquisethomas5611
Ай бұрын
@FABAutomotiveDetailing thank you very much !
@FABAutomotiveDetailing
Ай бұрын
@@marquisethomas5611 You are welcome
I made my own...lol. I couldn't find a six inch where you could use the foam pad, so I made my own and it works gteat.
@FABAutomotiveDetailing
Ай бұрын
I’ve never seen any polisher that is pad specific. Every 6 inch polisher I have used uses a pad be it wool, microfiber or foam.
@stangedude5646
Ай бұрын
@FABAutomotiveDetailing The velcro pads, bro. Most six inch have the bonnets.
@FABAutomotiveDetailing
Ай бұрын
@@stangedude5646 A long time ago they did but all polishers from the last 15-20 years are Velcro. I have a 6 inch Griots Garage Polisher from 2005 that is Velcro.
@stangedude5646
Ай бұрын
@@FABAutomotiveDetailing Got to Oreilly...lol.
I think put a 3inch baking plate and have a 3inch buffer
@FABAutomotiveDetailing
Ай бұрын
I tested it and Griots 3 inch backing plate off the G8 fits it
Can you put a different backing plate on it
@FABAutomotiveDetailing
Ай бұрын
I put a Griot’s 3 inch backing plate on it no problem.
I go Walmart all the time I not see there maybe a super Walmart anyway awesome video and review
@FABAutomotiveDetailing
Ай бұрын
Keep checking I’m sure they will be at yours soon. Thank you
I gotta check out the wal mart isle next grocery trip 😤👍🧼
@FABAutomotiveDetailing
Ай бұрын
Yes sir!
I drink every time he says you guys 🍻
@FABAutomotiveDetailing
Ай бұрын
You will be drunk before it’s over. I don’t know why I say that all the time and I laugh at myself when editing my videos. 🤷
@purdyboi8078
Ай бұрын
...or, when he says 'ex-specially' 😆
Thanks for showing this product cuz I'm in the market for a polisher and don't want to brake the bank
@FABAutomotiveDetailing
20 күн бұрын
You are welcome!
@paulkandas2768
19 күн бұрын
@@FABAutomotiveDetailing i was also wondering if you can use othe brands of polishing pads with this polisher as well
@FABAutomotiveDetailing
19 күн бұрын
@@paulkandas2768 Yes you can
@paulkandas2768
15 күн бұрын
That is awesome and thank you so much for the help
Can I swap out the backing plate for a 5 inch plate?
@FABAutomotiveDetailing
Ай бұрын
I tested this just the other day on a livestream and the Griot’s garage backing plates fit so yes you can.
Thanks for this review. Machimpex USA is the company that owns this brand and other brands. Walmart may have some interest in them as well, who knows...but they sell a lot of things that are probably made in China and rebranded with some of their custom requirements.
@FABAutomotiveDetailing
Ай бұрын
You are welcome. That’s understandable and probably the case.
Ayo have you tried the bauer 20mm throw polisher? How does this compare?
@FABAutomotiveDetailing
16 күн бұрын
I have not. Sorry
Thanks for the review, but I bet the problem comes about an hour into using this polisher when it gets too hot because it's under-powered.
@FABAutomotiveDetailing
Ай бұрын
You are welcome. It’s not under powered at all!
Thank you for the info, anyone have a link to this polisher ?
@FABAutomotiveDetailing
19 күн бұрын
You are welcome. It’s apparently only available in certain markets.
looks like the Bauer from Harbor Freight
I can't find it om Walmarts web sight? Any help?
@FABAutomotiveDetailing
Ай бұрын
I think it all depends on the area where you live. In Indiana it is available ale online and in store.
What kind of warranty? Sorry if you mentioned and I missed it.
@randymacsgarage
Ай бұрын
thought he said new company so it was prob a lifetime whatever that means.
@FABAutomotiveDetailing
Ай бұрын
The paperwork with it does not state a warranty. My guess would be 90 days but I don’t know for sure
Ill stick with the Bauer from Harbor Freight that's seemingly always on sale for under $60
@FABAutomotiveDetailing
Ай бұрын
Nothing wrong with that
@TonyVainosky
Ай бұрын
@@FABAutomotiveDetailing to be clear - didn't intend for my comment to come off as stand-offish. Video was good, 👍
@FABAutomotiveDetailing
Ай бұрын
@@TonyVainosky It’s all good man I didn’t take it that way
Are the pads worth getting in a pinch.
@FABAutomotiveDetailing
23 күн бұрын
In a pinch absolutely. They actually aren’t to bad at all
U can’t use a palm orbital sander , just get the pads
With it's size it looks like it be a good 3 inch
@FABAutomotiveDetailing
Ай бұрын
Yea it would be and very powerful 3 inch at that
Walmart released it where? Just got off Walmart website and could not find this anywhere.
@FABAutomotiveDetailing
Ай бұрын
It’s on the shelves at my Walmart in Indiana.
@FABAutomotiveDetailing
Ай бұрын
www.walmart.com/ip/Platinum-Series-Buffer-Polisher-6-Speed-Dual-Action-for-Car-Detailing-6-inch-5-Piece-Set/5018588282?from=/search
@mhawk8264
Ай бұрын
Link you sent says page cannot be found. Sorry bout that, but ain't seeing it anywhere here in Arkansas. Maybe they are doing some kind of test roll out in some other places.
@FABAutomotiveDetailing
Ай бұрын
@@mhawk8264 It must be I’m not sure. When I put in my zip code on Walmart’s website they pop right up
Harbor Freight has them for $39 on sale.
@FABAutomotiveDetailing
22 күн бұрын
There are a lot of polishers out there this is just one of them. They are not all created equal though
Looks pretty much identical to the Bauer random orbital polisher from Harbor Freight at $69.99
@FABAutomotiveDetailing
Ай бұрын
All these polisher kind of look the same to be honest. Most polishers have the same design to them. I’ve heard the Bauer is good also
@Corvette.Ronnie
Ай бұрын
@@FABAutomotiveDetailing on a different channel, the reviewer took it apart and added a high quality red grease and it was quieter, smoother and ran cooler. I’d bet a lot of these polishers come out of the same factory and are just rebranded.
I think I wanna buy this one 😂
@FABAutomotiveDetailing
16 күн бұрын
It’s surprisingly good
If nothing else, it looks like it would be a cheap polisher for applying waxes and sealants.
@FABAutomotiveDetailing
Ай бұрын
Yes it would be good for that but it corrects paint just as good as the big boys.
Can't find on Walmart huh
@FABAutomotiveDetailing
13 күн бұрын
It’s all about your area and zip code you put in. Put Indianapolis as your city and you will probably see it.
Whats the amsoil grease PN
@FABAutomotiveDetailing
Ай бұрын
It is GLCCR! Are you a Preferred Customer already with Amsoil?
@KompleteKustoms
Ай бұрын
@@FABAutomotiveDetailing i havent pulled the trigger yet on any amsoil products but i need to swap the grease is my Bauer n probably my hercules polishers so ill definitely be looking into and signing up
@FABAutomotiveDetailing
Ай бұрын
@@KompleteKustoms If you sign up for the preferred customer plan use my number 5597673 and you will become my customer. Amsoil is worth every penny and all I use.
@KompleteKustoms
Ай бұрын
@@FABAutomotiveDetailing thank you
@FABAutomotiveDetailing
Ай бұрын
@@KompleteKustoms You are welcome! If you have any questions about any of their products feel free to reach out on IG or Facebook
Was it quieter question mark you never did so that part
@FABAutomotiveDetailing
Ай бұрын
Not really but it did run a little bit smoother
It looks exactly like the one that harbor freight sells.
@FABAutomotiveDetailing
Ай бұрын
Most polishers on the market have the same framework. I have a polisher that is 25 years old that looks like the harbor freight one also but that doesn’t mean they are the same.
Rather get the diy detail brand , than waste my money on that lol
@FABAutomotiveDetailing
Ай бұрын
I love DIY products and there is nothing wrong with you wanting their polisher but it’s not like it’s only a few dollars more than this polisher. It’s $170 more. Is it better? Most likely but this thing has some power for the price and will correct paint very well.
Is anyone else having a hard time finding this? I've stopped at every Wal Mart I can and it's not online!
@FABAutomotiveDetailing
Ай бұрын
It’s in stock in Indiana. Use my zip code online. It’s 46140 and see if it pops up
First!!!
Im afraid of burning the paint.
@FABAutomotiveDetailing
5 күн бұрын
It can be done but if you keep your hands moving and use common sense then you will be fine. You would have to sit in one spot for a very long time to burn through.
This is a nothing burger, Harbor freight has the 8mm throw DA on sale this week for $39 and has tons of good mods.
@FABAutomotiveDetailing
Ай бұрын
I disagree! I have used the Bauer and this definitely has more power. This one also accepts Griots backing plates which I found out last night just to see if they would fit. The 2”,3”,5” and 6” all fit it.
@jamesdavies686
Ай бұрын
@@FABAutomotiveDetailing The Bauer also has a universal fit backing plate system. I have the 5" maxshine on mine. Also, when you move way down in backing plate size, you have to change or modify the counter weight or you'll deal with some serious vibration.
Price is right,probably all china.They never mention where product is made.
@FABAutomotiveDetailing
Ай бұрын
I though I did mention it. It is made in china just 95% of all polishers on the market
I'm glad your FILTHY RICH, but in my world, $70 is a LOT OF MONEY!
@FABAutomotiveDetailing
16 күн бұрын
I am rich but not financially. Rich to me means something different than most people. $70 is a lot of money but for a polisher it’s a good price compared to the price of them in the rest of the market.
@JeffreyStrader
16 күн бұрын
@@FABAutomotiveDetailing .......> IF < I were any good with them, I'd get one. My wife's 2019 5th Gen RAM 1500 Bighorn 4x4 has that Black Diamond Crystal Paint that shows EVERY DARN swirl, scratch, nick, ding and dent.....I'd be puffing on that thing for a months straight...LOL!!!
@FABAutomotiveDetailing
16 күн бұрын
@@JeffreyStrader Yeah that’s a beautiful color but man they are hard to keep looking good. They swirl just breathing on them. 😂
@JeffreyStrader
16 күн бұрын
@@FABAutomotiveDetailing brother, I GAVE UP!..LOL!
Save your money until you can afford a mid grade machine.
@FABAutomotiveDetailing
Ай бұрын
This is just as good as all my mid grade machines. I have around 8 machines and this one is right up there with them and you can save money.
@williambell7712
Ай бұрын
@@FABAutomotiveDetailing All that matters is that you are satisfied with the purchase. I learned hard lessons buying the very cheapest or the most expensive. The first will not last long term. And the second has never been worth twice or three times the money.
@FABAutomotiveDetailing
Ай бұрын
@@williambell7712 Oh indefinitely agree with you there. I just like showing people options