Nice hack. Doing this job right now. You saved me time trying to figure out what thread the clutch had. I was hoping it wasn't metric.
@Bruce991 Жыл бұрын
For those wondering, the thread is 16 threads per inch
@shannonrickman76206 ай бұрын
Not all heroes wear capes thank you sir you saved me a week of waiting and about $27
@timbillman44618 ай бұрын
This is what the internet was made for!
@gregoryweber74088 ай бұрын
thanks a ton for the info, i don’t feel like waiting for a puller to show up from amazon either!!
@derek_underwood3 жыл бұрын
Dude I literally just thought of this too!!!! And It worked!! Right F'n On man!!! We are damn near geniuses!!🤘
@jequinlan35 жыл бұрын
Looking around all day today to find that thread at home Depot and Lowe's. Finally just ordered the one online now I find your video!??? Good job wish I found it sooner because I have that in my garage
@flatheadcat78
5 жыл бұрын
It was so random! I had to post it!!!
@HuntedTurkey25 ай бұрын
Thanks for the hack, saved me time and money.
@tylerpripps49694 жыл бұрын
WHY does this have so few views??!! Thanks for sharing this!
@jamesserina682 жыл бұрын
Thank you Sir was a great help saved me time and money thanks again and God bless
@armale993 жыл бұрын
Thanks bro, just what I needed to know
@mrnobody5381 Жыл бұрын
Took two tries, first time just had to double up on thread locker tape. It moved a very small amount at first, but just taking my time at it and it popped off. Was very stuck on. Used wd40 on the back side of it. Not sure if that helped.
@dirtyfacegeorge99383 жыл бұрын
Put Teflon tape on the threads and fill hole with water,and hydro-lock it off this will save possibly damaging the threads,works every time.
@itzstealthy8229
3 жыл бұрын
Like the regular bolt you'd use to screw on the clutch and keep it on?
@dirtyfacegeorge9938
3 жыл бұрын
@@itzstealthy8229 no you'll need a 3/4 fine thread
@itzstealthy8229
3 жыл бұрын
@@dirtyfacegeorge9938 okay how long you think?
@dirtyfacegeorge9938
3 жыл бұрын
@@itzstealthy8229 that trailer ball is probably long enough but I'd go with 6-8"
@itzstealthy8229
3 жыл бұрын
@@dirtyfacegeorge9938 thank you!
@Nate-rd8gn2 жыл бұрын
If this method does not work, remove the spacer bolt he is using inside and pack the hole with bread and keep running the "trailer hitch bolt" in and out to pack it tight.(on my 2000 polaris scrambler the bolt side is 3/4", #16 threads and at least 2.5 inches long. you can use an all thread bolt but it was difficult to find 3/4 all thread. I found the bolt at tractor supply. Lowes and the other hardware and electric supply stores didnt carry anything that size.)Eventually the clutch will pop off with some force so be ready. But I tried with the bolt like this video and it still didnt work. Found the bread method creates a ton of pressure and pops the clutch off. I've seen where you can use grease instead of bread but it's much more messy and the bread seems to work better anyway from my research.
@highlightzilla95813 жыл бұрын
Sweet
@hu4867 ай бұрын
You the man!! Are you out of gainesvile by chance?
@flatheadcat78
7 ай бұрын
Citrus county
@hu486
7 ай бұрын
@@flatheadcat78 gotcha, I grew up in gainesville and also cedar key
@hu486
7 ай бұрын
@@flatheadcat78 thanks for the awesome trick with the receiver ball. Already got my primary off since watching your video
@jandeband2 ай бұрын
I put mine back together and pulleys are out of alignment, must have lost a spacer, what to do ? 😢
@flatheadcat78
2 ай бұрын
It's been way to long ago since I did this but maybe look online for a parts breakdown and see if something is missing
Пікірлер: 31
Nice hack. Doing this job right now. You saved me time trying to figure out what thread the clutch had. I was hoping it wasn't metric.
For those wondering, the thread is 16 threads per inch
Not all heroes wear capes thank you sir you saved me a week of waiting and about $27
This is what the internet was made for!
thanks a ton for the info, i don’t feel like waiting for a puller to show up from amazon either!!
Dude I literally just thought of this too!!!! And It worked!! Right F'n On man!!! We are damn near geniuses!!🤘
Looking around all day today to find that thread at home Depot and Lowe's. Finally just ordered the one online now I find your video!??? Good job wish I found it sooner because I have that in my garage
@flatheadcat78
5 жыл бұрын
It was so random! I had to post it!!!
Thanks for the hack, saved me time and money.
WHY does this have so few views??!! Thanks for sharing this!
Thank you Sir was a great help saved me time and money thanks again and God bless
Thanks bro, just what I needed to know
Took two tries, first time just had to double up on thread locker tape. It moved a very small amount at first, but just taking my time at it and it popped off. Was very stuck on. Used wd40 on the back side of it. Not sure if that helped.
Put Teflon tape on the threads and fill hole with water,and hydro-lock it off this will save possibly damaging the threads,works every time.
@itzstealthy8229
3 жыл бұрын
Like the regular bolt you'd use to screw on the clutch and keep it on?
@dirtyfacegeorge9938
3 жыл бұрын
@@itzstealthy8229 no you'll need a 3/4 fine thread
@itzstealthy8229
3 жыл бұрын
@@dirtyfacegeorge9938 okay how long you think?
@dirtyfacegeorge9938
3 жыл бұрын
@@itzstealthy8229 that trailer ball is probably long enough but I'd go with 6-8"
@itzstealthy8229
3 жыл бұрын
@@dirtyfacegeorge9938 thank you!
If this method does not work, remove the spacer bolt he is using inside and pack the hole with bread and keep running the "trailer hitch bolt" in and out to pack it tight.(on my 2000 polaris scrambler the bolt side is 3/4", #16 threads and at least 2.5 inches long. you can use an all thread bolt but it was difficult to find 3/4 all thread. I found the bolt at tractor supply. Lowes and the other hardware and electric supply stores didnt carry anything that size.)Eventually the clutch will pop off with some force so be ready. But I tried with the bolt like this video and it still didnt work. Found the bread method creates a ton of pressure and pops the clutch off. I've seen where you can use grease instead of bread but it's much more messy and the bread seems to work better anyway from my research.
Sweet
You the man!! Are you out of gainesvile by chance?
@flatheadcat78
7 ай бұрын
Citrus county
@hu486
7 ай бұрын
@@flatheadcat78 gotcha, I grew up in gainesville and also cedar key
@hu486
7 ай бұрын
@@flatheadcat78 thanks for the awesome trick with the receiver ball. Already got my primary off since watching your video
I put mine back together and pulleys are out of alignment, must have lost a spacer, what to do ? 😢
@flatheadcat78
2 ай бұрын
It's been way to long ago since I did this but maybe look online for a parts breakdown and see if something is missing
Nice hack
what size ball was it
@flatheadcat78
4 жыл бұрын
It was a 2" ball, 3/4" shank i believe