Polaris 400 Shifter Repair
Автокөліктер мен көлік құралдары
In the middle of a job and the old Polaris gets stuck in low gear. No time to wait for parts and who knows if the used part I get is worth the time waiting on delivery. I completely disassemble this shifter clean and repair all the damaged parts.
Пікірлер: 18
I had gone through the same problem with my 94 Polaris like yours I found out it was all rusty inside the shifter box I had to clean it out and added gear oil in it and did what I can Make sure all the springs and ball bearings was all moving
Love the video buddy. Love how it’s non-edited . Love to see it’s not only me with things flying all over and losing parts to what I call The Land Of Make-believe.
@MrFixit1
2 жыл бұрын
Just keeping it real. Thanks for watching.
Service manual calls for 0W-40 to cover half of the pins - not stuffing all that grease in it.
@MrFixit1
Жыл бұрын
Make sure you replace the o-rings on the actuator shafts or it will leak out.
@Kingsoupturbo
5 ай бұрын
@@MrFixit1 I did my O-rings and filled it to spec with oil and it still leaks, it might be getting grease down the line as well.
Good job, not looking forward to taking mine apart, doesn't shift until exhaust, beside the shifter, warms it up in colder weather, Ontario, Canada
@MrFixit1
11 ай бұрын
Too cold for me Friend! Haha
hey, nice repair job on the shifter, i was wondering what's in the plastic cup to harden the pins, my shifter is acting up now from plowing snow, i just might need to do a tear down soon
@MrFixit1
Жыл бұрын
Used engine oil. Thanks for watching.
Ive got a sloppy shifter, on my recently acquired , 99 sportsman 500, easy fix, rebuild or replace ?
@MrFixit1
9 ай бұрын
Not a lot you can do to fix it. Best to replace it. The pin that runs through the ball on the lever may be broken or loose. I would check that.
Mr fix it, how in the hell did you get the 2 linkage rods off the shifter?? Thanks!
@MrFixit1
2 жыл бұрын
They were held in by a bolt and nut. 7/16 I believe.
Maybe put a grease nipple in the taped hole
@MrFixit1
9 ай бұрын
the threaded hole is blocked by the pin.
Imagine that. Working on polaris about like owning a harley
@MrFixit1
2 жыл бұрын
ha ha Polaris is the Harley of the ATV world for sure.